GB/T 28864.1-2012 English PDFUS$454.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 28864.1-2012: Terms and nomenclature for cores made of magnetically soft ferrites -- Part 1: Terms used for physical irregularities Status: Valid
Basic dataStandard ID: GB/T 28864.1-2012 (GB/T28864.1-2012)Description (Translated English): Terms and nomenclature for cores made of magnetically soft ferrites -- Part 1: Terms used for physical irregularities Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: L17 Classification of International Standard: 29.100.10 Word Count Estimation: 23,247 Adopted Standard: IEC 60401-1-2002, IDT Regulation (derived from): National Standards Bulletin 2012 No. 28 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the ferrite (magnetic oxide) Magnetic hearts of the most common surface defects, physical defects and defects in shape nomenclature. Most defects supplemented by illustrations. Indicate the exact location of the defect, the common GB/T 28864.1-2012: Terms and nomenclature for cores made of magnetically soft ferrites -- Part 1: Terms used for physical irregularities---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Terms and nomenclature for cores made of magnetically soft ferrites Part 1. Terms used for physical irregularities ICS 29.100.10 L17 National Standards of People's Republic of China Ferrite core Definition Part 1. terms of physical defects Part 1. Termsusedforphysicalirregularities (IEC 60401-1.2002, IDT) Issued on. 2012-11-05 2013-02-15 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordGB/T 28864 "ferrite core definitions of the terms" is divided into three parts. --- Part 1. terms of physical defects; --- Part 2. Dimensions; --- Part 3. Transformers and inductors factory core catalog guidance concerning ferrite material information. This section GB/T 28864 Part 1. This section based on GB/T 1.1-2009 given rule drafting. This section uses the translation method is equivalent to using IEC 60401-1.2002 "ferrite core definitions of terms - Part 1. Physical defect surgery language". For ease of use, this part of IEC 60401-1.2002 made the following editorial changes. --- "This International Standard" be replaced by "this section"; --- Delete international standards foreword. This part is proposed by the Ministry of Industry and Information Technology of the People's Republic of China. This part of the National Magnetic components and ferrite materials Standardization Technical Committee (SAC/TC89) centralized. This section drafted by. China Electronics Science and Technology Corporation ninth Institute. The main drafters of this section. Yu Guojun, Hu Bin. Ferrite core Definition Part 1. terms of physical defects1 ScopeThis section GB/T 28864 specifies the ferrite (magnetic oxide) in the magnetic core of the most common surface defects, bulk defects and defect shape Nomenclature. Most defects supplemented by illustrated. For the exact location of the defect specified in the general name of the location and repair more specific location Ornaments combine consistent language program also gives general recommendations. When drafting the technical documentation, defect detection norms, in this section the term party Face a reference.2 GeneralPhysical defects refers to surface defects, bulk defects and shape defects. This refers to the quality defect state core surface, volume or shape of their pre Quality state of inconsistency. These defects macroscopic scale, namely the line of defects in the range of 1μm to several of 10mm. In parts of ferrite material (core), there is a wide variety of surface defects, bulk defects and shape defects, which reduce The quality of the core. Different types of defects often occur simultaneously and cross each other. Each defect is usually one or more of the following factors. inappropriate, incorrect production process, improper handling, grinding, packaging, transport. In addition to the degree of deterioration of the quality and location of defects related, but also the type, extent and coexistence on defects. For certain types of Defect, its position on product quality decrease is particularly evident. In extreme cases, the defect can be harmful and even decisive influence on the electromagnetic properties and mechanical properties of the core. Implementation of core Operations such as marking, winding and assembling defects may also be adversely affected. The current trend is to continuously improve the overall quality of the core, which is the core of the number and severity of defects made more stringent restrictions. This requires a definition of that glossary, which will be the primary basis for processing defects and their location problem. Therefore, the requirements and procedures to check the design and evaluation of defects, the defects located in a specific location as described in more detail, the Department staging We hope to provide a unified reference. This part of the defect classification, method and apparatus for identifying defects and monitoring is useful.3 Basic terms3.1 Surface defects surfaceirregularity Core surface, edges, corners undesired state or appearance. Note. Some surface defects if too serious, so that damage to the core profile and surface, can also be included in the shape defect. 3.2 Shape defect shapeirregularity Non-core or surface contour desired deformation. Note. In some cases, less than the calibration tolerance of shape defect still cause the product to fail. 3.3 Bulk defects bulkirregularity Core internal undesired quality status. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 28864.1-2012_English be delivered?Answer: Upon your order, we will start to translate GB/T 28864.1-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 28864.1-2012_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 28864.1-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
