|
Std ID |
Description (Standard Title) |
|
DL/T 1269-2013
|
Guide of the unit steam blowing for fossil power construction project
|
|
DL/T 1270-2013
|
Load rejection test guide for turbine in fossil fired power construction plant
|
|
DL/T 1271-2013
|
Specification for appraisal of vibrating wire sensor
|
|
DL/T 1275-2013
|
Guide for on-site partial discharge measurement for 1000kV power transformers
|
|
DL/T 1276-2013
|
Specification For 1000kV Busbar Protection Equipment
|
|
DL/T 1277-2013
|
Technical specification of 1100kV a.c.composite hollow insulators
|
|
DL/T 1278-2013
|
Code of operation for submarine power cables
|
|
DL/T 1279-2013
|
Specification of acceptance for submarine power cable line at a rated voltage up to 110 kV
|
|
DL/T 1285-2013
|
Specification of low temperature multiple effect distillation desalination unit
|
|
DL/T 1286-2013
|
Testing guideline of SCR catalysts for thermal power plants
|
|
DL/T 1287-2013
|
Determination of electrical resistivity of coal ash in laboratory
|
|
DL/T 1289-2013
|
Removable steel delivery drums with corrugated flanges for conductors
|
|
DL/T 1290-2013
|
Test method on vacuum tightness of direct air-cooled generating unit
|
|
DL/T 1291-2013
|
Technical specification for electric power Automatic Switched Optical Network(ASON)based on SDH
|
|
DL/T 1299-2013
|
Test guide of the DC de-icer
|
|
DL/T 1300-2013
|
Guideline for Site Impact Test of Gas-insulated Metal-enclosed Switchgear
|
|
DL/T 1301-2013
|
Guideline of DC withstand test for submarine oil-filled power cable
|
|
DL/T 1307-2013
|
Thermal-resistant Aluminum Alloy Conductor Composite Reinforced
|
|
DL/T 1314-2013
|
Technical condition of sustained release ion grounding device in power engineering
|
|
DL/T 1315-2013
|
Technical Permission of Flux for Exothermic Welding in Power Engineering Earthing Installation
|
|
DL/T 333.2-2013
|
Technique requirements of condensate polishing in thermal power plants. Part 2: Air-cooled units
|
|
DL/T 5293-2013
|
Standardized report form of hand-over test for electric equipment electric equipment installation engineering
|
|
DL/T 5300-2013
|
Specification for construction quality checkout and evaluation of 1000kV overhead transmission line
|
|
DL/T 561-2013
|
Guide for chemical supervision of water and steam in thermal power plant
|
|
DL/T 615-2013
|
Guide to the selections of characteristic quantities of HV AC circuit-breakers
|
|
DL/T 696-2013
|
Flexible bus fittings
|
|
DL/T 697-2013
|
Inflexible bus fittings
|
|
DL/T 728-2013
|
Choose guide of gas-insulated metal-enclosure switchgear
|
|
DL/T 805.3-2013
|
Guide line for cycle chemistry in fossil plants. Part 3: Caustic treatment for drum units
|
|
DL/T 805.5-2013
|
Guideline for cycle chemistry in fossil plants. Part 5: All volatile treatment for drum units
|
|
DL/Z 1262-2013
|
Technical guide on anticorrosive measures for on-duty wet chimney
|
|
DL 5270-2012
|
Test code for density and moisture by nuclear methods
|
|
DL/T 1151.10-2012
|
Analytical methods of scale and corrosion products in power plants. Part 10: Determination of silica (silica dioxide)
|
|
DL/T 1151.11-2012
|
Analytical methods of scale and corrosion products in power plants. Part 11: Determination of zinc oxide content
|
|
DL/T 1151.1-2012
|
Analytical methods of scale and corrosion products in power plants. Part 1: General rule
|
|
DL/T 1151.12-2012
|
Analytical methods of scale and corrosion products in power plants. Part 12: Determination of phosphoric anhydride
|
|
DL/T 1151.13-2012
|
Analytical methods of scale and corrosion products in power plants. Fart 13: Determination of sulfuric acid anhydride. Photometric method used to barium sulfate
|
|
DL/T 1151.14-2012
|
Analytical methods of scale and corrosion products in power plants. Part 14: Determination of sulfuric anhydride. Photometric method using barium chromate
|
|
DL/T 1151.15-2012
|
Analytical methods of scale and corrosion products in power plants. Part 15: Preparation of water-soluble scaling preparative test solution
|
|
DL/T 1151.16-2012
|
Analytical methods of scale and corrosion products in power plants. Part 16: Test of alkali, carbonate, bicarbonate in water-soluble scaling
|
|
DL/T 1151.17-2012
|
Analytical methods of scale and corrosion products in power plants. Part 17: Determination of chloride in deporsit-forming impuritied in steam
|
|
DL/T 1151.18-2012
|
Analytical methods of scale and corrosion products in power plants. Part 18: Determination of sodium oxide in deposit-forming impuried in steam
|
|
DL/T 1151.19-2012
|
Analytical methods of scale and corrosion products in power plants. Part 19: Determination of other components in deporsit-forming impuritied in steam
|
|
DL/T 1151.20-2012
|
Analytical methods of scale and corrosion products in power plants. Part 20: Determination of carbon dioxide in carbonate scale
|
|
DL/T 1151.21-2012
|
Analytical methods of scale and corrosion products in power plants. Part 21: Determiuation of metal-element contents. Inductively coupled plasma atomic emission spectroscopy (ICP-AES)
|
|
DL/T 1151.2-2012
|
Analytical methods of scale and corrosion products in power plants. Part 2: Sampling and dissolving method for scale and corrosion products
|
|
DL/T 1151.22-2012
|
Analytical methods of scale and corrosion products in power plants. Part 22: Standard test methods of X-ray fluorescence spectrometry and X-ray diffraction
|
|
DL/T 1151.3-2012
|
Analytical methods of scale and corrosion products in power plants. Part 3: Determination of moisture content
|
|
DL/T 1151.4-2012
|
Analytical methods of scale and corrosion products in power plants. Part 4: Determination of the loss (increase) on ignition
|
|
DL/T 1151.5-2012
|
Analytical methods of scale and corrosion products in power plants. Part 5: Determination of iron oxide
|
|
DL/T 1151.6-2012
|
Analytical methods of scale and corrosion products in power plants. Part 6: Determination of aluminum oxide
|
|
DL/T 1151.7-2012
|
Analytical methods of scale and corrosion products in power plants. Part 7: Determination of copper. Spectrometric method
|
|
DL/T 1151.8-2012
|
Analytical methods of scale and corrosion products in power plants. Part 8: Determination of copper. Iodimetry
|
|
DL/T 1151.9-2012
|
Analytical methods of scale and corrosion products in power plants. Part 9: Determination of calcium and magnesium oxide
|
|
DL/T 1160-2012
|
The code of erection and acceptance for arc spraying on boiler heating surface of power plant
|
|
DL/T 1161-2012
|
The technical inspection codes for metal and structural components in ultra-supercritical units
|
|
DL/T 1162-2012
|
Method for steam oxidation test of metallic materials for fossil power plants
|
|
DL/T 1175-2012
|
Technical requirements of fabric and bag of the bag house for thermal power plants
|
|
DL/T 1191-2012
|
Inspection regulation of hand-held electric power tools safety performance for electrical engineering
|
|
DL/T 244-2012
|
Performance test code on direct air-cooled system
|
|
DL/T 253-2012
|
Measurement Method for Earth Resistance, Ground Potential Distribution, Step Voltage and Current Dividing on Earth Electrodes
|
|
DL/T 258-2012
|
Determination of free silica in coal
|
|
DL/T 260-2012
|
Performance checkup test code for flue gas denitration equipment of coal-fired power plants
|
|
DL/T 265-2012
|
Field test guide on the on-load tap-changer for transformer
|
|
DL/T 266-2012
|
Guide for measurement of impulse grounding grid parameters
|
|
DL/T 5275-2012
|
Code for construction quality checkout and evaluation of earth electrode in DC transmission system at ±800kV and below
|
|
DL/T 760.3-2012
|
Grading ring, shielding ring, grading and shielding ring
|
|
DL/T 899-2012
|
Loading tests on tower and pole structures of overhead line
|
|
DL/T 618-2011
|
Guide for hand-over test of gas-insulated metal-enclosed switchgear on site
|
|
DL/T 309-2010
|
Execution guide for field test of 1000kV AC system power equipment
|
|
DL/T 313-2010
|
Technical specification for field inspection of 1000kV power transformers
|
|
DL/T 353-2010
|
Guide for HVDC measuring equipment maintenance
|
|
DL/T 356-2010
|
Calibration specification of partial discharge measuring devices
|
|
DL/T 385-2010
|
Determination of electrostatic charging tendency of transformer oil
|
|
DL/T 386-2010
|
Calibration for second derivative flame atomic emission spectrometer
|
|
DL/T 736-2010
|
Specifications for installation and operation of residual current protector in rural grids
|
|
DL/T 1114-2009
|
Steel-work corrosion and protection-test methods for thermal spraying(Zinc, aluminium and their alloys)
|
|
DL/T 1129-2009
|
Stardard for hand-over test of DC converter station secondary electric equipment
|
|
DL/T 1130-2009
|
System Test Standard for HVDC Project
|
|
DL/T 1131-2009
|
System Test Standard for ±800kV HVDC Project
|
|
DL/T 1138-2009
|
Powdered ion-exchange resins used in water treatment of thermal power plants
|
|
DL/T 677-2009
|
Checking and calibration code for on-line chemical monitoring instrument of power plant
|
|
DL/T 1082-2008
|
Technical requirement of high voltage laboratory
|
|
DL/T 1042-2007
|
Determination of octaamine in water
|
|
DL/T 1076-2007
|
Guideline for the commissioning of chemistry system in power plants
|
|
DL/T 1077-2007
|
Determination for organic leachables of styrene ion exchanges resins (Dynamic)
|
|
DL/T 523-2007
|
Practice evaluation and testing method of inhibitors for chemical cleaning
|
|
DL/T 1002-2006
|
Calibration for low-level dissolved oxygen meter. Standard gases calibration
|
|
DL/T 1027-2006
|
Acceptance test specification of industrial cooling tower
|
|
DL/T 1029-2006
|
Laboratory quality management guide for water quality analyzers in thermal power plant
|
|
DL/T 417-2006
|
Guide for partial discharge measuring of power equipment
|
|
DL/T 502.11-2006
|
Analytical methods of steam and water in power plants. Part 11: Determination of sulfate (Spectrometric method)
|
|
DL/T 502.1-2006
|
Analytical methods of steam and water in power plants. Part 1: General rule
|
|
DL/T 502.12-2006
|
Analytical methods of steam and water in power plants. Part 12: Determination of sulfate (Volumetric method)
|
|
DL/T 502.13-2006
|
Analytical methods of steam and water in power plants. Part 13: Determination of phosphate (Spectrometric method)
|
|
DL/T 502.14-2006
|
Analytical methods of steam and water in power plants. Part 14: Determination of copper (Spectrometric method using dicyclohexanoneoxalyldihydrazone)
|
|
DL/T 502.15-2006
|
Analytical methods of steam and water in power plants. Part 15: Determination of ammonia (Volumetric method)
|
|
DL/T 502.16-2006
|
Analytical methods of steam and water in power plants. Part 16: Determination of ammonia (Spectrometric method using nessler reagent)
|
|
DL/T 502.17-2006
|
Analytical methods of steam and water in power plants. Part 17: Determination of hydrazine (Direct method)
|
|
DL/T 502.18-2006
|
Analytical methods of steam and water in power plants. Part 18: Determination of hydrazine (Indirect method)
|