GB/T 6467-2010 English PDF

US$209.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 6467-2010: The involute artifact of gear
Status: Valid

GB/T 6467: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 6467-2010	209	Add to Cart	3 days	The involute artifact of gear	Valid
GB/T 6467-2001	239	Add to Cart	2 days	The involute master of gear	Obsolete
GB/T 6467-1986	199	Add to Cart	2 days	The involute master of gear	Obsolete

Similar standards

GB/T 1216   GB/T 22092   GB/T 22097   GB/T 8177   GB/T 8122   GB/T 6468   

Basic data

Standard ID: GB/T 6467-2010 (GB/T6467-2010)
Description (Translated English): The involute artifact of gear
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J42
Classification of International Standard: 17.040.30
Word Count Estimation: 9,961
Date of Issue: 1/10/2011
Date of Implementation: 10/1/2011
Older Standard (superseded by this standard): GB/T 6467-2001
Quoted Standard: GB/T 10095.1-2008; GB/T 17163-2008,
Regulation (derived from): Announcement of Newly Approved National Standards 2011 No. (No. 166 overall) 1
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This Standard specifies involute gear model terms and definitions, types and basic parameters, requirements, and other test methods, marking and packaging. This Standard is applicable to the base back to the radius of not more than 400mm of one and two involute gear model.

GB/T 6467-2010: The involute artifact of gear

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
The involute artifact of gear ICS 17.040.30 J42 National Standards of People's Republic of China Replacing GB/T 6467-2001 Involute model Issued on. 2011-01-10 2011-10-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard replaces GB/T 6467-2001 "involute gear model." This standard and GB/T 6467-2001 compared to the main changes are as follows. --- Redefined related terms; --- Such as model to another level, level 1 model tooth profile shape deviation of up to 1.0μm, 1.4μm, 1.7μm, 2.1μm; --- Level 1 model surface roughness increased from 0.2μm to 0.1μm; --- 4.1 inject allow Class 1 model tooth profile surface parallel to the central axis direction, the presence of less than half a tooth width of the groove or Since the instrument for detecting and filtering effect of frequency response characteristics; --- Top hole surface roughness is reduced from 0.1μm to 0.2μm; --- Top hole cone angle template Technical indicators reference to the requirements; --- Combined the original standard Chapter 5, "technical requirements" and Chapter 6, "other requirements" content; --- Original standard Chapter 7, "acceptance principle" to Chapter 6, "Test Method." The standard proposed by China Machinery Industry Federation. The standard measuring instrument by the National Standardization Technical Committee (SAC/TC132) centralized. This standard is drafted by. China Institute of Metrology. Participated in the drafting of this Standard. China Institute of Metrology, Harbin Measuring & Cutting Tool Group Co., Ltd., Beijing Branch in Sunny Since Technologies Co., Ltd., Zhejiang Institute of Metrology, Ltd. Harbin precision of measuring instruments. The main drafters of this standard. Zhao Jun, Ma Zhongxiang, Liu, Zhang Heng, Li Rui, Sun Xiuwen, Chenxian Min, Chen Hongan, Mao Zhenhua, according to Xu dry, Wei Tianshui. This standard replaces the standards previously issued as follows. --- GB/T 6467-1986, GB/T 6467-2001. Involute model

1 Scope

This standard specifies the terms and definitions line gear template, type and basic parameters of involute, requirements, and other test methods, marking and packaging.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 10095.1-2008 Cylindrical gear accuracy system - Part 1. Definitions tooth surface deviation and ipsilateral tooth allowable value (ISO 1328-1.1995, IDT) GB/T 17163-2008 dimensional measuring instruments - Basic terminology

3 Terms and Definitions

GB/T 17163-2008, GB/T 10095.1-2008 established in the following terms and definitions apply to this standard. 3.1 Calibration of various involute standard measuring instruments measuring instruments, mainly for the transmission gear involute parameter value, and indeed correction instrument indication Given instrument indication error. 3.2 When the plane along a fixed cylinder (base cylinder) for pure rolling, the trajectory of the plane on a fixed straight line (line occurs) into the exhibition called Flat tooth surface is perpendicular to the base of the cylindrical axis of the truncated curve is called the involute tooth profile (see Figure 1). θ --- spread angle; ρ --- unfolded length.

1 model base circle involute tooth profile diagram

3.3 Involute line occurs on the base roll over an arc length of circle expands a length to ρ represents; arc length corresponding to the central angle is called spread angle, ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 6467-2010_English be delivered?

Answer: Upon your order, we will start to translate GB/T 6467-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 6467-2010_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 6467-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 6467-2010?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 6467-2010 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.