GB/T 4545-2007 English PDFUS$159.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 4545-2007: Test methods for stress examination of glass containers Status: Valid GB/T 4545: Historical versions
Basic dataStandard ID: GB/T 4545-2007 (GB/T4545-2007)Description (Translated English): Test methods for stress examination of glass containers Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: Y22 Classification of International Standard: 55.100 Word Count Estimation: 6,676 Date of Issue: 2007-12-05 Date of Implementation: 2008-09-01 Older Standard (superseded by this standard): GB/T 4545-1984 Adopted Standard: ASTM C148-2000, MOD Regulation (derived from): China National Standard Approval Announcement2007 No.13 (Total No.113) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the corresponding test methods for optical path difference Bolipingguan annealed condition associated with the measurement. The following two methods can choose to use. Method A: polarizing instrument with a standard piece comparing measurements. Method B: direct measurement using a polarization analyzer. 1. 3 Method A small optical path difference applied to the specimen measuring less than 150nm, Method B for the determination of the optical path difference of less than 565nm in the sample. 1. 3 Determination of glass containers in the bottom of the stress, the thickness of the glass can affect (1) conversion. T GB/T 4545-2007: Test methods for stress examination of glass containers---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Test methods for stress examination of glass containers ICS 55.100 Y22 National Standards of People's Republic of China Replacing GB/T 4545-1984 Bolipingguan stress test methods Posted 2007-12-05 2008-09-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThe revised standard used by the US ASTMC148-00 "Bolipingguan stress test methods." The technical content of this standard is consistent with ASTMC148-00. The main difference between this standard and ASTMC148-00 as follows. --- The standard delete ASTMC148-00 the preamble, this increases the standard directory and preface; --- The standard delete references ASTMC148-00 references to ASTM standards; --- This standard sample ASTMC224 requirements specified in written directly to standard texts; --- The standard delete ASTMC148-00 in imperial units. This standard replaces GB/T 4545-1984 "Bolipingguan stress test methods." This standard and GB/T 4545-1984 compared to the main changes are as follows. --- Increased the determination of the scope of the two methods; --- Increasing the apparent stress the main determining factor; --- Test procedure in more detail than the original standard test procedure according to the different types of samples are described; --- Increasing the precision and bias of the two test methods. The standard proposed by China National Light Industry Council. This standard daily glass enamel by the National Standardization Center. This standard was drafted. Donghua University, the National Optical glass enamels Quality Supervision and Inspection Center. The main drafters of this standard. Tang Lingling, Zhang . This standard replaces the standards previously issued as follows. --- GB/T 4545-1984. Bolipingguan stress test methods1 Scope1.1 standard specifies the corresponding optical path difference between the test methods and Bolipingguan annealed condition regarding measurement. The following two methods selectable use. Method A. using a polarization analyzer and a set of standard sheet comparison measurements. Method B. using a polarization analyzer measured directly. 1.2 A method for the determination of the optical path difference of less than 150nm of samples, Method B for the determination of the optical path difference is smaller than the sample of 565nm. NOTE. Use of these methods measured the apparent stress depends primarily on. (1) a glass stress magnitude and distribution; (2) the thickness of the glass (optical path measurement point); (3) Glass Ingredients. For ordinary soda-lime-silica glass bottles, ingredients affect small, negligible. 1.3 In determining the stress at the bottom of glass containers, the thickness of the glass can affect the conversion formula (1). Where. TR --- true stress level; TA --- apparent stress level; Note. The position of the maximum thickness should be measured in the apparent path difference on. 1.4 Both test method is applicable to evaluate the quality of annealed glass containers, glass containers or glass-like control of the chemical composition of other products the quality of.2 Sample2.1 The specimen shall not Bolipingguan other tests. 2.2 samples to be pre-placed in the laboratory for more than 30min. 2.3 No direct contact with the sample by hand, wear gloves when testing. Method A. the polarization analyzer and a reference standard sheet comparison measurements3 polariscopeThe degree of polarization around 3.1 Horizon is not less than 99%. Horizon measured at least 3.2 than large bottles 51mm. Analysis from the polarizer and the mirror from the observation should be met through the bottle bottom inspection. 3.3 with the optical path difference is sensitive tint 565nm, which is observed in the visual range of the change should be less than the difference between a domain 5nm, its slow axis and the plane of polarization To 45 °, so that visual observation domain produces purple background. Luminance samples measured at least 300cd/m2. Note. The color film path difference between 510nm and 580nm in order to distinguish between colors, ideally 565nm.4 standard sheetUsing a set of not less than five and a known standard glass wafer internal stress, this standard sheet should cover the production of glass containers annealing range, Wafer diameter greater than 76mm, less than 102mm, each piece having a predetermined residual stress, leaving 6.4mm at the edges of an optical path difference Consistency should be not less than 21.8nm, not larger than 23.8nm. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 4545-2007_English be delivered?Answer: Upon your order, we will start to translate GB/T 4545-2007_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 4545-2007_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 4545-2007_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 4545-2007?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 4545-2007 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
