GB/T 6552-2015 English PDF

US$129.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 6552-2015: Glass containers -- Test method for impact resistance
Status: Valid

GB/T 6552: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 6552-2015	129	Add to Cart	3 days	Glass containers -- Test method for impact resistance	Valid
GB/T 6552-1986	199	Add to Cart	3 days	Standard test method for impact resistance of glass containers	Obsolete

Similar standards

GB/T 40913   GB 4544   GB 8058   GB/T 9987   

Basic data

Standard ID: GB/T 6552-2015 (GB/T6552-2015)
Description (Translated English): Glass containers -- Test method for impact resistance
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: Y22
Classification of International Standard: 55.100
Word Count Estimation: 6,640
Date of Issue: 2015-09-11
Date of Implementation: 2016-04-01
Older Standard (superseded by this standard): GB/T 6552-1986
Quoted Standard: GB/T 308; GB/T 699
Regulation (derived from): National Standard Announcement 2015 No.25
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This Standard specifies the test methods for mechanical impact test specimens with a fixed mass of the pendulum, measuring the impact strength of glass containers. This Standard applies to the determination of glass containers and glass containers similar impact strength, does not apply to the determination of the flat glass container impact strength.

GB/T 6552-2015: Glass containers -- Test method for impact resistance

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Glass containers against mechanical impact test method) ICS 55.100 Y22 National Standards of People's Republic of China Replacing GB/T 6552-1986 Glass containers against mechanical impact test method Issued on. 2015-09-11 2016-04-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard replaces GB/T 6552-1986 "Test method for glass containers mechanical shock," compared with the GB/T 6552-1986, the main Technical changes are as follows. --- Increase the scope, normative references, methods overview; --- Increasing the test procedure; --- Increased identify the different points of impact prescribed type of container; --- Increased rupture specimen identification. The standard proposed by China National Light Industry Council. This standard by the National Standardization Technical Committee household glass (SAC/TC377) centralized. This standard was drafted. Donghua University, the National Optical glass enamels for Quality Supervision and Inspection Center, Anhui Deli Daily Glass shares have Limited. Drafters of this standard. Zhang Paganini, Central Sun Bao, Shi Weidong, Zhang Da. This standard was first released in 1986, this is the first revision. Glass containers against mechanical impact test method

1 Scope

This standard specifies the test methods for mechanical impact test specimens with a fixed mass of the pendulum, the measurement of impact strength of glass containers. This standard applies to the determination of the impact strength of glass containers and similar glass containers, flat glass containers does not apply to the impact strength Determination.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 308 Rolling Ball GB/T 699 high-quality carbon structural steel

3 Methods Summary

This method is the use of a metal material such as glass and steel pendulum impact during a very short contact time, raised to the predetermined height of the pendulum with the Some potential energy into kinetic energy and collide with the sample, the greater the impact, in order to simulate glass containers encountered in the transport and use Collision, impact forecasting products of destructive capacity.

4 device

Impact testing machine by the body, dials, and the pendulum protective cover and other components (see Figure 1), shall meet the following requirements. a) Pendulum 1) by the pendulum and pendulum hammer consisting of a mass of 612g ± 4g; 2) impact hammer endpoints nominal diameter steel ball (DW) is 25.4mm, the quality of the ball in line with GB/T 308 requirements; 3) the pendulum center of gravity should be located in the center line of the pendulum, the center of gravity to the distance from the support (L2) of 239mm ± 0.5mm. in During the swing, the center of gravity of the pendulum trajectory should be in the same plane; 4) When the pendulum is in a horizontal state, the hammer endpoint gravity of 4.90N ± 5N; 5) the impact hammer to the end of distance from the support center (L1) of 293mm ± 0.5mm. b) dial 1) should be able to adjust the dial, and the pendulum angle (°) and impact energy (J) indication; 2) when the impact energy is less than 0.54J, its scale interval shall not be greater than 0.06J; when the impact energy is greater than 0.54J, its indexing Value should be less than 0.12J. c) body 1) by the body after the base, column, sample support table, V-shaped specimen holder and a semi-cylindrical abutment member, the height adjustment lever and horizontal adjustment station composition; 2) After the V-shaped seat made of 45 gauge steel, the material shall comply with the technical requirements of GB/T 699. Semi-cylindrical specimens by members of radius R Is 19mm ± 0.3mm, hardness should be HRC40 ~ 45; ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 6552-2015_English be delivered?

Answer: Upon your order, we will start to translate GB/T 6552-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 6552-2015_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 6552-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 6552-2015?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 6552-2015 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.