GB/T 41500-2022 English PDFUS$159.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 41500-2022: Oxide ceramic plunger for plunger pump Status: Valid
Basic dataStandard ID: GB/T 41500-2022 (GB/T41500-2022)Description (Translated English): Oxide ceramic plunger for plunger pump Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: Q32 Word Count Estimation: 7,784 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 41500-2022: Oxide ceramic plunger for plunger pump---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Oxide ceramic plunger for plunger pump ICS 81.060.30 CCSQ32 National Standards of People's Republic of China Oxide ceramic plunger for plunger pump Published on 2022-04-15 2022-11-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration forewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents" drafted. Please note that some content of this document may be patented. The issuing agency of this document assumes no responsibility for identifying patents. This document is proposed by China Building Materials Federation. This document is under the jurisdiction of the National Industrial Ceramics Standardization Technical Committee (SAC/TC194). This document is drafted by. Hefei Jingchuang Technology Co., Ltd., Yangzhou Oilfield Jinda Industrial Co., Ltd., Hubei Xitian Technology Co., Ltd., Baoji Petroleum Machinery Co., Ltd., Xiamen Shengzhong Ceramic Valve Technology Co., Ltd., Dezhou Haihua Petroleum Machinery Co., Ltd., Xinxiang Dachang Precision Ceramic Technology Co., Ltd., Xinxiang Guyuan Ceramic Technology Co., Ltd., China Building Materials Inspection and Certification Group Zibo Co., Ltd., Shandong Industrial Technology Co., Ltd. Industrial Ceramics Research and Design Institute Co., Ltd., Lujiang County Xinhong High Pressure Reciprocating Pump Valve Factory, Chaohu College. The main drafters of this document. Zhang Xu, Xu Yan, Xu Xiaoyong, Huang Zhisui, Wu Ping, Chen Changzhu, Huang Xian, Li Chuan, Regulations, Yu Jun, Xing Changsheng, Full army. Oxide ceramic plunger for plunger pump1 ScopeThis document specifies the product classification and marking, technical requirements, test methods, inspection rules, marking, packaging, transport and storage. This document is applicable to oxide ceramic plungers for reciprocating plunger pumps (hereinafter referred to as "plungers"), and other plungers for pumps can refer to this document.2 Normative referencesThe contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document. GB/T 6569 Test method for bending strength of fine ceramics GB/T 10610 Product Geometric Specifications (GPS) Rules and Methods for Evaluating Surface Structure by Surface Structure Profile Method GB/T 16534 Test method for hardness of fine ceramics at room temperature GB/T 17991 Fine Ceramic Terminology GB/T 23806 Fracture toughness test method of fine ceramics Single-sided pre-cracked beam (SEPB) method GB/T 25995 Test method for density and apparent porosity of fine ceramics JC/T 2345 Test method for normal temperature wear resistance of fine ceramics3 Terms and DefinitionsThe terms and definitions defined in GB/T 17991 and the following apply to this document. 3.1 oxideceramicplunger oxideceramicplunger With zirconia and alumina as the main raw materials, it is a fine ceramic product used as a plunger of a plunger pump, which is formed, fired and precisely machined.4 Product classification and marking4.1 Product Classification According to the plunger material, it is divided into three categories. zirconia (Z), zirconia toughened alumina (ZTA) and alumina (A). 4.2 Product marking Labeling order. product name, category code, product size. Example. Plunger diameter (D) 50mm, total length (L) 350mm, made of zirconia toughened alumina plunger, marked as. plunger ZTA-Φ50/350.5 Technical requirements5.1 Appearance quality The surface of the plunger should be free of pinholes, spots, defects and cracks visible to the naked eye. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 41500-2022_English be delivered?Answer: Upon your order, we will start to translate GB/T 41500-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 41500-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 41500-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
