GB/T 40344.1-2021 English PDF

US$474.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 40344.1-2021: Vacuum technology - Standard methods for measuring vacuum-pump performance - Part 1: General description
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 40344.1-2021	474	Add to Cart	5 days	Vacuum technology - Standard methods for measuring vacuum-pump performance - Part 1: General description	Valid

Similar standards

TSG 71   HG/T 6093   GB 19815   GB/T 40344.4   GB/T 40344.3   GB/T 40333   

Basic data

Standard ID: GB/T 40344.1-2021 (GB/T40344.1-2021)
Description (Translated English): Vacuum technology - Standard methods for measuring vacuum-pump performance - Part 1: General description
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J78
Word Count Estimation: 26,265
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 40344.1-2021: Vacuum technology - Standard methods for measuring vacuum-pump performance - Part 1: General description

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Vacuum technology - Standard methods for measuring vacuum-pump performance - Part 1.General description ICS 23.160 J78 National Standards of People's Republic of China Standard method for measuring performance of vacuum pumps in vacuum technology Part 1.General requirements (ISO 21360-1.2020, IDT) Released on 2021-08-20 2022-03-01 implementation State Administration of Market Supervision and Administration Issued by the National Standardization Management Committee

Table of contents

Foreword Ⅲ Introduction Ⅳ 1 Scope 1 2 Normative references 1 3 Terms and definitions 1 4 Symbol 3 5 Test method 4 5.1 Measuring volume flow rate (pumping speed) by flow method 4 5.1.1 Overview 4 5.1.2 Test cover for flow method 4 5.1.3 Test device 5 5.1.4 Determination of volume flow rate 6 5.1.5 Measurement Step 7 5.1.6 Measurement uncertainty 7 5.1.7 Measurement evaluation 7 5.2 Measuring volume flow rate (pumping speed) by small hole method 7 5.2.1 Overview 7 5.2.2 Test cover for small hole method 8 5.2.3 Measuring device 8 5.2.4 Determination of volume flow rate 9 5.2.5 Small hole method measurement step 9 5.2.6 Adjustment of pressure measuring instruments 10 5.2.7 Measurement of volume flow rate 10 5.2.8 Measurement uncertainty 10 5.2.9 Measurement evaluation 10 5.3 Measurement of volume flow rate (pumping speed) by pumping method 11 5.3.1 Overview 11 5.3.2 Test cover for air extraction method 12 5.3.3 Snap Action Valve 12 5.3.4 Measuring device 12 5.3.5 Determination of volume flow rate 12 5.3.6 Measurement steps 14 5.3.7 Scope of application 14 5.3.8 Measurement and evaluation 14 5.3.9 Measurement uncertainty 14 5.4 Base pressure measurement 14 5.4.1 Operating conditions 14 5.4.2 Test steps under base pressure > 10-4Pa 15 5.4.3 Test steps under base pressure < 10-4Pa 15 5.4.4 Measurement evaluation 15 5.5 Compression ratio and critical foreline pressure measurement 15 5.5.1 Measuring device 15 5.5.2 Determination of compression ratio and critical foreline pressure 16 5.5.3 Measurement procedure 16 5.5.4 Measurement uncertainty 17 5.5.5 Measurement and evaluation 17 5.5.6 Special recommendations when measuring extremely high compression ratios 17 Appendix A (informative appendix) Mean free path of some important gases 18 Appendix B (Informative Appendix) Measurement Uncertainty 19 Reference 21

Foreword

GB/T 40344 "Vacuum Technology Vacuum Pump Performance Measurement Standard Method" plans to release the following parts. ---Part 1.General requirements; ---Part 2.Volumetric vacuum pump; ---Part 3.Specific parameters of mechanical booster pumps; ---Part 4.Turbo molecular pump; This part is Part 1 of GB/T 40344. This section was drafted in accordance with the rules given in GB/T 1.1-2009. The translation method used in this part is equivalent to the ISO 21360-1.2020 ``Standard Methods for Measuring the Performance of Vacuum Pumps in Vacuum Technology Part 1. total requirements". The Chinese documents that have a consistent correspondence with the international documents cited in this section are as follows. ---GB/T 3163-2007 vacuum technical terms (ISO 3529.1981, MOD). This section has made the following editorial changes. ---Chapter 4 adds the number and title of the table. This part was proposed by China Machinery Industry Federation. This part is under the jurisdiction of the National Vacuum Technology Standardization Technical Committee (SAC/TC18). Drafting organizations of this section. Zhejiang Vacuum Equipment Group Co., Ltd., Zibo Vacuum Equipment Factory Co., Ltd., Taizhou Xingguang Vacuum Equipment Manufacturing Co., Ltd. Manufacturing Co., Ltd., Hunan Vigor Magnetic Fluid Co., Ltd., Weihai Zhide Vacuum Technology Co., Ltd., Zibo City Electromechanical Pump Product Quality Inspection Research Institute, Beijing Beiyi Innovative Vacuum Technology Co., Ltd., Taizhou Global Vacuum Equipment Manufacturing Co., Ltd., Huizhou Feikai New Materials Co., Ltd. Co., Ltd., Shandong Bozhong Vacuum Equipment Co., Ltd., Shenyang Vacuum Technology Research Institute Co., Ltd. The main drafters of this section. Zhong Yunhui, Luo Gensong, Yang Huafei, Gao Xunyi, Xu Tao, Xu Fajian, Huang Zhiting, Zhou Fashun, Chen Haiyao, Yan Jichun, Wang Gongfa, Lin Lezhong, Zhang Sheng, Jiang Yunfeng, Hou Ronghua, Wang Hongxue, Zhao Weisheng, Zhao Jichun, Qian Tianjing, Chen Xiuming, Lei Chundong, Wang Lingling.

Introduction

This part is the basic standard for measuring the performance data of vacuum pumps. The methods specified in this section comply with existing national standards and international standards. Relevant regulations. The purpose of this section is to provide a document for measuring the performance data of vacuum pumps and to simplify the future evaluation of specific vacuum pumps. Standard formulation. The specific vacuum pump standard should include selecting the appropriate measurement method from this section, and determining the performance according to the characteristics of the specific vacuum pump Data, limit values, specific operating conditions. When there is a difference between a specific standard and this section, the specific standard shall prevail. Standard method for measuring performance of vacuum pumps in vacuum technology Part 1.General requirements

1 Scope

This part of GB/T 40344 specifies three volume flow rate measurement methods, and respectively specifies the measurement of base pressure and compression ratio of vacuum pumps. And the method of critical foreline pressure. The first method of measuring volume flow rate (flow method) is a basic method. inject a stable flow of gas into the vacuum pump, and measure at the same time The inlet pressure of the pump. In actual measurement, the measurement of gas flow may be complicated or inaccurate. For this reason, two other methods are prescribed to Avoid measuring flow directly. The second method of measuring volume flow rate (small hole method) is suitable for very low inlet pressure (high vacuum or ultra-high vacuum) and very small flow rate Case. The method is based on measuring the pressure ratio in the double test chamber of the test enclosure. The test cover is divided into two by a thin wall with a round hole Chamber. The third method of measuring volume flow rate (pumping method) is based on the method of evacuating large vessels, which is very suitable for automated measurement. pass through The two pressure values before and after the pumping interval and the volume of the test cover are used to calculate the volume flow rate. The measurement results and the final volume flow rate are affected by different Conditional influences, such as leakage rate and outgassing rate, gas cooling due to close to isentropic expansion during the pumping interval, and low-pressure molecular flow The flow resistance of the connecting pipeline between the test cover and the vacuum pump increases. The choice of measurement method depends on the properties of the particular type of vacuum pump. For example, only a vacuum pump that needs to be equipped with a backing pump needs to be measured Critical foreline pressure. All measurement parameters of vacuum pumps not specified in this section (such as measurement of power consumption) are specified in the standards of the corresponding pumps. To stipulate.

2 Normative references

The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article Pieces. For undated reference documents, the latest version (including all amendments) is applicable to this document. ISO 3529-2 Vacuum technology terminology Part 2.Vacuum pump and related terms (Vacuumtechnology-Vocabulary- Part 2.Vacuumpumpsandrelatedterms)

3 Terms and definitions

The terms and definitions defined in ISO 3529-2 and the following apply to this document. The address of the terminology database maintained by ISO and IEC for standardization is as follows. 3.1 Volume flow rate qV qV= dV dt ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 40344.1-2021_English be delivered?

Answer: Upon your order, we will start to translate GB/T 40344.1-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 40344.1-2021_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 40344.1-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.