GB/T 38337-2019 English PDF

US$599.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 38337-2019: General specification for ultrasonic motor and driver
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 38337-2019	599	Add to Cart	5 days	General specification for ultrasonic motor and driver	Valid

Similar standards

GB/T 22712   GB/T 39631   JB/T 9542   GB/T 16439   GB/T 13537   

Basic data

Standard ID: GB/T 38337-2019 (GB/T38337-2019)
Description (Translated English): General specification for ultrasonic motor and driver
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: K24
Classification of International Standard: 29.160.30
Word Count Estimation: 30,393
Date of Issue: 2019-12-10
Date of Implementation: 2020-07-01
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 38337-2019: General specification for ultrasonic motor and driver

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(General specifications of ultrasonic motor and its driving controller) ICS 29.160.30 K24 National Standards of People's Republic of China Ultrasonic motor and its driving controller General technical conditions 2019-12-10 release 2020-07-01 implementation State Administration of Market Supervision Published by the National Standardization Management Committee

Contents

Foreword I 1 Scope 1 2 Normative references 1 3 Terms and definitions 2 4 Classification and basic parameters 3 5 Operating conditions 4 6 Technical requirements and test methods 5 7 Inspection rules 15 8 Preparation for delivery 18 9 Quality Assurance Period 19 Appendix A (informative) Model designation of rotary ultrasonic motors 20 Appendix B (Informative) Model Nomenclature Method for Rotary Ultrasonic Motor Drivers 22 Appendix C (Normative Appendix) Rotary Ultrasonic Motor Basic Outline Structure Type 23 Appendix D (Normative Appendix) Standard Test Stands and Fixtures for Rotary Ultrasonic Motors 26

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard was proposed by the China Electrical Equipment Industry Association. This standard is under the jurisdiction of the National Micromotor Standardization Technical Committee (SAC/TC2). This standard was drafted. Nanjing University of Aeronautics and Astronautics, Nanjing Hangda Supercontrol Technology Co., Ltd., Jiangsu Zijin Dongfang Ultrasonic Motor Co., Ltd. Division, Xi'an Chuanglian Ultrasound Technology Co., Ltd., Nantong University, Nanjing Chunkong Ultrasonic Motor Research Institute Co., Ltd., Xi'an Micromotor Research Institute, Zhejiang Lianyi Motor Co., Ltd., Southeast University, Zhejiang Julong Automation Equipment Co., Ltd., Shanghai University. The main drafters of this standard. Zhao Chunsheng, Shi Yunlai, Yang Lin, Lu Xiaolong, Su Xuntao, Zhang Wu, Gu Juping, Guo Qiaobin, Li Huafeng, Ding Qingjun, Yang Ying, Liang Dazhi, Jin Long, Chen Zhaoming, and Li Chaodong. Ultrasonic motor and its driving controller General technical conditions

1 Scope

This standard specifies the terms and definitions, classifications, operating conditions, technical requirements and test methods of ultrasonic motors and their drive controllers, Inspection rules, delivery preparation and quality assurance period. This standard applies to rotary ultrasonic motors (hereinafter referred to as "ultrasonic motors") and their drive controllers (hereinafter referred to as "drivers"), Refer to the linear ultrasonic motor and its drive controller for reference.

2 Normative references

The following documents are essential for the application of this document. For dated references, only the dated version applies to this article Pieces. For undated references, the latest version (including all amendments) applies to this document. GB/T 755-2008 quota and performance of rotating electrical machines GB/T 1804-2000 Tolerances for linear and angular dimensions without general tolerances GB/T 2423.1 Environmental test for electric and electronic products Part 2. Test method Test A. Low temperature GB/T 2423.2 Environmental tests for electric and electronic products. Part 2. Test methods Test B. High temperature GB/T 2423.3 Environmental test Part 2. Test method Test Cab. Constant humidity test GB/T 2423.4 Environmental test for electric and electronic products Part 2. Test method Test Db. Alternating damp heat (12h 12h cycle) GB/T 2423.5 Environmental tests Part 2. Test methods Test Ea and guidelines. Impact GB/T 2423.10 Environmental test Part 2. Test method Test Fc. Vibration (sine) GB/T 2423.16 Environmental testing for electric and electronic products. Part 2. Test methods Test J and guide. Chang mold GB/T 2423.17 Environmental test for electric and electronic products Part 2. Test methods Test Ka. Salt spray GB/T 2828.1-2012 Counting sampling inspection procedures Part 1. Batch inspection sampling retrieved by acceptance quality limit (AQL) plan GB/T 2900.25 Electrical term for rotating electrical machines GB/T 2900.26 Electrical term control motor GB/T 5171.1 Low-power motors Part 1. General technical requirements GB/T 5171.21-2016 Low-power motors Part 21. General test methods GB/T 6113.203 Specifications for radio disturbance and immunity measuring equipment and methods Part 2-3. Radio disturbance and immunity Radiation disturbance measurement GB/T 6113.204 Specifications for radio disturbance and immunity measuring equipment and methods Part 2-4. Radio disturbance and immunity Measurement method GB/T 7345-2008 Basic technical requirements for control motors GB/T 7346 basic outline structure type of control motor GB/T 10069.1 Measuring methods and limits for noise from rotating electrical machines. Part 1. Measuring methods for noise from rotating electrical machines GB/T 16439-2009 General technical requirements for AC servo systems GB 17799.3 General standards for electromagnetic compatibility Emissions in residential, commercial and light industrial environments GB 17799.4 Emissions in general electromagnetic standard industrial environment ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 38337-2019_English be delivered?

Answer: Upon your order, we will start to translate GB/T 38337-2019_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 38337-2019_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 38337-2019_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.