GB/T 37353-2019 English PDF

US$199.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 37353-2019: Design guidelines for drill floor structure of self-elevating drilling units
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 37353-2019	199	Add to Cart	3 days	Design guidelines for drill floor structure of self-elevating drilling units	Valid

Similar standards

JT/T 258   GB/T 37335   GB/T 37348   GB/T 37347   

Basic data

Standard ID: GB/T 37353-2019 (GB/T37353-2019)
Description (Translated English): Design guidelines for drill floor structure of self-elevating drilling units
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: U17
Classification of International Standard: 47.020.99
Word Count Estimation: 10,190
Date of Issue: 2019-03-25
Date of Implementation: 2019-10-01
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 37353-2019: Design guidelines for drill floor structure of self-elevating drilling units

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Design guidelines for drill floor structure of self-elevating drilling units ICS 47.020.99 U17 National Standards of People's Republic of China Self-elevating drilling platform rig structure design guide Published on.2019-03-25 2019-10-01 implementation State market supervision and administration China National Standardization Administration issued

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard is proposed and managed by the National Marine Ship Standardization Technical Committee (SAC/TC12). This standard was drafted. Dalian Shipbuilding Industry Group Co., Ltd., China Shipbuilding Industry Corporation 704 Institute. The main drafters of this standard. Wang Haijun, Yang Shuzhen, Li Xinxin, Zhang Ping, Yang Ling, Yang Longxia, Shi Qiqi, Chen Lin. Self-elevating drilling platform rig structure design guide

1 Scope

This standard specifies the structural design basis, design load and design conditions, design method and design check of the jack-up drilling platform. This standard applies to the design of the movable drilling platform structure of the jack-up drilling platform (hereinafter referred to as "platform"), and the drilling platform knot of other types of platforms. The design can be used as reference.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only the dated version applies to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 37331 Self-elevating drilling platform structural material design rules GB/T 37335 Self-elevating drilling platform structure full penetration area design guide GB/T 37347 jack-up rig node structure

3 Terms and definitions

The following terms and definitions apply to this document. 3.1 Drill floor structure drilingfloorstructure Platform structure used to support derricks and other drilling equipment.

4 Design basis

The drawings and technical documents based on the design of the rig floor are as follows. a) technical specifications of the contract; b) Classification of classification society and relevant international conventions and rules; c) drill floor layout; d) Information on drilling equipment (derricks, turntables, winches, etc.).

5 Design load and design conditions

5.1 Design load 5.1.1 Working load The working loads used in the design of the rig floor include, but are not limited to, the following loads. a) fixed load (weight of steel structure and fixture); b) deck loads (personnel, mobile equipment and material weight); c) ice and snow loads (if applicable); ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 37353-2019_English be delivered?

Answer: Upon your order, we will start to translate GB/T 37353-2019_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 37353-2019_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 37353-2019_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.