GB/T 37009-2018 English PDF

US$839.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 37009-2018: Variable-frequency drive for metallurgical industry
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 37009-2018	839	Add to Cart	6 days	Variable-frequency drive for metallurgical industry	Valid

Similar standards

GB/T 39572.1   GB/T 37404   GB/T 31487.3   GB/T 30425   GB/T 37010   

Basic data

Standard ID: GB/T 37009-2018 (GB/T37009-2018)
Description (Translated English): Variable-frequency drive for metallurgical industry
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: K46
Classification of International Standard: 29.240.99
Word Count Estimation: 42,433
Date of Issue: 2018-12-28
Date of Implementation: 2019-07-01
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 37009-2018: Variable-frequency drive for metallurgical industry

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Variable--frequency drive for metallurgical industry ICS 29.240.99 K46 National Standards of People's Republic of China Metallurgical frequency control equipment Published on.2018-12-28 2019-07-01 implementation State market supervision and administration China National Standardization Administration issued

Content

Foreword III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Category 3 5 rating 4 6 Conditions of use 4 7 Technical requirements 8 8 test 22 Appendix A (informative) Common DC bus system configuration and interface requirements 29 Appendix B (informative) Layout and installation in the cabinet 30 Appendix C (Normative) Marking and Packaging 32 Appendix D (informative) Communication link performance 34 Appendix E (informative) Metallurgical typical process section frequency conversion speed equipment performance acceptance index 35 Reference 37

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard was proposed by the China Electrical Equipment Industry Association. This standard is under the jurisdiction of the National Standardization Technical Committee for Frequency Control Equipment (SAC/TC518). This standard was drafted. MCC Southern (Wuhan) Automation Co., Ltd., Tianjin Electric Science Research Institute Co., Ltd., Shenzhen Hewangdian Gas Co., Ltd., Tianshui Electric Transmission Research Institute Co., Ltd., Hope Senlan Technology Co., Ltd., Shandong Taikai Automation Limited company, Tianjin Tianchuan Electronic Control Equipment Testing Co., Ltd., Xinfengguang Electronic Technology Co., Ltd., Shenzhen Kumak New Technology Co., Ltd. Company, Guangzhou Toshiba Baiyun Lingji Power Electronics Co., Ltd., National Electric Control and Distribution Equipment Quality Supervision and Inspection Center, Hubei Province Standardization and Quality Research Institute, Qingdao University. The main drafters of this standard. Wang Shengyong, Wang Chunwu, Zhao Dawei, Wang Youyun, Luo Shen, Liu Shuyu, Wang Peng, Yin Pengfei, Li Ruichang, Zeng Guang, Lu Lin, Xie Qiuqi, Liu Xudong. Metallurgical frequency control equipment

1 Scope

This standard specifies the classification and rating of metallurgical frequency control equipment, operating conditions, technical requirements, test items and signs, packaging, Transportation and storage. This standard applies to the rated input voltage is AC 1kV level and below, the rated input frequency is 50Hz or 60Hz, the output voltage 1kV and below, high-performance, heavy-duty variable frequency speed control equipment with output frequency less than 300Hz.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 3797-2016 Electrical Control Equipment GB/T 4208-2017 enclosure protection grade (IP code) GB/T 4798.2-2008 Environmental conditions for the application of electric and electronic products - Part 2. Transport GB/T 4798.3-2007 Environmental conditions for the application of electric and electronic products - Part 3 GB/T 9969-2008 General instructions for the use of industrial products GB/T 12668.3-2012 Speed control electric drive systems - Part 3. Electromagnetic compatibility requirements and specific test methods GB/T 17626.2-2006 Electromagnetic compatibility test and measurement technology Electrostatic discharge immunity test GB/T 17626.3-2016 Electromagnetic compatibility test and measurement technology RF electromagnetic field radiation immunity test GB/T 17626.4-2008 Electromagnetic compatibility test and measurement technology Electrical fast transient burst immunity test GB/T 17626.5-2008 Electromagnetic compatibility test and measurement technology Surge (impact) immunity test GB/T 17626.6-2008 Electromagnetic compatibility test and measurement technology Conducted disturbance immunity of RF field induction GB/T 18039.4-2003 Compatibility level of low frequency conducted disturbance in electromagnetic compatibility environment factory

3 Terms and definitions

The following terms and definitions apply to this document. 3.1 Overload capability Characterizing the variable frequency speed control equipment, under the specified working conditions, can output more than the rated current within the specified time period without protection. ability. Note 1. The frequency conversion speed control equipment for metallurgy is generally expressed in the form of a cycle. The manufacturer has to give a multiple that exceeds the rated current during this period. The time and the multiple of the relative rated current is not exceeded. During this period, the larger the part exceeding the rated output current, the longer the duration, The stronger the carrying capacity. Note 2. Rewrite GB/T 12668.1-2002, definition 2.5.3. 3.2 Harmonic component harmoniccomponent Any component with a harmonic frequency. The value of the harmonic component is usually expressed as a rms value. [GB/T 12668.3-2012, definition B.2.2.4] Note. For the sake of simplicity, this component can be simply referred to as harmonics. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 37009-2018_English be delivered?

Answer: Upon your order, we will start to translate GB/T 37009-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 37009-2018_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 37009-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.