GB/T 36803-2018 English PDF

US$359.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 36803-2018: Determination of the emissions of volatile organic compounds form adhesive -- Bag method
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 36803-2018	359	Add to Cart	4 days	Determination of the emissions of volatile organic compounds form adhesive -- Bag method	Valid

Similar standards

GB/T 41657   GB 30982   GB/T 31125   GB/T 36799   GB/T 36794   

Basic data

Standard ID: GB/T 36803-2018 (GB/T36803-2018)
Description (Translated English): Determination of the emissions of volatile organic compounds form adhesive -- Bag method
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: G38
Classification of International Standard: 83.180
Word Count Estimation: 18,199
Date of Issue: 2018-09-17
Date of Implementation: 2019-04-01
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 36803-2018: Determination of the emissions of volatile organic compounds form adhesive -- Bag method

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Determination of the emissions of volatile organic compounds form adhesive - Bag method ICS 83.180 G38 National Standards of People's Republic of China Adhesive volatile organic compounds Determination of release amount (ISO 12219-2.2012, Interiorairofroadvehicles-Part 2. Screening fromvehicleinteriorpartsandmaterials-Bagmethod, MOD) Published on.2018-09-17 Implementation of.2019-04-01 State market supervision and administration China National Standardization Administration issued

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard uses the redrafting method to modify the use of ISO 12219-2.2012 "Roads in road vehicles - Part 2. Automotive interiors and materials Determination of volatile organic compounds in the bag method. This standard has more structural adjustments than ISO 12219-2.2012. This standard and ISO 12219-2 are listed in Appendix A. 2012 chapter number comparison list. There are technical differences between this standard and ISO 12219-2.2012. The terms involved in these differences have been passed on the outer side of the page. The vertical single line (∣) of the white position is marked, and a list of the corresponding technical differences and their causes is given in Appendix B. This standard has made the following editorial changes. --- Change the standard name to "Measurement method for the release of volatile organic compounds from adhesives"; --- According to the national conditions, for practical operation, modified Table 1 in ISO 12219-2.2012, as Appendix D "Test Report formula". This standard was proposed by the China Petroleum and Chemical Industry Federation. This standard is under the jurisdiction of the National Adhesive Standardization Technical Committee (SAC/TC185). This standard was drafted. Shanghai Rubber Products Research Institute Co., Ltd., Shenzhen Beizhen Testing Technology Co., Ltd., Shanghai Plastics Research Ltd., IKEA China Testing and Training Center. Drafters of this standard. Shen Yan, Liao Wuming, Zhang Jianqing, Jiang Xiaoxue, Zhou Yehua, Liu Juanji, Zhao Jie. Adhesive volatile organic compounds Determination of release amount

1 Scope

This standard specifies the use of bag method to determine the release of volatile organic compounds (VOC), formaldehyde and other carbonyl compounds in adhesive products. The method of quantity. This standard applies to the measurement of the release of non-polar and weakly polar volatile organic compounds between n-C6 and n-C16 (coating release and residue). I release). The measured concentrations of VOCs, formaldehyde and other carbonyl compounds ranged from μg/m3 to mg/m3.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 2943 Adhesive Terminology GB/T 32371.2 Low-solvent or solvent-free adhesives - Determination of release characteristics - Part 2. Volatility Determination of organic compounds GB/T 32371.3 Low-solvent or solvent-free adhesives - Determination of release characteristics - Part 3. Volatility Determination of aldehydes ISO 16000-3 Indoor air - Part 3. Measurements of release of formaldehyde and other carbonyl compounds from indoor air and test chamber air Active sampling method (Indoorair-Part 3. Determination offormaldehydeandothercarbonylcompoundsin Indoorairandtestchamberair- Activesamplingmethod) ISO 16000-6.2011 Indoor air Part 6. Use of TENAXTA adsorbent activity sampling, thermal desorption and Determination of volatile organic compounds in indoor air and test chamber air by MS or MS-FID gas chromatography (Indoorair-Part 6. Determinationof volatileorganiccompoundsinindoorandtestchamberairbyactivesamplingon TENAXTAsorbent, thermaldesorptionandgaschromatographyusingMSorMS-FID) ISO 16017-1 Volatile organication of indoor, environmental and workplace air by adsorption tube/thermal desorption/capillary gas chromatography Analytical and sampling - Part 1. Suction sampling (Indoor, ambientandworkplaceair-Samplingandanal- Ysisofvolatileorganiccompoundsbysorbenttube/thermaldesorption/capilarygaschromatography-Part 1. Pumpedsampling)

3 Terms and definitions

The following terms and definitions as defined in GB/T 2943 apply to this document. 3.1 Coating release amount applyreleasequantity Adhesive products are tested immediately after application as required, and volatile organic compounds are measured at specific temperature and time conditions. The amount of substance released. Note. The production time of the sample should not exceed 5 minutes. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 36803-2018_English be delivered?

Answer: Upon your order, we will start to translate GB/T 36803-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 36803-2018_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 36803-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.