GB/T 36657-2018 English PDFUS$599.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 36657-2018: Dependability management -- Application guide -- Guide to the specification of dependability requirement Status: Valid
Basic dataStandard ID: GB/T 36657-2018 (GB/T36657-2018)Description (Translated English): Dependability management -- Application guide -- Guide to the specification of dependability requirement Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: L05 Classification of International Standard: 03.100.40; 03.120.01 Word Count Estimation: 30,354 Date of Issue: 2018-09-17 Date of Implementation: 2019-04-01 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 36657-2018: Dependability management -- Application guide -- Guide to the specification of dependability requirement---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Dependability management - Application guide - Guide to the specification of dependability requirement ICS 03.100.40; 03.120.01 L05 National Standards of People's Republic of China Credibility management Application Guide Credibility Requirements Specification Guide (IEC 60300-3-4.2007, Dependabilitymanagement- Part 3-4. Applicationguide- Guidetothespecificationofdependabilityrequirement, IDT) Published on.2018-09-17 Implementation of.2019-04-01 State market supervision and administration China National Standardization Administration issued ContentForeword III Introduction V 1 Scope 1 2 Normative references 1 3 Terms and Definitions 3 4 General requirements for the credibility specification 3 4.1 Credibility Requirements 3 4.2 Requirements and objectives 4 4.3 System 5 4.4 Required verification 6 4.4.1 Concept 6 4.4.2 Activity 6 4.5 Credibility Contract 7 4.6 Specification Type 8 4.7 Formulation of credibility specifications 9 5 Credibility Management 9 6 Availability 10 6.1 Overview 10 6.1.1 Credibility Feature Selection 10 6.1.2 Relationship between availability, reliability and maintainability 10 6.2 Availability Specification 11 6.2.1 Quantitation requirements 11 6.2.2 Qualitative requirements 11 6.3 Availability Verification and Validation 11 6.3.1 Overview 11 6.3.2 Verification and validation by trial 11 6.3.3 Verification and validation by analysis 11 7 Reliability 12 7.1 Overview 12 7.2 Reliability Specification 12 7.2.1 Quantification requirements 12 7.2.2 Qualitative requirements 13 7.3 Reliability Verification and Validation 13 7.3.1 Overview 13 7.3.2 Verification and validation by trial 14 7.3.3 Verification and validation by analysis 14 8 maintainability 14 8.1 Overview 14 8.2 Maintainability Specification 15 8.2.1 Quantification requirements 15 8.2.2 Qualitative requirements 15 8.3 Maintainability Verification and Validation 15 9 Maintenance support 16 9.1 Overview 16 9.2 Maintenance Support Specification 16 9.2.1 Quantification requirements 16 9.2.2 Qualitative requirements 16 9.3 Maintenance Support Verification and Validation 16 Appendix A (informative) Reference Standard for Verification and Validation Techniques 17 Appendix B (informative) Examples of reliability, maintainability, maintenance support, and availability requirements 19 Reference 21ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard uses the translation method equivalent to IEC 60300-3-4.2007 "Trust Management Part 3-4. Application Guide Credibility Seeking a guide to the specification. The documents of our country that have a consistent correspondence with the international documents referenced in this standard are as follows. ---GB/T 2900.13-2008 Electrotechnical terminology credibility and quality of service (IEC 60050-191.1990, IDT) --- GB/T 5080.1-2012 Reliability test Part 1. Test conditions and statistical test principles (IEC 60300-3-5. 2001, IDT) ---GB/T 5080.4-1985 Point Estimation and Interval Estimation Method for Reliability Test of Equipment Reliability Test (Index) Cloth) (IEC 60605-4. 1978, IDT) ---GB/T 5080.5-1985 Equipment reliability test success rate verification test plan (IEC 60605-5. 1982, IDT) ---GB/T 5080.6-1996 Equipment reliability test validity test for constant failure rate assumption (IEC 60605-6.1989, IDT) ---GB/T 5080.7-1986 Equipment reliability test failure rate under the assumption of failure rate and the average time between failures Test protocol (IEC 60605-7. 1978, IDT) ---GB/T 5081-1985 Guidelines for the collection of reliability, availability and maintainability of on-site work in electronic products (IEC 362. 1971, IDT) ---GB/T 6992.2-1997 Credibility Management Part 2. Credibility Outline Elements and Work Items (IEC 60300-2. 1995, IDT) ---GB/T 9414.1-2012 Maintainability Part 1. Application Guide (IEC 60300-3-10.2001, IDT) ---GB/T 9414.2-2012 Maintainability Part 2. Design and development phase maintainability requirements and research (IEC 60706-2. 2006, IDT) ---GB/T 9414.3-2012 Maintainability Part 3. Verification and collection, analysis and presentation of data (IEC 60706-3. 2006, IDT) --- GB/T 9414.7-2000 Equipment maintainability guidelines Part IV. Diagnostic tests (IEC 60706-5.1994, IDT) ---GB/T 9414.9-2017 Maintainability Part 9. Maintenance and repair support (IEC 60300-3-14.2004, IDT) ---GB/T 15174-2017 Reliability Growth Outline (IEC 61014.2003, IDT) ---GB/T 15647-1995 Steady-state availability verification test method (IEC 61070.1991, IDT) ---GB/T 34987-2017 Weibull Analysis (IEC 61649.2008, IDT) ---GB/T 20438.1-2006 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1. General Seeking (IEC 61508-1.1998, IDT) --- GB/T 20438.2-2006 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2. Electrical / Requirements for electronic/programmable electronic safety related systems (IEC 61508-2.2000, IDT) ---GB/T 20438.3-2006 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3 Seeking (IEC 61508-3.1998, IDT) --- GB/T 20438.4-2006 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4. Definitions and Abbreviations (IEC 61508-4.1998, IDT) --- GB/T 20438.5-2006 Functional safety of electrical/electronic/programmable electronic safety related systems - Part 5 Example of a method for full integrity level (IEC 61508-5.1998, IDT) ---GB/T 20438.6-2006 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6 Application Guide for GB/T 20438.2 and GB/T 20438.3 (IEC 61508-6.2000, IDT) --- GB/T 20438.7-2006 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7 Overview of measures (IEC 61508-7..2000, IDT) ---GB /Z 29638-2013 Functional safety function safety concept of electrical/electronic/programmable electronic safety related systems and Overview of GB/T 20438 Series (IEC /T R61508-0.2005, IDT) This standard has made the following editorial changes. --- China's credibility standard system is currently based on an independent standard system structure, in line with China's existing credibility standards system, Remove the "Parts 3-4" from the standard name. Please note that some of the contents of this document may involve patents. The issuing organization of this document is not responsible for identifying these patents. This standard was proposed by the Ministry of Industry and Information Technology of the People's Republic of China. This standard is under the jurisdiction of the National Technical Committee for Reliability and Maintainability of Electrical and Electronic Products (SAC/TC24). This standard was drafted. Electronic Fifth Institute of the Ministry of Industry and Information Technology. The main drafters of this standard. Qi Zhili, Shen Yu, Ji Chunyang, Wang Yuanhang, Huang Yonghua.IntroductionReliability, maintainability and availability are the basic characteristics of the system. These features, together with maintenance support, constitute a system we know well. Believe. In the system, any characteristic of credibility is important, as other characteristics of the system's technical indicators, size and quality, etc. Define and define in the same way. The level of reliability, maintainability, availability, and maintenance support of the system depends on the conditions of use of the system, ie the tasks of the system. section. When system credibility requirements are specified, it is essential to clarify the future storage, transportation, installation and use conditions of the system. important It is necessary to consider the conditions under which the system operates, as well as the system maintenance strategy and maintenance support organization. In order to assess the magnitude of the system's credibility characteristics, the application of statistical models is essential. As with other performance characteristics of the system, the credibility feature can be specified in three ways. 1) specifications written by the supplier; 2) specifications prepared by the purchaser; 3) Specifications negotiated or prepared by the supplier and the purchaser. This standard applies to all three types of specifications described above. IEC 62347 deals with the definition of the system and its components and how these elements are defined. This standard supplements IEC 62347 and The credibility requirements of these elements are specified. The primary task of IEC 62347 is to identify system requirements from a system engineering perspective and A process for converting a purchaser's perspective on the application of a system into a systematically engineered technical overview. IEC 62347 emphasizes the structure of functional implementations and Functional design, through the appropriate selection of hardware, software and personnel factors to achieve the system-related credibility requirements of the purchaser. Credibility management Application Guide Credibility Requirements Specification Guide1 ScopeThis standard gives guidelines for the credibility characteristics specified in the specification, as well as methods and criteria for verification and validation of these characteristics. This standard includes the following. --- Recommendations for specifying quantitative and qualitative requirements for reliability, maintainability, availability and maintenance support; --- System purchaser's advice on how to ensure that the supplier meets the specified requirements; ---Help the supplier to meet the buyer's requirements. Other documents, such as laws and government regulations, may also be required by the system, except for any specifications consistent with this standard. Should be considered for adoption. NOTE 1 Although the system and equipment level reliability is primarily addressed, the methods described in the different sections of IEC 60300 apply equally to the product, unit or component level. The The term system is used throughout this standard. Note 2. This standard does not give an indication of the credibility management program and the activities required to achieve the required availability, reliability, maintainability and maintenance support requirements. south. See these other guidelines for these general guidelines. Note 3. This standard does not directly consider safety and environmental specifications. However, many of the guidelines in this standard also apply to safety or environmental regulations. Note 4. This standard does not consider the credibility norms of services, including the terms of service provided through the procurement of public-private partnerships.2 Normative referencesThe following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. IEC 60050-191 International Electrotechnical Vocabulary (IEV) Chapter 191. Credibility and Quality of Service [International Electro- technicalVocabulary(IEV)-Chapter191.Dependabilityandqualityofservice] IEC 60300-1 Credibility Management Part 1. Trustworthiness Management System (Dependabilitymanagement-Part 1. De- Pendabilitymanagementsystems) IEC 60300-2 Credibility Management Part 2. Trustworthiness Management Guide (Dependabilitymanagement-Part 2. Guidelinesfordependabilitymanagement) IEC 60300-3-1 Credibility Management Part 3-1. Application Guide Credibility Analysis Technical Method Guide (Dependability management-Part 3-1. Applicationguide-Analysistechniquesfordependability-Guideonmethod- Ology IEC 60300-3-2 Credibility Management Part 3-2. Application Guide Site Dependability Data Collection (Dependabilityman- agement-Part 3-2. Applicationguide-Colectionofdependabilitydatafromthefield) IEC 60300-3-3 Credibility Management Part 3-3. Application Guide Life Cycle Costs (Dependabilitymanagement- Part 3-3. Applicationguide-Lifecyclecosting) IEC 60300-3-5 Credibility Management Part 3-5. Application Guide Reliability Test Conditions and Statistical Test Principles (Depend- abilitymanagement-Part 3-5. Applicationguide-Reliabilitytestconditionsandstatisticaltestprin- Ciples) IEC 60300-3-10 Credibility Management Part 3-10. Application Guide Maintainability (Dependabilitymanagement- ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 36657-2018_English be delivered?Answer: Upon your order, we will start to translate GB/T 36657-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 36657-2018_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 36657-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
