GB/T 32829-2016 English PDFUS$219.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 32829-2016: Equipment maintenance and repair process of radio frequency identification technology specification Status: Valid
Basic dataStandard ID: GB/T 32829-2016 (GB/T32829-2016)Description (Translated English): Equipment maintenance and repair process of radio frequency identification technology specification Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J07 Classification of International Standard: 35.240.50 Word Count Estimation: 11,127 Date of Issue: 2016-08-29 Date of Implementation: 2017-03-01 Regulation (derived from): National Standard Notice No. 14 of 2016 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China GB/T 32829-2016: Equipment maintenance and repair process of radio frequency identification technology specification---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Equipment maintenance and repair process of radio frequency identification technology specification ICS 35.240.50 J07 National Standards of People's Republic of China Code for the application of radio frequency identification technology for equipment inspection and maintenance 2016-08-29 released 2017-03-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China China National Standardization Management Committee released Directory Preface III 1 Scope 1 2 normative reference document 1 3 Terms and definitions 1 4 inspection maintenance history electronic label management requirements 2 4.1 Check the maintenance history electronic label initialization 2 4.2 Inspection and maintenance history Electronic label installation 2 4.3 information record link 2 4.4 inspection repair history electronic label removal 2 4.5 information record content 2 4.6 Information recording mode 3 4.7 Inspection and maintenance history Electronic tag storage allocation 3 5 inspection maintenance history electronic tag application requirements 3 5.1 Operating frequency 3 5.2 Inspection and maintenance history Electronic tag performance 3 5.3 Inspection and maintenance history Electronic label packaging fixed and installation requirements 3 6 reader application requirements 4 6.1 reader application link 4 6.2 reader environment adaptability requirements 4 6.3 RFID fixed reader 4 6.4 RFID Handheld Reader 4 6.5 wireless transmission capacity 4 6.6 Offline work ability 5 ForewordThis standard is drafted in accordance with the rules given in GB/T 1.1-2009. Please note that some of the contents of this document may involve patents. The issuer of this document does not assume responsibility for the identification of these patents. This standard is proposed by the China Machinery Industry Federation. This standard is nationalized by the National Automation System and Integrated Standardization Technical Committee (SAC/TC159). The drafting of this standard. Institute of Automation, Chinese Academy of Sciences, Beijing Institute of Mechanical Industry Automation, Qiqihar rail transportation equipment Limited liability company, Beijing Branch Kai letter Software Technology Co., Ltd., Weihai Beiyang Electric Group Co., Ltd., Beijing Fiberhome LianTuo Technology Limited company. The main drafters of this standard. Tan Jie, Li Xiaodong, Wang Minli, Wang Haidan, Zhao Hongsheng, Yu Xiaochun, Wang Qiang, Li Min, Zhang Gejun, Fan Junhong, Liu Chengyong, Song Weining, Wang Gang, Ma Zengliang. Code for the application of radio frequency identification technology for equipment inspection and maintenance1 ScopeThis standard specifies the large-scale railway trucks, mining and open-pit mining equipment, large-scale environmental protection equipment, large-scale complete sets of equipment, agricultural machinery and other large Complete sets of equipment and key metal parts of the inspection process of basic management requirements, as well as large-capacity tag data read under the inspection resume General technical requirements for sub - tags and readers. This standard applies to the above sets of equipment and key metal parts inspection and maintenance process of radio frequency identification system application of the general management requirements, Design and Application of Electronic Tag and Reading and Writing Equipment.2 normative reference documentsThe following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document. GB/T 32830.1-2016 Equipment manufacturing manufacturing process Radio frequency identification Part 1. Electronic tag technical requirements and applications specification GB/T 32830.2-2016 Equipment manufacturing manufacturing process Radio frequency identification Part 2. Interrogator technical requirements and application specifications3 terms and definitionsGB/T 32830.1, GB/T 32830.2 Definitions and the following terms and definitions apply to this document. 3.1 Inspection maintenance process maintenanceandrepairprocess Equipment in the use of the process of inspection, maintenance, repair, scrapping and other processes. Note. Inspection repair repair settings can be divided into planned maintenance and temporary maintenance, including planned maintenance, including overhaul, repair and minor repair, so as to restore the repair department Points of precision and performance. 3.2 Overhaul overhaul Disassembly, inspection, repair and replacement of all or most of the parts on a regular basis within the prescribed time limit. Note. Overhaul should be checked before the inspection records, that is, damage and maintenance status. 3.3 Repair in repair According to the actual situation of the equipment, the deterioration of the state has been difficult to achieve the requirements of the production process parts for targeted maintenance. Note. In the repair, the general part of the demolition, inspection, replacement or repair failure of the parts, if necessary, the parts of the local maintenance and adjustment accuracy. 3.4 Minor minorrepair According to the law of wear and tear, on the part of the serious wear and tear parts of the demolition and inspection. 3.5 Temporary repair temporaryrepair Check and repair the equipment for temporary faults. Note. Temporary repair and non-critical components of key components. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 32829-2016_English be delivered?Answer: Upon your order, we will start to translate GB/T 32829-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 32829-2016_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 32829-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
