GB/T 31934-2015 English PDF

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 31934-2015	140	Add to Cart	Auto, < 3 mins	Measuring and calculation method for heat storage capacity of high radiative coating	Valid

Similar standards

GB/T 36023   GB/T 36025   GB/T 33785   GB/T 45647   GB/T 45436   

Basic data

Standard ID: GB/T 31934-2015 (GB/T31934-2015)
Description (Translated English): Measuring and calculation method for heat storage capacity of high radiative coating
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: H04
Classification of International Standard: 77.010
Word Count Estimation: 8,84
Date of Issue: 2015-09-11
Date of Implementation: 2016-06-01
Quoted Standard: GB/T 7321; GB/T 8170
Regulation (derived from): National Standard Announcement 2015 No.25
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This Standard specifies the terms and definitions and calculation methods measured high radiation coating of heat storage, test methods, materials, equipment, sample preparation, measurement and calculation of heat storage, allowing the poor and the measurement report. This Standard applies to all kinds of high radiation firing refractory matrix coating regenerator.

GB/T 31934-2015: Measuring and calculation method for heat storage capacity of high radiative coating

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Determination and calculation of high radiation coating of heat storage) ICS 77.010 H04 National Standards of People's Republic of China Determination and calculation of high radiation coating of heat storage Issued on. 2015-09-11 2016-06-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. The standard proposed by China Iron and Steel Association. This standard by the National Steel Standardization Technical Committee (SAC/TC183) centralized. This standard was drafted. Shandong Huimin Technology Development Co., Ltd., Metallurgical Industry Information Standards Institute, Shougang, Angang has Limited. The main drafters of this standard. Zhou Huimin, Zhangshao Jiang, Wang Jiang, Chenguan Jun, Chou Jinhui, Xu Dayong Liu Yi Zhou, Liang, Liu Changfu, Wang Lianjie, Liu Changpeng. Determination and calculation of high radiation coating of heat storage

1 Scope

This standard specifies the terms and definitions of determination and calculation method of high radiation coating of heat storage, test methods, materials, equipment, sample Preparation, determination and calculation of heat storage, allowing the poor and the measurement report. This standard applies to all kinds of high radiation firing refractory matrix coating regenerator.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 7321 sample preparation method shaped refractory products GB/T 8170 repair value expressed about the rules and limit values \u200b\u200band judgment

3 Terms and Definitions

The following terms and definitions apply to this document. 3.1 High radiation coating highradiativecoating Regenerator in high emissivity surface layer of the coating material to the substrate emissivity. 3.2 High radiation coating regenerator regeneratorwithhighradiativecoating Coated high radiation coating can improve the regenerator heat exchange rates. 3.3 Heat storage heatstoragecapacity At a predetermined time and temperature conditions set by the regenerator heat absorbed in joules (J). 3.4 Pretreatment liquid pretreatmentsolution Corresponding to the high radiation coating material in the high temperature binder and water in certain proportion of the solution. Test Method 4 The same batch of coated high radiation coating and high radiation coating uncoated two of the same material, the same shape, the same size regenerator sample Heating under the same conditions, reuse calorimeter measurement and calculation of heat accumulation two samples.

5 material

Regenerator, high radiation coating material and the pretreatment liquid. ......

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 31934-2015_English be delivered?

Answer: Upon your order, we will start to translate GB/T 31934-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically in 9 seconds (download/delivered in 9 seconds). The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 31934-2015_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 31934-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.