Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

GB/T 36025-2018 PDF English

US$150.00 · In stock · Download in 9 seconds
GB/T 36025-2018: Guides for energy efficiency assessment of continuous galvanizing process
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid
Standard IDUSDBUY PDFDeliveryStandard Title (Description)Status
GB/T 36025-2018150 Add to Cart Auto, 9 seconds. Guides for energy efficiency assessment of continuous galvanizing process Valid

Similar standards

GB/T 37390   GB/T 37429   GB/T 36023   GB/T 45436   

GB/T 36025-2018: Guides for energy efficiency assessment of continuous galvanizing process

---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT36025-2018
GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 77.010 H 04 Guides for energy efficiency assessment of continuous galvanizing process Issued on: MARCH 15, 2018 Implemented on: DECEMBER 1, 2018 Issued by. General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China; Standardization Administration of the People’s Republic of China.

Table of Contents

Foreword ... 3 1 Scope ... 4 2 Normative references ... 4 3 Terms and definitions ... 4 4 Assessment procedures ... 5 5 Boundary and scope of energy consumption statistics ... 5 6 Benchmark energy consumption ... 6 7 Actual energy consumption ... 9 8 Energy efficiency index ... 11 9 Energy efficiency analysis ... 11 10 Energy efficiency optimization measures ... 12 Annex A (Informative) Boundary division for continuous galvanizing process 14 Annex B (Informative) Recommended values of standard coal conversion coefficient for various energy and energy-consuming working media ... 15 References ... 17 Guides for energy efficiency assessment of continuous galvanizing process

1 Scope

This Standard specifies the terms and definitions, assessment procedures, boundary and scope of energy consumption statistics, benchmark energy consumption, actual energy consumption, energy efficiency index, energy efficiency analysis and energy efficiency optimization measures for the energy efficiency assessment of continuous galvanizing process. This Standard is applicable to the energy efficiency assessment and energy- saving potential analysis of continuous galvanizing process of an iron and steel enterprise.

2 Normative references

The following documents are essential to the application of this document. For dated references, only the editions with the dates indicated are applicable to this document. For undated references, only the latest editions (including all the amendments) are applicable to this document. GB 17167 General principle for equipping and managing of the measuring instrument of energy in organization of energy using GB/T 21368 Specification for equipping and managing of measuring instrument of energy in the iron and steel industry GB/T 23331 Energy management systems -- Requirements GB/T 28924 Guides for calculating energy efficiency index of an iron and steel enterprise YB/T 4211 Determination and calculation of heat balance of furnace for CGL YB/T 4662 Guides for energy efficiency assessment of an iron and steel enterprise

3 Terms and definitions

The terms and definitions defined by GB/T 23331, GB/T 28924, and YB/T 4662

7 Actual energy consumption

7.1 Data acquisition 7.1.1 The field data acquisition includes but is not limited to the following. The process parameters shall be taken under stable production conditions. The variation shall be averaged over the statistical period. a) production information, including the production scale, quantity of conforming products during the statistical period, etc.; b) raw material conditions, including the types of raw material plates, etc.; c) product conditions, including the specifications, steel type, plating type, post-processing type, etc.; d) consumption of energy and energy-consuming working media, such as consumption of gas, natural gas, electricity (the annealing furnace is heated separately from the others), circulating water, compressed air, nitrogen, hydrogen, steam, liquid ammonia, etc.; e) energy recovery, such as steam recovery, recovered steam pressure, temperature, etc.; f) ambient temperature. 7.1.2 The field data acquisition shall be carried out in accordance with YB/T 4211. 7.2 Principle for standard coal conversion coefficient of energy and energy-consuming working media 7.2.1 The actual fuel energy consumed by the energy-using unit shall be converted into the amount of standard coal based on its net calorific value. For unmeasured ones, SEE Table B.1. 7.2.2 Steam shall be converted into the amount of standard coal based on its enthalpy value. SEE Table B.2. 7.2.3 The standard coal used for the conversion of energy-consuming working media is shown in Table B.3. 7.2.4 The conversion relationship between standard coal and heat is 1 kgce = 29 307.6 kJ. 7.2.5 The equivalent value of the electric standard coal conversion coefficient shall be taken, that is, 1 kW·h = 0.122 9 kgce. 7.3 Actual energy consumption calculation The actual energy consumption is calculated according to the Formula (3). a) whether it complies with relevant national laws, regulations, policies, and mandatory standards; b) whether there is any backward technology or equipment that is forbidden or obsolete; c) the use of new energy-saving processes, new technologies, and new products recommended by the state and industry. 9.2 Outfit and monitoring analysis of energy measuring equipment The outfit and monitoring analysis of energy measuring equipment shall include but shall not be limited to the following. a) According to the requirements of GB 17167 and GB/T 21368, ANALYZE whether the outfit scheme of the energy measuring equipment for continuous galvanizing process is scientific and reasonable; b) The state of energy utilization in the continuous galvanizing process can be monitored in accordance with GB/T 15316. 9.3 Analysis of energy efficiency level The analysis of energy efficiency level shall include but shall not be limited to the following. a) Energy efficiency analysis of continuous galvanizing process; b) The energy efficiency analysis of the heating furnace for continuous galvanizing process can be in accordance with GB/T 29728; c) The energy efficiency analysis of important equipment can be in accordance with GB 18613, GB 30254, GB 19761, and GB 19762; d) The energy control analysis can be in accordance with GB/T 30258; e) The analysis on the rationality of electric energy utilization can be in accordance with GB/T 3485; f) The analysis on the rationality of thermal energy utilization can be in accordance with GB/T 3486; g) The energy-saving potential analysis and energy system optimization can be in accordance with GB/T 30715.

10 Energy efficiency optimization measures

The continuous galvanizing process can use but is not limited to the following energy efficiency optimization measures. a) IMPROVE the energy control level; b) Efficient heat exchange technology of combustion air for the annealing furnace; c) Energy-saving and environment-friendly combustion technology of the annealing furnace; References [1] GB/T 3485 Technical guides for evaluating the rationality of electricity usage in industrial enterprise [2] GB/T 3486 Technical guides for evaluating the rationality of heat usage in industrial enterprise [3] GB/T 15316 General principles for monitoring and testing of energy saving [4] GB 18613 Minimum allowable values of energy efficiency and energy efficiency grades for small and medium three-phase asynchronous motors [5] GB 19761 Minimum allowable values of energy efficiency and energy efficiency grades for fan [6] GB 19762 The minimum allowable values of energy efficiency and evaluating values of energy conservation of centrifugal pump for fresh water [7] GB/T 29728 Energy consumption grades of furnace for CGL [8] GB 30254 Minimum allowable values of energy efficiency and the energy efficiency grades for cage three-phase high voltage induction motor [9] GB/T 30258 Implementation guidance for energy management systems in iron and steel industry [10] GB/T 30715 Guideline for energy system optimization of iron and steel production process ......

Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Image 1     Image 2     Image 3     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of English version of GB/T 36025-2018 be delivered?Answer: The full copy PDF of English version of GB/T 36025-2018 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.

Question 2: Can I share the purchased PDF of GB/T 36025-2018_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 36025-2018_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 36025-2018 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.

How to buy and download a true PDF of English version of GB/T 36025-2018?

A step-by-step guide to download PDF of GB/T 36025-2018_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 36025-2018".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3    Steps 4~6    Step 7    Step 8    Step 9