GB/T 30308-2013 English PDFUS$349.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 30308-2013: Fluoroelastomer -- General specification and procedure of evaluation Status: Valid
Basic dataStandard ID: GB/T 30308-2013 (GB/T30308-2013)Description (Translated English): Fluoroelastomer -- General specification and procedure of evaluation Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: G35 Classification of International Standard: 83.060 Word Count Estimation: 15,160 Quoted Standard: GB/T 528-2009; GB/T 531.1; GB/T 533-2008; GB/T 1232.1; GB/T 1690-2010; GB/T 3512; GB 3778-2011; GB/T 5576; GB/T 5577; GB/T 6038-2006; GB/T 7759-1996; GB/T 19187; HG/T 3928-2007 Regulation (derived from): National Standards Bulletin 2013 No. 27 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the classification and fluorine rubber grades, technical requirements and evaluation methods, and signs, packaging, transport and storage. This standard applies to emulsion prepared by fluorine rubber. GB/T 30308-2013: Fluoroelastomer -- General specification and procedure of evaluation---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Fluoroelastomers. General specification and procedure of evaluation ICS 83.060 G35 National Standards of People's Republic of China Viton general specification and evaluation methods Issued on. 2013-12-31 2014-09-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. The standard proposed by China Petroleum and Chemical Industry Association. This standard by the National Rubber and rubber products Standardization Technical Committee (SAC/TC35) centralized. This standard is drafted by. Shanghai 3F New Materials Co., Zhonghao Chenguang Chemical Research Institute Limited. The main drafters. Zhang Bin, Shen Qing, Tang Ying, Hou Yan. Viton general specification and evaluation methods1 ScopeThis standard specifies the classification and fluorine rubber grades, technical requirements and evaluation methods, and signs, packaging, transportation and storage. This standard applies to prepared by the polymerization of fluorine rubber.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 528-2009 Determination of vulcanized rubber or thermoplastic rubber tensile stress-strain properties GB/T 531.1 vulcanized rubber or thermoplastic rubber hardness test pushed Part 1. Shore hardness method (Shore hardness) Determination of GB/T 533-2008 vulcanized rubber or thermoplastic rubber Density GB/T 1232.1 unvulcanized rubber shearing disc viscometer - Part 1 Determination. Determination of Mooney viscosity GB/T 1690-2010 vulcanized rubber or thermoplastic rubber Test method for resistance to liquids GB/T 3512 vulcanized rubber or thermoplastic rubber hot air and heat accelerated aging test GB 3778-2011 carbon black for rubber GB/T 5576, and latex rubber nomenclature GB/T 5577 synthetic rubber grade specifications GB/T 6038-2006 Rubber test feed ingredients, mixing and vulcanization - Equipment and procedures GB/T 7759-1996 vulcanized rubber, thermoplastic rubber at room temperature, high and low temperature compression set determination GB/T 19187 Rubber, raw synthetic sampling program HG/T 3928-2007 industrial activity light magnesium oxide3 Categories and grades3.1 Classification According to GB/T 5576 regulations, Viton divided into three categories, namely, FKM, FEPM, FFKM. Wherein. FKM --- represents a fluorine containing polymer chain, perfluoroalkyl or perfluoroalkoxy groups substituted with fluorine rubber; FEPM --- represents tetrafluoroethylene copolymer of ethylene and propylene; --- Represents a polymer chain FFKM have all substituents, fluoro, perfluoroalkyl or perfluoroalkoxy perfluoro rubber. Grade 3.2 Rule 3.2.1 According to GB/T 5577 regulations, fluorine rubber grades from the group consisting of two characters. a) The first character of a given group of fluorine rubber varieties code information; b) The second group of characters given Viton feature information by four Arabic numerals. among them. ...... |
