GB/T 30264.2-2013 English PDF

US$459.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 30264.2-2013: Software engineering -- Automated testing capability -- Part 2: Personal capability maturity model
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 30264.2-2013	459	Add to Cart	4 days	Software engineering -- Automated testing capability -- Part 2: Personal capability maturity model	Valid

Similar standards

GB/T 39099   GB/T 25000.51   GB/T 28172   GB/T 45281   GB/T 45395   GB/T 45400   

Basic data

Standard ID: GB/T 30264.2-2013 (GB/T30264.2-2013)
Description (Translated English): Software engineering -- Automated testing capability -- Part 2: Personal capability maturity model
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: L77
Classification of International Standard: 35.080
Word Count Estimation: 20,221
Quoted Standard: GB/T 11457
Regulation (derived from): National Standards Bulletin 2013 No. 27
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the level of the model used to measure the ability of automated testing practitioners. This standard applies to the ability to evaluate automated testing of employees.

GB/T 30264.2-2013: Software engineering -- Automated testing capability -- Part 2: Personal capability maturity model

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Software engineering Automated testing capability Part 2. Personal capability maturity model ICS 35.080 L77 National Standards of People's Republic of China Automated testing software engineering capacity Part 2. practitioners ability level model Part 2. Personalcapabilitymaturitymodel Issued on. 2013-12-31 2014-07-15 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Introduction Ⅲ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 Automated Test Capability Model 1 4.1 Model Structure 1 4.2 Model 2 Content 5 employees automated testing capability 3 5.1 Contract Management 3 5.2 automated test plan design 4 5.3 automated test execution 6 5.4 automated test analysis and review 7 5.5 test results back 9 5.6 automated test process control 9 6 automated test capability level 10 6.1 execution stage 10 6.2 Demand level 11 6.3 Design of stage 12 6.4 Analysis of stage 12 6.5 Management level 13 Appendix A (informative) List of work products 14 References 16

Foreword

GB/T 30264 "automated testing software engineering capacity" is divided into the following sections. --- Part 1. Test institutional capacity level model; --- Part 2. Employees capability level model. This section GB/T Part of 230,264. This section drafted in accordance with GB/T 1.1-2009 given rules. This part of the National Information Technology Standardization Technical Committee (SAC/TC28) and focal points. This section is drafted. Beijing University of Posts and Telecommunications, China Electronics Standardization Institute, Nanning square Software Technology Co., Ltd. Company Division of Beijing Branch High-tech Co., Ltd. Cheng-yu, Chinese Academy of Sciences Institute of Automation. The main drafters of this section. Yuan Yuyu, Hu Yu, Li Yinghua, GUO Xin-wei, Zhang Yang Yang, Wu Yujun, Huang Jiayu, Yang Tsui, high-Yi, Han Qiang, Shi Guiji. Automated testing software engineering capacity Part 2. practitioners ability level model

1 Scope

This section GB/T 30264 is defined in the model used to measure the level of employees automated testing capabilities. This section applies to the ability to evaluate the automated testing of employees.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 11457 IT software engineering terminology

3 Terms and Definitions

Terms and definitions GB/T 11457 apply as defined in this document.

4 Automated Test Capability Model

4.1 Model Structure Structure employing automated testing ability of the model shown in Figure 1. Employing automated testing capability model over a plurality of test automation Cheng composition within each process is divided into a plurality of Practice. Employees grade automated testing ability of the model is divided into five, namely, the implementation level, demand level, level design, analysis and management levels. Executive-level personnel should have the ability to perform automated testing, automated testing to ensure the normal automated test execution get on. Demand level should have automated testing requirements analysis and planning capabilities to ensure the realization of the contract in the contract management process Automation needs analysis and project evaluation, planning and realization of automated test planning and design process automation. Design level staff Should have the ability to design automated testing, automated testing to ensure that the process of planning and design for test design automation. Analytical grade The staff should have the ability to analyze and feedback automated testing, automated testing to ensure that the analysis and evaluation process for test and analysis Review automation, and automated testing to ensure that the feedback process feedback for test automation. Management-level personnel should have automation Process management capability testing, test automation can manage the automation project in the testing process to ensure the smooth implementation of automated testing. Practitioners automated testing capability level evaluation model is based on the level of practice evaluation and formation. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 30264.2-2013_English be delivered?

Answer: Upon your order, we will start to translate GB/T 30264.2-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 30264.2-2013_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 30264.2-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.