GB/T 25000.51-2016 PDF EnglishUS$145.00 · In stock · Download in 9 seconds
GB/T 25000.51-2016: Systems and software engineering -- Systems and software Quality Requirements and Evaluation (SQuaRE) -- Part 51: Requirements for quality of Ready to Use Software Product (RUSP) and instructions for testing Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid GB/T 25000.51: Historical versions
Similar standardsGB/T 25000.51-2016: Systems and software engineering -- Systems and software Quality Requirements and Evaluation (SQuaRE) -- Part 51: Requirements for quality of Ready to Use Software Product (RUSP) and instructions for testing---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT25000.51-2016 GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 35.080 L 77 Replacing GB/T 25000.51-2010 Systems and software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Part 51. Requirements for quality of Ready to Use Software Product (RUSP) and instructions for testing (ISO/IEC 25051.2014, Software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Requirements for quality of Ready to Use Software Product (RUSP) and instructions for testing, MOD) Issued on. OCTOBER 13, 2016 Implemented on. MAY 01, 2017 Issued by. General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China; Standardization Administration of the People’s Republic of China. Table of ContentsForeword... 3 Introduction... 6 1 Scope... 7 2 Conformance... 8 3 Normative references... 9 4 Terms, definitions and abbreviated terms... 9 4.1 Terms and definitions... 9 4.2 Abbreviated terms... 14 5 Requirements for RUSP... 15 5.1 Requirements for product description... 15 5.2 Requirements for user documentation... 21 5.3 Quality requirements for software... 25 6 Requirements for test documentation... 30 6.1 General requirements... 30 6.2 Requirements for the test plan... 33 6.3 Requirements for the testing description... 34 6.4 Requirements for the test results... 35 7 Instructions for conformity evaluation... 37 7.1 General principles... 37 7.2 Conformity evaluation pre-requisites... 37 7.3 Conformity evaluation activities... 37 7.4 Conformity evaluation process... 38 7.5 Conformity evaluation report... 39 7.6 Follow up conformity evaluation... 40 Annex A (informative) Guidance for RUSP evaluation in business or safety critical applications... 41 Annex B (informative) How to use this Part... 45 Bibliography... 46ForewordGB/T 25000 “Systems and software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE)” consists of the following parts. - Part 1.Guide to SQuaRE; - Part 2.Planning and management; - Part 10.System and software quality models; - Part 12.Data quality model; - Part 20.Measurement reference models and guides; - Part 21.Quality measure elements; - Part 22.Measurement of quality in use; - Part 23.System and software product quality measurement; - Part 24.Measurement of data quality; - Part 30.Quality requirements; - Part 40.Evaluation process; - Part 41.Evaluation guide to developers, acquirers and independent evaluators; - Part 42.Evaluation module; - Part 45.Resiliency evaluation module; - Part 51.Requirements for quality of Ready to Use Software Product (RUSP) and instructions for testing; - Part 60.Common industry format (CIF) for usability test reports. Common Framework for Ease of Use Related Information; - Part 62.Common industry format (CIF) for usability test reports; - Part 63.Common industry format (CIF) for usability. use context description; - Part 64.Common industry format (CIF) for usability. user requirement report; - Part 65.Common industry format (CIF) for usability. user requirement specification description; - Part 66.Common industry format (CIF) for usability. evaluation report. This Part is Part 51 of GB/T 25000. This Part is drafted in accordance with the rules given GB/T 1.1-2009. This Part replaces GB/T 25000.51-2010 “Software engineering - Software product Quality Requirements and Evaluation (SQuaRE) - Requirements for quality of Commercial Off-The-Self (COTS) software product and instructions for testing”. Compared with GB/T 25000.51-2010, the main technical changes are as follows. a) GB/T 25000.51-2010 is identical to ISO/IEC 25051.2006, and this Part modifies ISO/IEC 25051.2014. b) ADJUST and SUPPLEMENT the terms and definitions. c) In this Part, ADD the description of relevant product quality characteristics of “security” and “compatibility”, ADJUST the quality characteristics to five major characteristics, i.e. “effectiveness”, “efficiency”, “satisfaction“, ”freedom from risk” and “context coverage”, and MODIFY, ADJUST and SUPPLEMENT the relevant sub-characteristics (for more details, see 5.1.2.1, 5.1.4, 5.1.6.2, 5.1.6.3, 5.1.8.4, 5.1.10, 5.1.15, 5.1.16, 5.1.17, 5.2.13.1, 5.2.15.1, 5.2.16.1, 5.2.17, 5.2.18.1, 5.2.19.1, 5.3.3, 5.3.4.1, 5.3.5.5, 5.3.6.1, 5.3.7.1, 5.3.9, 5.3.10, 5.3.11, 5.3.12, 5.3.13, 6.2.4, 6.2.5, 6.2.6, 6.2.7). d) ADJUST the annex. This Part uses redrafting method to modify and adopt ISO/IEC 25051.2014 “Software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Requirements for quality of Ready to Use Software Product (RUSP) and instructions for testing” (English version). The main technical differences between this Part and ISO/IEC 25051.2014 and their causes are as follows. a) In normative references, delete ISO/IEC 25000 that is normatively referenced in the original international standard, because it is not mentioned in the text; replace ISO/IEC 25010 by the national standard GB/T 25000.10-2016 that is referenced with date, because the quality model must be referenced with date. b) Since GB/T 25000.10-2016 modifies and adopts ISO/IEC 25010.2011, the description of the relevant characteristics of 5.1, 5.2 and 5.3 are modified accordingly, mainly for compliance issues. c) 5.1.4.1 in the International Standard is corrected from “All functions mentioned in the product description shall be classified according to the quality requirements for software characteristics (5.3.2 to 5.3.9)” as “All functions mentioned in the product description should be classified according to the description of software product quality characteristics (5.1.5 to 5.1.12)” [Translator note. there is no 5.1.4.1 in this standard; 5.1.4 is existed in this standard]. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. The drafting authority of this document shall not be held responsible for identifying any or all such patent rights. This Part was proposed and shall be under the jurisdiction of China National Information Technology Standardization (SAC/TC 28). Drafting organizations of this Part. China Electronics Standardization Institute, Shanghai Computer Software Technology Development Center, National Application Software Product Quality Supervision and Inspection Center, Guangdong Science & Technology Infrastructure, Shenzhen Zhong An Testing Standard Technology Co., Ltd., Foshan Comwin Light & Electricity Co., Ltd., Chongqing Software Testing Center Co., Ltd., Nanjing University, Zhuhai Southern Software Network Evaluation and Testing Center, Hubei Software Evaluation and Testing Center, China Aerospace Science and Technology Corporation Software Evaluation and Testing Center, Inner Mongolia Electronic Product Quality Inspection Institute, Nanchang Jinlu Software Park Software Evaluation and Testing Training Co., Ltd., Shanghai ZeZhong Software Co., Ltd., Shanghai Park Information Technology Co., Ltd., Shanghai Software Industry Association. Drafters of this Part. Zhang Yangyang, Feng Hui, Cai Lizhi, Hu Yun, Wang Wei, Ding Xiaoming, Song Hongbo, Luo Liang, Pan Yucong, He Zhiming, Liao Hui, Zhang Yi, Xue Baoping, Xu Baowen, Hou Jianhua, Wang Rui, Yang Guizhi, Xia Qiming, Huang Zhaosen, Liu Xiaojian, Li Xiaochun, Ding Weiqing, Gao Hailan, Gong Shaofei, Zhang Xueli, Chen Hai, Li Yinghua. The historical editions of the standard replaced by this Part are as follows. - GB/T 17544-1998; - GB/T 25000.51-2010.1 ScopeThis Part of GB/T 25000 establishes.2 ConformanceRUSP conforms to this Part if.3 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.4 Terms, definitions and abbreviated termsAny condition that deviates from expectations based on requirements specifications, design documents, standards, etc. or from someone’s perceptions or experiences. Systematic examination of the extent to which a product, process or service fulfils specified requirements.5 Requirements for RUSPThe product description shall contain, as applicable, statements on security, taking into account confidentiality, Integrity, non-repudiation, accountability and authenticity, written such that verifiable evidence of compliance can be demonstrated, based on GB/T 25000.10-2016.6 Requirements for test documentationThe test plan shall specify the communication model and methods used to share the test documentation and the test items to the stakeholders. The assessment of the execution report and anomaly report shall demonstrate that all expected behaviours were obtained, within the limits of the criteria used to decide if the test results show the conformity of the software.7 Instructions for conformity evaluationA conformity evaluation is carried out to determine the conformity of the software to the requirements in subclause 5.3 by producing test documentation conforming to the requirements in Clause 6, but without the part related to anomalies corrections and to verification by re-testing (subclauses 6.4.2.3 to 6.4.2.6). ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 25000.51-2016 be delivered?Answer: The full copy PDF of English version of GB/T 25000.51-2016 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 25000.51-2016_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 25000.51-2016_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 25000.51-2016 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version GB/T 25000.51-2016?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 25000.51-2016 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of GB/T 25000.51-2016?A step-by-step guide to download PDF of GB/T 25000.51-2016_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 25000.51-2016". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
