GB/T 26443-2010 English PDF

US$559.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 26443-2010: Safety colours and safety signs -- Classification, performance and durability of safety signs
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 26443-2010	559	Add to Cart	5 days	Safety colours and safety signs -- Classification, performance and durability of safety signs	Valid

Similar standards

GB/T 16903   GB/T 15566.1   GB/T 31525   GB/T 30237   GB/T 30785   GB 15093   

Basic data

Standard ID: GB/T 26443-2010 (GB/T26443-2010)
Description (Translated English): Safety colours and safety signs -- Classification, performance and durability of safety signs
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: A22
Classification of International Standard: 01.080.01
Word Count Estimation: 24,226
Date of Issue: 2011-01-14
Date of Implementation: 2011-08-01
Quoted Standard: GB/T 2406.2; GB/T 2423.55; GB/T 2893.1; GB/T 2918; GB/T 3920; GB/T 5169.10; GB/T 5169.11; GB/T 6994; GB/T 9286; GB/T 9754; GB/T 10125; GB/T 15565.1; GB/T 15565.2; GB/T 16422.2; GB/T 16422.4; GB/T 23809; ISO 554; ISO 4046-4-2002; ISO 7784-3; CIE 15.2; CIE 69
Adopted Standard: ISO 17398-2004, MOD
Regulation (derived from): National Standard Approval Announcement 2011 No.192
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the requirements related to safety signs performance classification system. According safety signs intended use of the environment, photometric properties, , illumination, substrate mounting surface characteristics such as performance and safety signs were graded. Relevant performance indicators and test methods specified in this standard is to deliver products to buyers when an accurate description of the performance -related durability and life expectancy. This standard does not apply to the power supply for safety signs, performance power components and electrical components. This standard does not apply to the performance of the lighting components, but the photometric properties of a particular class of safety signs were specified.

GB/T 26443-2010: Safety colours and safety signs -- Classification, performance and durability of safety signs

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Safety colours and safety signs. Classification, performance and durability of safety signs ICS 01.080.01 A22 National Standards of People's Republic of China Safety colors and safety signs Classification of safety signs, performance and durability Classification, performanceanddurabilityofsafetysigns (ISO 17398.2004, MOD) Issued on. 2011-01-14 2011-08-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Introduction Ⅲ Introduction Ⅳ 1 Scope 1 2 Normative references 1 3 Terms and definitions 2 Detailed requirements for Category 4 safety signs and product descriptions 2 4.1 Category 2 safety signs 4.2 Product Description 3 5 5 Performance Requirements 5.1 General requirements for safety signs 5 5.2 within 5 luminous safety signs Weatherability outdoor safety signs 6 5.3 Salt spray corrosion resistance metal outdoor safety signs 5.4 6 5.5 phosphorescent safety signs 6 5.6 retroreflective safety signs 6 5.7 with a pressure-sensitive adhesive fixing strength of the safety signs 6 Optional performance requirements for safety signs 6 7 6.1 General requirements 7 6.2 shrinkage resistance 7 6.3 chemical resistance to corrosion 7 6.4 Impact resistance 7 6.5 wear 7 6.6 Water resistance 7 Weatherability 6.7 external light source or sources inside and outside the safety signs 8 7 Test methods 8 7.1 Sample and Control Sample 8 7.2 moist heat resistance test 8 7.3 8 weathering test 7.4 Resistance to salt spray corrosion test 10 10 7.5 Impact resistance test 7.6 Water resistance test 11 7.7 combustion resistance test 11 7.8 surface adhesion test 11 7.9 11 abrasion test 7.10 stiffness test 12 7.11 phosphorescent safety signs suitable brightness measurements 12 7.12 pressure sensitive adhesive property test installation of safety signs 14 7.13 weatherability 15 7.14 shrunk 16 7.15 chemical resistance to corrosion 16 7.16 abrasion resistance 16 8 marked and labeled 16 8.1 mark 16 8.2 identifies 17 9 documents and test reports 17 9.1 File 17 9.2 Test Report 17 Appendix A (informative) impact resistance test tool 18 Figure 1 example of the impact of the position 11 Figure A.1 spring hammer test apparatus 18 Table 1 Category 3 safety signs Table 2 luma blanking performance phosphorescent safety signs 6 Table 3 peel strength and shear strength of Category 7 Open Table 4 carbon arc lamp type accelerated weathering test conditions 9 Table 5 condensation type accelerated weathering test conditions 9 Table 6 Xenon arc lamp artificial weathering test conditions for a 10 Table 7 Xenon arc lamp artificial weathering test conditions = 10 Table 8 15 weather conditions 16 Table 9 Reagents

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard uses redrafted Law Amendment uses ISO 17398.2004 "Safety colors and safety signs safety signs classification, performance and Durability. " This standard and ISO 17398.2004 as compared to structural changes as follows. on the ISO 17398.2004 term entry sequence was Adjustment. This standard and ISO 17398.2004 technical differences and their reasons are. In order to meet the technical conditions of the ISO 17398. 2004 Normative references file instead of using the correspondence between consistency, in Chapter 2, "Normative references" listed in the document Inventory identified by the degree of consistency instead of reflecting the corresponding situation. In addition, since GB/T 15565 "graphic symbol term" (all Section) covers the ISO 17724.2003 terminology used in this standard, GB/T 15565 replaced by ISO 17724.2003. This standard and ISO 17398.2004 compared to made editorial changes. Adjust the Table 3, Table 4, Table 5, Table 6, Table 7 and other table format. The standard graphic symbol by the National Standardization Technical Committee (SAC/TC59) and focal points. This standard drafting units. China National Institute of Standardization, Ministry of Civil Affairs Institute of Geographical Names, Ministry of Public Security in Tianjin Fire Research Institute, China's civil aviation total Office of Aviation Safety Technology Center. The main drafters of this standard. Zouzhuan Yu, a white house, Di plains, easing Yao, Chen rights, Zhang Liang, Liu Jiawei.

Introduction

This standard is intended to provide consultation and performance parameters to determine the safety signs safety sign manufacturers (suppliers) and buyers Number basis. Life expectancy in the safety signs, various performance parameters agreed required constant. This standard manufacturers (suppliers) need for product classification, and provide detailed product descriptions. Manufacturers (suppliers) and buyers Suppliers may define requirements for products in terms of the level of performance or intended use of the environment. Promotion and implementation of the standards will help better implementation of the requirements of the body, and a deeper understanding of the everyday use of various security Performance logo. Safety colors and safety signs Classification of safety signs, performance and durability

1 Scope

This standard specifies the requirements of safety signs classification system performance, use of the environment, the substrate, the optical properties depending on the intended safety signs, Illumination, installation and surface characteristics on the performance of safety signs were graded. Relevant performance indicators and tests specified in this standard The method for delivery of products to buyers accurately described the performance associated with the durability and life expectancy. This standard does not apply to the performance of the power supply for safety signs, power components and electrical components. This standard does not apply to lighting components Can, but the photometric properties of a particular category of safety signs were prescribed.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 2406.2 Determination of burning behavior of plastics - Part 2 oxygen index. room temperature test (GB/T 2406.2-2009, ISO 4589-2.1996, IDT) GB/T 2423.55 Environmental testing for electric and electronic products Part 2. Environmental Test Test Eh. Hammer tests (GB/T 2423.55- 2006, IEC 60068-2-75.1997, IDT) GB/T 2893.1 Graphical symbols - Safety colors and safety signs - Part 1. workplaces and public areas for safety signs set Accounting principles (GB/T 2893.1-2004, ISO 3864-1.2002, MOD) GB/T 2918 standard plastic sample conditioning and environmental tests (GB/T 2918-1998, idt ISO 291.1997) GB/T 3920 Textiles Tests for color fastness rubbing fastness (GB/T 3920-2008, ISO 105-X12.2001, MOD) GB/T 5169.10 Fire hazard testing for electric and electronic products - Part 10. Glowing/hot wire based test methods - Glow wire mounted Set Common test methods (GB/T 5169.10-2006, IEC 60695-2-10.2000, IDT) GB/T 5169.11 Fire hazard testing for electric and electronic products - Part 11. Glowing/hot wire based test methods for finished burning Hot wire flammability test method (GB/T 5169.11-2006, IEC 60695-2-11.2000, IDT) GB/T 6994 Ship electrical equipment definitions and general provisions (GB/T 6994-2006, IEC 60092-101.2002, IDT) GB/T 9286 Paints and varnishes cut test (GB/T 9286-1998, eqv ISO 2409.1992) GB/T 9754 Paints and varnishes contain metallic paint films of 20 °, 60 ° and 85 ° specular gloss measurement (GB/T 9754-2007, ISO 2813.1994, IDT) GB/T 10125 artificial atmosphere corrosion test salt spray test (GB/T 10125-1997, eqv ISO 9227.1990) GB/T 15565 graphics (all parts) Symbol Term GB/T 16422.2 Plastics - Methods of exposure to laboratory light sources - Part 2. Xenon arc lamp (GB/T 16422.2-1999, idt ISO 4892-2.1994) GB/T 16422.4 plastic laboratory light exposure test methods - Part 4. Open a carbon arc lamp (GB/T 16422.4- 1996, eqv ISO 4892-4.1994) ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 26443-2010_English be delivered?

Answer: Upon your order, we will start to translate GB/T 26443-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 26443-2010_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 26443-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.