GB/T 26340-2010 English PDFUS$399.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 26340-2010: Adjustable rehabilitation training bed Status: Valid
Basic dataStandard ID: GB/T 26340-2010 (GB/T26340-2010)Description (Translated English): Adjustable rehabilitation training bed Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: C30 Classification of International Standard: 11.180.99 Word Count Estimation: 17,157 Date of Issue: 2011-01-14 Date of Implementation: 2011-05-01 Quoted Standard: GB/T 3768; GB 9706.1; GB/T 10357.6 Regulation (derived from): National Standard Approval Announcement 2011 No.118 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the terms and definitions adjustable rehabilitation beds, classification and models, safety requirements, technical requirements, test methods, such as manual and labels. Manual or electric adjustable bed rehabilitation rehabilitation This standard applies to the use of rehabilitation training, PT rehabilitation beds, upright rehabilitation beds, multi postural rehabilitation beds. GB/T 26340-2010: Adjustable rehabilitation training bed---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Adjustable rehabilitation training bed ICS 11.180.99 C30 National Standards of People's Republic of China Adjustable bed rehabilitation Issued on. 2011-01-14 2011-05-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsIntroduction Ⅲ 1 Scope 1 2 Normative references 1 3 Terms, Definitions and Abbreviations 1 4 Classification and type 4 Training 5 Bed 5 Common safety requirements 6 bed upright specific safety requirements 8 7 Electrical Technical Requirements 9 8 9 Test Method 9 inspection rules 11 10 Owner's Manual 12 11 Label 12ForewordThe reference to the standards EN1970.2000 "bed requirements and test methods for the disabled Adjustment" (in English). The standard proposed by the People's Republic of China Ministry of Civil Affairs. This standard by the national rehabilitation and special equipment Standardization Technical Committee on Persons with Disabilities (SAC/TC148) centralized. This standard was drafted. National Rehabilitation Device Quality Supervision and Inspection Center, Changzhou Jing-Qian rehabilitation Equipment Co., Ltd., Zhongshan City Chen Kang Instruments Ltd. Complex. The main drafters. Zhang Hongtao, Fan Jincheng, Wang Baohua, Gu Yaling, in Juan-juan, Bi Jianming, He Jianhui, Zhang Jian. Adjustable bed rehabilitation1 ScopeThis standard specifies the terms and definitions adjustable bed rehabilitation training, classification and models, security requirements, technical requirements, test methods, the use of Specification and labels. Manual or electric This standard applies to rehabilitation rehabilitation training using adjustable rehabilitation beds, PT rehabilitation beds, straight Li rehabilitation beds, multi-position rehabilitation bed.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. Cited documents dated, its subsequent repair Change a single (not including errata content) or revisions do not apply to this standard, however, encourage the parties to study whether according to the agreement You can use the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 3768 Determination of sound pressure of sound power levels of noise sources using an enveloping surface reflectance measuring surface Simple Method GB 9706.1 Medical electrical equipment Part 1. General requirements for safety GB/T 10357.6 single bed Furniture mechanical properties test strength and durability 3 Terms, definitions and abbreviations 3.1 Terms and Definitions The following terms and definitions apply to this standard. 3.1.1 There are one or more blocks deck, you can adjust the height and (or) angle, the bed surface assist users in rehabilitation training activities in bed, including Specified by the manufacturer so that the device can be used normally required attachments. 3.1.2 PT rehabilitation beds physicaltherapyrehabilitationtrainingbed In the physical therapist assisted body exercise training using, you can adjust the height of the bed (see Figure 1). 3.1.3 Upright rehabilitation beds standuprehabilitationtrainingbed The bed can be adjusted to the bed and perpendicular to the ground, the auxiliary support user performs standing training (see Figure 2). 3.1.4 Multi-position rehabilitation bed multi-body-positionrehabilitationtrainingbed There are more than two deck, the height can be adjusted independently of each bed, and (or) the angle of the auxiliary user performs a variety of positions bed training (see image 3). 3.1.5 Bed lifting frame bedlift Adjusting Training in bed height or angle change bed training, training and support bed shelf. 3.1.6 Safe working load safeworkingload Training does not cause personal injury or damage to the bed of the maximum permissible load, including users, bed, mattress and accessories, as well as other bed Lifting frame member is lifted. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 26340-2010_English be delivered?Answer: Upon your order, we will start to translate GB/T 26340-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 26340-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 26340-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
