GB/T 21666-2025 English PDFUS$354.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 21666-2025: Absorbent incontinence aids for urine and/or faeces - General guidelines on evaluation Status: Valid GB/T 21666: Historical versions
Basic dataStandard ID: GB/T 21666-2025 (GB/T21666-2025)Description (Translated English): Absorbent incontinence aids for urine and/or faeces - General guidelines on evaluation Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: C30 Classification of International Standard: 11.180 Word Count Estimation: 18,123 Date of Issue: 2025-02-28 Date of Implementation: 2025-06-01 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 21666-2025: Absorbent incontinence aids for urine and/or faeces - General guidelines on evaluation---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. GB/T 21666-2025 English version. Absorbent incontinence aids for urine and/or faeces - General guidelines on evaluation ICS 11.180 CCSC30 National Standard of the People's Republic of China Replace GB/T 21666-2008 Incontinence urine and stool absorption aids General Guidelines for Reviews General guidelines one valuation (ISO 15621.2017, IDT) Released on 2025-02-28 2025-06-01 Implementation State Administration for Market Regulation The National Standardization Administration issued Table of ContentsPreface III Introduction IV 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Evaluation Principles 3 4.1 General Principles 3 4.2 User-related factors 4 4.3 Product-related factors 5 4.4 Use-related factors 7 4.5 Evaluation Method 8 Reference 10ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document replaces GB/T 21666-2008 "General Guidelines for the Evaluation of Urine Absorption Assistive Devices" and is consistent with GB/T 21666-2008. In addition to structural adjustments and editorial changes, the main technical changes are as follows. --- Changed the scope of the document (see Chapter 1, Chapter 1 of the.2008 edition); --- Added "General Terms" (see 3.1); --- Added "Product Type" (see 3.2); --- Changed the factors to be considered in the evaluation, and divided the factors to be considered into three groups (see 4.2, 4.3, 4.4, 3.2 of the.2008 edition); --- Deleted the provisions of "inspection selection" (see 3.3 of the.2008 edition); --- Added the provisions of “evaluation method” (see 4.5). This document is equivalent to ISO 15621.2017 "General guidance for the evaluation of aids for the absorption of urine and feces for incontinence". The following minimal editorial changes were made to this document. --- Deleted the note of 4.4.5; --- Deleted the information on product safety management of urine and feces absorption aids for incontinence in Europe and the United States in 4.4.7. Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document is issued by the Ministry of Civil Affairs of the People's Republic of China. This document is under the jurisdiction of the National Technical Committee for Standardization of Rehabilitation and Special Equipment for Persons with Disabilities (SAC/TC148). This document was drafted by. National Rehabilitation Equipment Research Center, Cancer Hospital of Chinese Academy of Medical Sciences, Peking Union Medical College Hospital of Chinese Academy of Medical Sciences Hospital, Zhejiang Yiwei Medical Products Co., Ltd., and Coloplast (China) Medical Products Co., Ltd. The main drafters of this document are. Liu Junling, Li Mingjie, Ma Lifang, Ma Fengling, Guo Huan, Fang Pengyue, Wang Xiangyu, Li Xinyue, Zhu Yunping, Wang Jiajun and Lian Lian. The previous versions of this document and the documents it replaces are as follows. ---First published in.2008 as GB/T 21666-2008; ---This is the first revision.IntroductionIncontinence is a disease that affects 4% to 8% of the world's population, about 400 million people. Urine and fecal absorption aids can help patients with urinary and fecal incontinence live longer. There are many urine and stool absorbent devices on the market that can help people stay dry and comfortable. Consumers can You can buy it at a pharmacy or supermarket, or from manufacturers or wholesalers through government procurement, but it may be difficult to choose a product that suits you. There are many factors to consider when choosing an incontinence aid, such as. ---Specific needs of users (such as the type and severity of their incontinence); --- Caregiver needs (such as ergonomics in product design); --- The design of the auxiliary device (such as insertable diapers, one-piece diapers, elastic diapers), characteristics (such as absorption performance and ease of wearing) degree) and cost; ---Environmental factors. Currently, there is a limited amount of published data on these factors. This document provides guidance on the evaluation of urine and faecal absorbent aids for incontinence. This document describes the needs of people with incontinence and lists the most important issues for users of absorbent aids for incontinence and their caregivers. The key factors are identified and the test methods/interpretation of test results are outlined. Various stakeholders can benefit from using this document, such as purchasers within the healthcare system, nursing home managers, prescribers, caregivers, Manufacturers, suppliers, health funds, insurance companies and users. Each stakeholder often has different priorities and needs. However, it is important to remember that the most important stakeholder is always the user. The user has different Different people have different needs depending on their height, mobility, flexibility, mental health, lifestyle and personal priorities. Consider these factors in order to choose the most suitable product for the user. Suitability for actual use is best determined by trial use of the product by the user. Other criteria that may be helpful in evaluating incontinence aids and conducting user trials include. ---GB/T 10220 General principles of sensory analysis methodology; ---GB/T 16432 Classification and terminology of rehabilitation assistive devices; ---GB/T 21665 Urine absorption aids Evaluation of disposable adult incontinence urine absorption aids from the perspective of users and caregivers Basic principles of assistive devices; ---ISO 11948-1 Urine absorption aids Part 1.Inspection of the complete product. Incontinence urine and stool absorption aids General Guidelines for Reviews1 ScopeThis document provides guidance on the evaluation of urine and feces absorbent aids for incontinence. It also provides information related to urine and feces absorbent aids for incontinence products and General factors related to its use.2 Normative referencesThis document has no normative references.3 Terms and definitionsThe following terms and definitions apply to this document. 3.1 General terms 3.1.1 incontinence absorbentincontinenceaid Products containing absorbent materials that absorb urine and/or absorb/contain feces when the user is incontinent. 3.1.2 Absorption performanceabsorptioncapacity The amount of liquid that can be absorbed by an incontinence absorbent aid (3.1.1) under specified conditions 3.1.3 absorption speed acquisitionspeed The time required, under specified conditions, for a specified amount of liquid to be absorbed into an absorbent aid for incontinence (3.1.1) 3.1.4 end-user People who wear incontinence absorbent aids. 3.1.5 caregiver A person or organization that takes care of a person's daily life, such as dealing with incontinence. 3.1.6 retention capacity The amount of liquid retained by an incontinent absorbent aid (3.1.1) under specified conditions after all liquid not absorbed by the adhesive has been removed. 3.1.7 Rewet The amount of liquid that returns after overflow when an external force or pressure is applied to an incontinent absorbent aid (3.1.1) under specified conditions ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 21666-2025_English be delivered?Answer: Upon your order, we will start to translate GB/T 21666-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 21666-2025_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 21666-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 21666-2025?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 21666-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
