GB/T 25488-2010 English PDFUS$689.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 25488-2010: Integrated model for networked manufacturing system Status: Valid
Basic dataStandard ID: GB/T 25488-2010 (GB/T25488-2010)Description (Translated English): Integrated model for networked manufacturing system Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J07 Classification of International Standard: 35.240.50 Word Count Estimation: 30,369 Date of Issue: 2010-12-01 Date of Implementation: 2011-05-01 Quoted Standard: GB/T 18757-2008; GB/T 22032-2008; GB/T 15312-2008; GB/T 19114.1-2003; GB/T 16980.1-1997 Regulation (derived from): National Standard Approval Announcement 2010 No.9 (Total No.164) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the integrated model manufacturing systems. This standard gives the architecture of networked manufacturing system integration model. Defines a networked manufacturing system integration element model explicitly integrated elements of networked manufacturing system, and gives the relationship of the various elements of the integrated networked manufacturing system object model and object. This standard applies to the enterprise, networked manufacturing consulting services units and unit manufacturing technology to provide network support. GB/T 25488-2010: Integrated model for networked manufacturing system---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Integrated model for networked manufacturing system ICS 35.240.50 J07 National Standards of People's Republic of China Networked Manufacturing System Integration Model Issued on. 2010-12-01 2011-05-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsIntroduction Ⅲ Introduction Ⅳ 1 Scope 1 2 Terms and definitions 1 3 Networked Manufacturing System Integration Reference Architecture Model 3 4 Networked Manufacturing System Integration metamodel 4 Appendix A (informative) Networked Manufacturing System Integration Model 14 Annex B (informative) Networked Manufacturing System Integration Modeling 16 Annex C (informative) Enterprise Networked Manufacturing System Reference Model 19 References 25ForewordThe Standard Appendix A, Appendix B and Appendix C are informative appendices. The standard proposed by the China Machinery Industry Federation. The standard automation systems and integration by the National Standardization Technical Committee (SAC/TC159) centralized. Drafting of this standard. Beijing Machinery Industry Automation Research Institute of Tsinghua University. The main drafters of this standard. Huangshuang Xi, FAN Yu-shun, Li Xiaodong, Liu Ying, Chen Tianhua. This standard is the first to develop.IntroductionSystem integration is the foundation and key network manufacturing, systems integration model is a powerful tool and the basis for system integration. The standard for our manufacturing enterprise information features, specifications networked manufacturing system integration related terms, given the network system Architecture building systems integration model, the definition of networked manufacturing system integration metamodel, defined the elements of the integrated network manufacturing system, And gives the relationships of the various elements of the integrated networked manufacturing system object model as well as between objects. The standards can provide a reference guide for Chinese enterprises to implement networked manufacturing system to enable enterprises to clear Networked Manufacturing System Integration objects and integration relationship guide networked manufacturing system design and development. "Networked Manufacturing System Integration Model" is the recommended standards, as a guiding document for the implementation of enterprise network manufacturing engineering time. Networked Manufacturing System Integration Model1 ScopeThe standard for enterprise networking manufacturing system integration model provides a reference guide. This standard gives the networked manufacturing system integration module Type architecture, the definition of networked manufacturing system integration element model explicitly integrated manufacturing system network elements, and gives network Relationship of each integrated manufacturing system and elements of the object model objects. This standard applies to companies manufacturing network to provide network consulting services units and manufacturing technical support units.2 Terms and definitionsThe following terms and definitions apply to this standard. 2.1 Networked Manufacturing networkedmanufacturing Enterprise use of network technology to carry out general product design, manufacturing, sales, procurement, management and a series of manufacturing activities. 2.2 Networked Manufacturing System networkedmanufacturingsystem Enterprises under the guidance of the guiding ideology, theory and method of networked manufacturing mode, in the manufacture of integrated network platforms and software tools Support, combined with their specific business requirements, design and implementation of network-based manufacturing systems. 2.3 Model model To answer the research question and the expression of specific aspects of the real thing and take various forms (including mathematics, physics, symbols, graphics, or text Word description, etc.), the actual things abstract expression. Note. The model can be used to describe the different stages of the business activity or business life cycle. [GB/T 18757-2008, the definition 3.16] 2.4 System Model systemmodel About the function of the system and the behavior of the system representation. NOTE. The system model is used to improve the performance of the system, and to identify the basic elements of decomposition to the extent needed. It also provides information on these elements, resources And organizational needs, and provide the desired information to define the system. 2.5 System integration model integratedsystemmodel It represents the system and various constituent elements of the composition of the association between the elements and the reference model relationships. System integration model is used to control the various elements of the system As a unified whole operation. 2.6 Architecture architecture The basic configuration of the system (whether physical or conceptual objects or entities) and description of each part of the connection (model). Note. For system integration, and only two architectures, which are. a) System architecture (sometimes referred to as "Class 1" architecture) relates to a system design. Such as an entire enterprise integration system computer control system EC part; b) Business Reference item (sometimes referred to as "Type 2" architecture) involved such as enterprise integration or development and implementation of other enterprise project organization. [GB/T 18757-2008, 3.2 Definition] ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 25488-2010_English be delivered?Answer: Upon your order, we will start to translate GB/T 25488-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 25488-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 25488-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
