GB/T 25121.3-2018 English PDFUS$519.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 25121.3-2018: Railway applications -- Rolling stock equipment -- Capacitors for power electronics -- Part 3: Electric double-layer capacitors Status: Valid
Basic dataStandard ID: GB/T 25121.3-2018 (GB/T25121.3-2018)Description (Translated English): Railway applications -- Rolling stock equipment -- Capacitors for power electronics -- Part 3: Electric double-layer capacitors Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: S35 Classification of International Standard: 29.280 Word Count Estimation: 26,296 Date of Issue: 2018-12-28 Date of Implementation: 2019-07-01 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 25121.3-2018: Railway applications -- Rolling stock equipment -- Capacitors for power electronics -- Part 3: Electric double-layer capacitors---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Railway applications--Rolling stock equipment--Capacitors for power electronics--Part 3. Electric double--layer capacitors ICS 29.280 S35 National Standards of People's Republic of China Rail transit rolling stock equipment power electronic capacitor Part 3. Electric double layer capacitors Part 3. Electric double-layercapacitors (IEC 61881-3.2013, MOD) Published on.2018-12-28 2019-07-01 implementation State market supervision and administration China National Standardization Administration issued ContentForeword III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 2 4 Conditions of use 4 5 Quality requirements and inspection 5 6 overload 15 7 Safety requirements 15 8 logo 15 9 Installation and Application Guidelines 16 Appendix A (informative) Example of application of capacitors 19 Reference 20ForewordGB/T 25121 "Railway Locomotive Vehicle Equipment Power Electronic Capacitor" is divided into three parts. --- Part 1. Paper/plastic film capacitors; ---Part 2. Non-solid electrolyte aluminum electrolytic capacitors; --- Part 3. Electric double layer capacitors. This part is the third part of GB/T 25121. This part is drafted in accordance with the rules given in GB/T 1.1-2009. This section uses the redrafting method to modify the use of IEC 61881-3.2013 "railway locomotive vehicle equipment power electronic capacitors Part 3. Double Electrolyte Capacitors. This section differs from IEC 61881-3.2013 in terms of structure, and the 3.12, 3.21, 5.2.4 "acceptance test" is deleted, which will be "constant". After the damp heat test, the capacitor unit (if applicable) or the capacitor and the outer casing of the capacitor bank shall be tested for insulation in accordance with 5.5" from 5.8.2.4 Move to 5.8.2.6. This section has technical differences compared to IEC 61881-3.2013, and the terms involved in these differences have been passed on the outside margins. The vertical single line (|) of the position is marked. The specific technical differences and their causes are as follows. --- Revised the scope of Chapter 1, supplementing the content of the standard; ---About the normative reference documents, this part has made technical adjustments to adapt to China's technical conditions, adjustments The situation is reflected in Chapter 2, “Regulatory Citations”, and the specific adjustments are as follows. ● Replace IEC 60721-3-5 with GB/T 4798.5-2007 modified with international standards (see 4.1.3, 4.2); ● Replace IEC 62498-1.2010 with GB/T 32347.1-2015 modified with international standards (see 4.1.2); ● Replace GB/T 32350.1-2015 with international standards instead of IEC 62497-1 see 5.5.2.1, 9.7); ● Replace IEC 60068-2-78 with GB/T 2423.3 using international standards (see 5.8.2.4); ● Replace IEC 60068-2-20 with GB/T 2423.28 equivalent to the international standard (see 5.9.1); ● Replace IEC 60068-2-21 with GB/T 2423.60 equivalent to the international standard (see 5.9.1); ● Replace IEC 61373.2010 with GB/T 21563 modified with international standards (see 5.9.3); ● Replace IEC 62236-3-2 with GB/T 24338.4 modified with international standards (see 5.14); ● Replace IEC 60571.1998 with GB/T 25119-2010 modified with international standards (see 5.14); ● Replace IEC 62391-1.2006 with IEC 62391-1.2015 (see 5.4.1, 5.4.2, 5.12, 5.13); ● Added normative reference document GB/T 2691-2016 (see 8.1.1, 8.1.2); --- Modified 3.1 capacitor components (or components), 3.8 pressure relief structure, 3.14 operating temperature, 3.15 working environment temperature, 3.16 upper limit The term temperature definition of the category temperature and the lower limit category temperature of 3.17 is unified with the other two parts; --- Modified the terminology of 3.7 power electronic capacitors, changed to electric double layer capacitors, this part of the standard mainly involves power electronic capacitors Electric double layer capacitor; --- Removed Tamb in 3.18, 3.12 maximum peak current, 3.21 steady state temperature, not used in the text; --- Modified 4.1.2 altitude requirements, the current main product use altitude range increased from 1400m to 2500m to suit me National condition --- Revised the "climate ambient temperature" in 4.1.3, 4.2, 9.3.2 as "ambient temperature" to comply with GB/T 4798.5-2007 description; --- Modified 4.1.3 temperature range, from -25 ° C ~ 40 ° C to -40 ° C ~ 40 ° C, to adapt to China's national conditions; --- Increased the heat treatment time requirement in 5.1.5, and clarified the experimental method; --- Removed the 5.2.4 "acceptance test" to meet the actual situation in China; --- Added the requirements of 5.3.1 unless otherwise specified by the supplier and the buyer to adapt to China's national conditions; --- Revised the voltage holding capacity test time in 5.4.2, changed from "16h, 24h or 48h" to "16h, 24h, 48h or 72h, In line with China's national conditions; --- Increased the exposure duration requirement in 5.8.1.4 to improve the test assessment requirements; --- Increased the insulation test of the constant damp heat test in 5.8.2.6 to adapt to China's national conditions; --- Revised the "appearance inspection" of 5.9.2 as "general inspection" and increased the weighing requirements, in line with China's national conditions; --- Increased the qualification criteria for capacitors that do not explode or deform in 5.13, in line with China's national conditions; --- Revised the capacitance deviation in 8.1.1, changed from "%" to "% or the deviation generation specified in Chapter 5 of GB/T 2691-2016 Code, optional", in line with China's national conditions. This section also made the following editorial changes. --- Removed the notes of 3.17, 3.18, 5.1.2; ---Modified 1A and 1B, 2A and 2B in Table 1 are 1, 2; --- Revised the "self-discharge" test item in Table 1 for the "voltage holding capacity" commonly used in the industry; --- Fixed the wrong parameter unit in 5.5.1.1.2; --- Modified Note 1 and Note 2 of 8.2; --- Revised the name of Appendix A, consistent with the content, deleted the number and title of A.1, there is no A.2 in this part. Please note that some of the contents of this document may involve patents. The issuing organization of this document is not responsible for identifying these patents. This part is proposed by the National Railway Administration. This part is under the jurisdiction of the National Traction Electrical Equipment and Systems Standardization Technical Committee (SAC/TC278). This section is responsible for drafting units. Ningbo Zhongche New Energy Technology Co., Ltd., CRRC Zhuzhou Electric Locomotive Research Institute Co., Ltd. Participated in the drafting of this section. Ningbo Jiangbei Jiufang Herong Electric Co., Ltd. and Anhui Tongfeng Electronics Co., Ltd. The main drafters of this section. Yan Dianbo, Song Wenquan, Li Jianming, Wang Jian, Fu Guansheng, Huang Yunqi. Rail transit rolling stock equipment power electronic capacitor Part 3. Electric double layer capacitors1 ScopeThis part of GB/T 25121 specifies the operating conditions, quality requirements and inspection, overload, safety requirements and standards of electric double layer capacitors. Guidelines for the identification, installation and application. This section applies to high-power DC double-layer capacitors used in rail vehicles and their modules or groups.2 Normative referencesThe following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 2421.1-2008 Overview and guidelines for environmental testing of electrical and electronic products (IEC 60068-1.1988, IDT) GB/T 2423.3 Environmental Test Part 2. Test Method Test Cab. Constant Damp Heat Test (GB/T 2423.3-2016, IEC 60068-2-78.2012, IDT) GB/T 2423.22-2012 Environmental testing - Part 2. Test methods Test N. Temperature change (IEC 60068-2-14. 2009, IDT) GB/T 2423.23-2013 Environmental testing - Part 2. Test methods test Q. Seals (IEC 60068-2-17.1994, IDT) GB/T 2423.28 Environmental testing of electrical and electronic products - Part 2. Test methods Test T. Soldering (GB/T 2423.28- 2005, IEC 60068-2-20.1979, IDT) GB/T 2423.60 Environmental testing for electric and electronic products - Part 2. Test methods Tests U. Terminals and overall mountings are strong Degree (GB/T 2423.60-2008, IEC 60068-2-21.2006, IDT) GB/T 2691-2016 Marking code for resistors and capacitors (IEC 60062.2004, IDT) GB/T 4798.5-2007 Environmental conditions for the application of electric and electronic products - Part 5. Use of ground vehicles (IEC 60721-3-5. 1997, MOD) GB/T 21563 rail traffic locomotive equipment shock and vibration test (GB/T 21563-2018, IEC 61373. 2010, MOD) GB/T 24338.4 Electromagnetic compatibility of rail transit Part 3-2. Equipment for rolling stock (GB/T 24338.4-2018, IEC 62236-3-2.2008, MOD) GB/T 25119-2010 Rail transit rolling stock electronic device (IEC 60571.2006, MOD) GB/T 32347.1-2015 Environmental conditions for rail transit equipment - Part 1. Equipment for rolling stock (IEC 62498-1.2010, MOD) GB/T 32350.1-2015 Rail insulation insulation - Part 1. Basic requirements Electrical and electronic equipment clearance Creepage distance (IEC 62497-1.2010, MOD) IEC 62391-1.2015 Electric double-layer fixed capacitors for electrical and electronic equipment - Part 1. General specification (Fixed electric Double-layercapacitorsforuseinelectronicandelectronicequipment-Part 1.Genericspecification) ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 25121.3-2018_English be delivered?Answer: Upon your order, we will start to translate GB/T 25121.3-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 25121.3-2018_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 25121.3-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
