GB/T 24114.1-2022 English PDF

US$399.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 24114.1-2022: Electrical equipment of machines - Sewing machinery numerical control system - Part 1: General technical specification
Status: Valid

GB/T 24114.1: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 24114.1-2022	399	Add to Cart	4 days	Electrical equipment of machines - Sewing machinery numerical control system - Part 1: General technical specification	Valid
GB/T 24114.1-2009	679	Add to Cart	4 days	Electrical equipment of machines -- Digital control system for embroidery machine -- Part 1: General requirements	Obsolete

Similar standards

GB/T 39331   GB/T 16977   GB/T 36415   GB/T 24113.2   GB/T 24113.1   

Basic data

Standard ID: GB/T 24114.1-2022 (GB/T24114.1-2022)
Description (Translated English): Electrical equipment of machines - Sewing machinery numerical control system - Part 1: General technical specification
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J07
Word Count Estimation: 20,219
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 24114.1-2022: Electrical equipment of machines - Sewing machinery numerical control system - Part 1: General technical specification

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Elecrtical equipments of machines -- Sewing machinery numerical control system -- Part 1.General technical specification ICS 29.020 CCSJ07 National Standards of People's Republic of China Replacing GB/T 24114.1-2009 Mechanical Electrical Equipment Sewing Machinery Digital Control System Part 1.General technical conditions Published on 2022-04-15 2022-11-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration directory Preface III Introduction V 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Abbreviations 2 5 Functional Requirements 2 6 Performance Requirements 3 7 Safety and protection requirements 3 8 Environmental adaptability requirements 6 9 EMC requirements8 10 Manufacturing Quality 9 11 Quality Assurance Documents 10 Appendix A (Informative) System View 12 Appendix B (informative) Cross-sectional area and resistance value of grounding cables commonly used in sewing machinery 13 Reference 14

foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents" drafted. This document is part 1 of GB/T 24114 "Digital Control System for Sewing Machinery for Mechanical Electrical Equipment". GB/T 24114 has The following sections were published. --- Part 1.General technical conditions. This document replaces GB/T 24114.1-2009 "Digital Control System of Embroidery Machine for Mechanical and Electrical Equipment Part 1.General Technical Regulations" Compared with GB/T 24114.1-2009, in addition to structural adjustment and editorial changes, the main technical changes are as follows. a) Changed the scope of application of the document (see Chapter 1, Chapter 1 of the.2009 edition); b) Deleted product classification (see Chapter 3, Appendix A of the.2009 edition); c) Terms and definitions added sewing machinery, digital control, numerical control device, digital control system (see 3.1, 3.2, 3.3, 3.4), deleted Electromagnetic Compatibility, Emission, Immunity, Electrical Fast Burst, Electrostatic Discharge, Surge (Shock), Voltage Sag (see.2009 edition of 4.1, 4.2, 4.3, 4.4, 4.5, 4.6, 4.7); d) a chapter on abbreviations has been added (see Chapter 4); e) Added functional requirements such as "basic functions", "optional functions" and "special functions" (see 5.1, 5.2, 5.3), and deleted "input and output" Function requirements such as "pattern storage", "data processing", "display", "self-test", "power-off memory" and "control" (see 5.1.1 of the.2009 edition, 5.1.2, 5.1.3, 5.1.4, 5.1.5, 5.1.6, 5.1.7); f) Added performance requirements such as "display performance", "data communication bandwidth and bit error rate", "data exchange standard" and "position control" (see 6.1, 6.2, 6.3, 6.5), delete the performance requirements such as "spindle control accuracy" and "noise" (see 5.2.1, 5.2.4 of the.2009 edition); g) Changed the requirements for speed and accuracy in the performance requirements (see 6.4, 6.6, 5.2.2, 5.2.3 of the.2009 edition); h) Delete the relevant safety requirements for connection and wiring, protection against contact and electric shock, and emergency shutdown (see 5.3.1, 5.3.2,.2009 edition, 5.3.6); i) Added "Basic Safety", "Equipotential Bonding", "Information Security and CCS", "Leakage Current", "Enclosure Protection Level" and "Flame Retardant Performance" Safety requirements such as "thermal protection", "functional safety" and "local lighting safety power supply" (see 7.1, 7.2, 7.3, 7.6, 7.7, 7.8, 7.9, 7.10, 7.11); j) The relevant requirements for protective grounding have been changed (see 7.2.2, 5.3.3 of the.2009 edition); k) Change the relevant requirements of compressive strength (see 7.4, 5.3.5 of the.2009 edition); l) Change the relevant requirements of insulation resistance (see 7.5, 5.3.4 of the.2009 edition); m) Change the storage environment requirements of the product (see 8.1, 5.4.1, 5.4.2, 5.4.3 of the.2009 edition); n) Change the relevant requirements for vibration resistance and shock resistance (see 8.2, 5.5 and 5.6 of the.2009 edition); o) Added the requirement of "anti-fouling performance" (see 8.3); p) Changed the relevant requirements for product drop (see 8.4, 5.7 of the.2009 edition); q) Change the relevant requirements of power adaptability (see 8.5, 5.4.4 of the.2009 edition); r) Deleted "Continuous Operation Requirements" and "General Requirements" (see 5.9 and 5.10 of the.2009 edition); s) Change the relevant requirements of "emission limit" (see 9.1, 5.8.1 of the.2009 edition); t) Added "Electrostatic Discharge Immunity Requirements", "Fast Transient Burst Immunity Requirements", "RF AM Immunity Requirements", "Surge (electrical Voltage) Immunity Requirements" "Voltage dips and short interruptions immunity" (see 9.2.1, 9.2.2, 9.2.3, 9.2.4, 9.2.5); u) Deleted "Enclosure port immunity", "Signal port immunity", "AC power input/output port immunity" (see.2009 edition) 6.8.2, 6.8.3, 6.8.4); v) Added "Manufacturing Quality" (see Chapter 10); w) Added "Quality Assurance Documents" (see Chapter 11); x) Added "System View" (see Appendix A); y) Added "Cross-sectional area and resistance value of grounding cables commonly used in sewing machinery" (see Appendix B). Please note that some content of this document may be patented. The issuing agency of this document assumes no responsibility for identifying patents. This document is proposed by China Machinery Industry Federation. This document is under the jurisdiction of the National Standardization Technical Committee of Industrial Machinery and Electrical Systems (SAC/TC231). This document is drafted by. Beijing Dahao Technology Co., Ltd., Jack Sewing Machine Co., Ltd., Zhejiang Zhongjie Sewing Technology Co., Ltd. Company, Zhejiang Hulong Technology Co., Ltd., Zhejiang Meiji Sewing Machine Co., Ltd., Shanggong Richpeace Intelligent Manufacturing (Tianjin) Co., Ltd., Shanghai Haifushan Precision Machinery Technology Co., Ltd., Mianyang Weibo Electronics Co., Ltd., Guangdong Yuanyi Technology Industrial Co., Ltd., Shanghai Pinyi Information Technology Co., Ltd., Anhui Jieyu Shoe Machinery Technology Co., Ltd., Zhejiang Yuelong Sewing Equipment Co., Ltd., Zhejiang Dole Sewing Machine Co., Ltd. Ltd. The main drafters of this document. Ru Shuiqiang, Fan Wangqing, Hu Wenhai, Chen Xuhua, Qian Min, Wang Ruren, Gao Zhizhi, Xu Xiuliang, Li Jie, Xu Xiaolin, Xu Bingshun, Wang Manjiang, Zhang Hanmiao, Lu Konggui. The previous versions of this document and its superseded documents are as follows. ---First released in.2009 as GB/T 24114.1-2009; ---This is the first revision.

Introduction

With the advent of the era of Industry 4.0, the entire sewing machinery industry in my country is transforming in the direction of automation and digitization. Digital control will gradually replace manual labor and become the mainstream of the industry. The digital control system of the sewing machine is the main component to realize the digital control of the sewing machine. The digital control system controls the action of each unit of the sewing machine, so as to realize the automation of the sewing machine. At the same time, through the server and digital control Data exchange between systems can realize interconnection and data sharing between sewing machines. GB/T 24114 "Mechanical and electrical equipment "Preparation of Sewing Machinery Digital Control System" ensures the basic performance and safety performance of the sewing machinery digital control system, and solves the problem of sewing machinery interconnection. The matching problem in the intercommunication process is proposed to be composed of four parts. --- Part 1.General technical conditions. The purpose is to standardize the basic functions and performances common to all kinds of sewing machinery digital control systems Requirements and safety protection performance, environmental adaptation performance, electromagnetic compatibility performance, manufacturing quality, packaging and transportation requirements. --- Part 2.Data dictionary. The purpose is to convert the static data, dynamic data and status of various sewing machinery and equipment in the process of processing. Data, processing process and result data, alarm maintenance data, etc. are regulated in accordance with the requirements of GB/T 33863 "OPC Unified Architecture". Fan, forming the basic data dictionary for the interconnection of sewing machinery. --- Part 3.Data exchange. The purpose is to establish the data between the digital control system and the server on the basis of the second part Exchange protocol to realize freedom between management software such as MES, VMS, MDC, SCADA and sewing machinery digital control system data exchange. Establish sewing machinery equipment models and mapping requirements between models and protocols, and finally realize the interconnection of sewing machinery Interoperability and data sharing under the premise of security assurance. --- Part 4.Test and acceptance. The purpose is to provide specifications for the experimental verification of the requirements of Parts 1 to 3. Mechanical Electrical Equipment Sewing Machinery Digital Control System Part 1.General technical conditions

1 Scope

This document specifies the functional requirements, performance requirements, safety and protection requirements, environmental Suitability requirements, EMC requirements, manufacturing quality and quality assurance documents. This document is applicable to the digital control system of industrial and civil sewing machinery, other similar products and the cloud platform for sewing machinery, etc. Refer to the implementation.

2 Normative references

The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document. GB/T 3797-2016 Electrical Control Equipment GB/T 4208-2017 Protection class of enclosure (IP code) GB/T 4588.2-1996 Specification for single and double-sided printed boards with metallized holes GB/T 4588.4-2017 Sub-specification for rigid multilayer printed boards GB 4706.1-2005 Safety of household and similar electrical appliances - Part 1.General requirements GB/T 5226.1-2019 Mechanical and Electrical Safety Mechanical and Electrical Equipment Part 1.General Specifications GB/T 5226.31-2017 Mechanical and Electrical Safety Mechanical and Electrical Equipment Part 31.Sewing Machines, Sewing Units and Sewing Systems special safety and EMC requirements for GB/T 8129 Industrial Automation System Machine Tool Numerical Control Vocabulary GB/T 16935.1-2008 Insulation coordination of equipment in low-voltage systems - Part 1.Principles, requirements and tests GB 28526-2012 Functional safety of electrical, electronic and programmable electronic control systems related to safety of machinery and electrical safety GB/T 30420 (all parts) Sewing Machine Terminology UL94 Safety Standard Equipment and Electrical Components for Flammability Testing of Plastic Materials (StandardforSafety-Testsfor

3 Terms and Definitions

Terms and definitions defined in GB/T 8129, GB/T 30420 (all parts) and the following terms and definitions apply to this document. 3.1 sewing machinery sewingmachinery Special sewing machines used for the production of clothing, shoes and hats, luggage, etc. Cutting, ironing, conveying management and other machinery and down processing equipment. Note. See Appendix A for the main classification of sewing machinery. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 24114.1-2022_English be delivered?

Answer: Upon your order, we will start to translate GB/T 24114.1-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 24114.1-2022_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 24114.1-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 24114.1-2022?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 24114.1-2022 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.