GB/T 24113.2-2019 English PDF

US$759.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 24113.2-2019: Electrical equipment of machines -- Computer control systems for plastics machinery -- Part 2: Test and evaluation method
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 24113.2-2019	759	Add to Cart	6 days	Electrical equipment of machines -- Computer control systems for plastics machinery -- Part 2: Test and evaluation method	Valid

Similar standards

GB/T 39331   GB/T 16977   GB/T 36415   GB/T 45349   GB/T 24114.1   GB/T 24113.1   

Basic data

Standard ID: GB/T 24113.2-2019 (GB/T24113.2-2019)
Description (Translated English): Electrical equipment of machines -- Computer control systems for plastics machinery -- Part 2: Test and evaluation method
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J07
Classification of International Standard: 25.010; 35.020
Word Count Estimation: 38,366
Date of Issue: 2019-06-04
Date of Implementation: 2020-01-01
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 24113.2-2019: Electrical equipment of machines -- Computer control systems for plastics machinery -- Part 2: Test and evaluation method

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Electrical equipment of machines--Computer control systems for plastics machinery--Part 2. Test and evaluation method ICS 25.010; 35.020 J07 National Standards of People's Republic of China Mechanical and electrical equipment plastic machinery computer control system Part 2. Test and evaluation methods plasticsmachinery-Part 2.Testandevaluationmethod Published on.2019-06-04 2020-01-01 implementation State market supervision and administration China National Standardization Administration issued

Content

Foreword V 1 Scope 1 2 Normative references 1 3 Terms and Definitions 2 4 Test and evaluation 2 4.1 Test conditions 2 4.1.1 Normal test atmospheric conditions 2 4.1.2 Arbitration test atmospheric conditions 2 4.1.3 Baseline atmospheric conditions 2 4.1.4 Test and measurement equipment 2 4.2 Climate Environmental Test 3 4.2.1 Dry heat and dry heat resistance test for storage and transportation 3 4.2.2 High temperature and low temperature operation test 5 4.2.3 Temperature change operation test 6 4.2.4 Alternating Damp Heat Test 7 4.3 Mechanical environment test 8 4.3.1 Vibration test 8 4.3.2 Impact test 9 4.3.3 Free fall test 10 4.4 Power Condition Test 11 4.4.1 Operating voltage range test 11 4.4.2 Voltage Harmonic Test 12 4.5 Inspection of manufacturing quality (test) 13 4.5.1 Overview 13 4.5.2 Structure and appearance inspection 13 4.5.3 Marking and marking inspection 13 4.5.4 Color Inspection 13 4.5.5 Wiring and Cable Connection Inspection 14 4.5.6 Component quality inspection 14 4.5.7 Protection level test 14 4.5.8 Operation and maintenance convenience test 14 4.6 Interface and communication test 14 4.6.1 Test requirements 14 4.6.2 Inspection (test) method 15 4.7 Functional Test 15 4.7.1 Test requirements 15 4.7.2 Inspection (test) 15 4.8 Performance test 15 4.8.1 Temperature indication accuracy test 15 4.8.2 Temperature Control Accuracy Test 16 4.8.3 Position detection accuracy test 16 4.8.4 Pressure and speed control accuracy test 17 4.8.5 Digital and Analog I/O Interface Capability Test 17 4.9 Safety Test 17 4.9.1 Overview 17 4.9.2 Basic safety inspection 17 4.9.3 Electric shock protection test 18 4.9.4 Protection coupling (protective earthing) test 18 4.9.5 Insulation resistance test 19 4.9.6 Withstand voltage test 20 4.9.7 Fire protection and flame retardancy test of non-metallic materials 21 4.10 Reliability Test 21 4.11 Inspection of accompanying documents 21 4.11.1 Inspection requirements 21 4.11.2 Inspection method 22 4.12 Inspection of packaging, storage and transportation 22 4.12.1 Inspection requirements 22 4.12.2 Inspection method 22 5 Test (test) classification and judgment rules 23 5.1 Test (inspection) classification and requirements 23 5.1.1 Stereotype test 23 5.1.2 Type test 23 5.1.3 Factory inspection 23 5.2 Assessment Rules 23 5.2.1 Importance 23 5.2.2 A-level importance 23 5.2.3 Grade B importance 23 Appendix A (Informative Appendix) Reliability Test and Assessment Method 26 A.1 Reliability Test Type 26 A.1.1 Reliability identification and acceptance test 26 A.1.2 Periodic inspection of reliability acceptance test 26 A.2 Selection principle of reliability test plan 26 A.2.1 Timing Censoring Test Scheme 26 A.2.2 Censored sequential test protocol 26 A.3 Calculation of test time 26 A.3.1 Operational inspection throughout the test 26 A.3.2 Calculation of test time 26 A.4 Test conditions 27 A.5 Test sample 27 A.6 Failure judgment basis and accounting principle 27 A.7 Test report 27 Appendix B (informative appendix) Failure judgment and crediting principle of reliability test 30 B.1 Fault Definition 30 B.2 Fault Classification 30 B.3 Judgment and accounting principle of correlation failures 30 B.4 Non-associative fault 30 B.4.1 Attribute failure 30 B.4.2 Misuse Faults 30 B.4.3 induced faults 30 Reference 31

Foreword

GB/T 24113 "Mechanical and electrical equipment plastic machinery computer control system" is divided into the following parts. --- Part 1. General technical conditions; --- Part 2. Test and evaluation methods; This part is the second part of GB/T 24113. This part is drafted in accordance with the rules given in GB/T 1.1-2009. This part was proposed by the China Machinery Industry Federation. This part is under the jurisdiction of the National Industrial Machinery and Electrical Systems Standardization Technical Committee (SAC/TC231). This section is mainly drafted by. Ningbo Hongxun Technology Co., Ltd., Beijing Machine Tool Research Institute Co., Ltd., Haitian Plastic Machinery Group Co., Ltd. Company, Ningbo Eaststone Technology Co., Ltd., Zhejiang University, etc. The main drafters of this section. Fan Shousu, Yu Tianlong, Yu Yang, Xue Ruijuan, Wang Xinghua, Jiao Xiaolong, Yan Wei, Huang Zuguang, Xia Qinghua, Zhao Peng and so on. Mechanical and electrical equipment plastic machinery computer control system Part 2. Test and evaluation methods

1 Scope

This part of GB/T 24113 specifies the requirements and methods for testing and evaluation of plastic mechanical computer control systems, testing (inspection) Classification and assessment rules. This part is applicable to plastic machinery with rated voltage not exceeding AC1000V, DC1500V and rated frequency not exceeding.200Hz. Computer control system (hereinafter referred to as control system) of supporting equipment (such as feeder, unloader, etc.). Other computers similar to plastic machinery The control system can refer to this section.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 2423.1-2008 Environmental testing of electric and electronic products - Part 2. Test methods Test A. Low temperature GB/T 2423.2-2008 Environmental testing of electrical and electronic products - Part 2. Test methods Test B. High temperature GB/T 2423.4-2008 Environmental testing of electrical and electronic products - Part 2. Test methods Test Db. alternating heat (12h) 12h cycle) GB/T 2423.5-1995 Environmental testing for electric and electronic products - Part 2. Test methods Test Ea and guide. Impact GB/T 2423.7-2018 Environmental test Part 2. Test method Test Ec. Impact from rough operation (mainly used for Equipment sample GB/T 2423.10-2008 Environmental testing of electric and electronic products - Part 2. Test method test Fc. Vibration (sinusoidal) GB/T 2423.22-2012 Environmental testing - Part 2. Test methods Test N. Temperature change GB/T 4208-2017 enclosure protection grade (IP code) GB/T 5169.11-2017 Electrical and electronic products - Fire hazard testing - Part 11. Glowing wire/hot wire basic test method Glow wire flammability test method (GWEPT) GB/T 5169.16-2017 Electrical and electronic products - Fire hazard testing - Part 16. Test flames 50W Horizontal and vertical fires Flame test method GB 5226.1-2008 Mechanical electrical safety machinery and electrical equipment - Part 1. General technical conditions GB/T 6543-2008 Single corrugated carton and double corrugated carton for transport packaging GB/T 6544-2008 corrugated cardboard GB/T 13384-2008 General technical conditions for mechanical and electrical product packaging GB/T 17626.13-2006 Electromagnetic compatibility test and measurement technology AC power port harmonics, interharmonics and grid signals Low frequency immunity test GB/T 24113.1-2009 Mechanical and electrical equipment - Mechanical control systems - Part 1 . General technical conditions GB/T 24342-2009 Industrial machinery electrical equipment protective earthing circuit continuity test specification GB/T 24343-2009 Industrial machinery electrical equipment insulation resistance test specification GB/T 24344-2009 Industrial machinery electrical equipment withstand voltage test specification ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 24113.2-2019_English be delivered?

Answer: Upon your order, we will start to translate GB/T 24113.2-2019_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 24113.2-2019_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 24113.2-2019_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.