GB/T 22355-2008 English PDFUS$114.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 22355-2008: Earth-moving machinery -- Articulated frame lock -- Performance requirements Status: Valid
Basic dataStandard ID: GB/T 22355-2008 (GB/T22355-2008)Description (Translated English): Earth-moving machinery -- Articulated frame lock -- Performance requirements Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: P97 Classification of International Standard: 53.100 Word Count Estimation: 6,696 Date of Issue: 2008-08-26 Date of Implementation: 2009-02-01 Quoted Standard: GB/T 8498 Adopted Standard: ISO 10570-2004, IDT Regulation (derived from): National Standard Approval Announcement 2008 No.14 (Total No.127) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies performance requirements for earth-moving machinery articulated frame locking device. Earthmoving machinery designed to prevent accidents during transportation or maintenance swing. This standard applies to GB/T 8498 defined earthmoving machinery has hinged rack. GB/T 22355-2008: Earth-moving machinery -- Articulated frame lock -- Performance requirements---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Earth-moving machinery. Articulated frame lock. Performance requirements ICS 53.100 P97 National Standards of People's Republic of China GB/T 22355-2008/ISO 10570.2004 Earthmoving machinery Articulated frame lock - Performance requirements (ISO 10570.2004, IDT) Posted 2008-08-26 2009-02-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard is identical with ISO 10570.2004 "moving machinery - Articulated frame lock - Performance requirements" (in English). This standard is equivalent to translate ISO 10570.2004. For ease of use, this standard made the following editorial changes. --- "This International Standard" be replaced by "this standard"; --- Instead of using the decimal point as a decimal point ",". ","; --- Deleted international standards foreword; --- Of ISO 10570.2004 international standard referenced with the international standard has been adopted as the standard instead of the corresponding country. The standard proposed by China Machinery Industry Federation. This standard by the national earthmoving machinery Standardization Technical Committee (SAC/TC334) centralized. This standard is drafted by. Tianjin Institute of Mechanical Engineering. Participated in the drafting of this standard. Xiamen, Xiamen Engineering Machinery Co., Ltd., China Machinery Holdings Limited. Drafters of this standard. Wu Yun Cai, Chen Shu Qiao, Li Wei Ping, Ji enlightened ruler. This standard was first formulated. GB/T 22355-2008/ISO 10570.2004 Earthmoving machinery Articulated frame lock - Performance requirements1 ScopeThis standard specifies performance requirements for earth-moving machinery - Articulated frame locking device, which is designed to prevent or repair of earthmoving machinery transport Accident when swinging. This standard applies to GB/T 8498 defined moving machinery with a hinged rack.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 8498 Earth - moving machinery - Basic types - Identification and terms and definitions (GB/T 8498-2008, ISO 6165.2006, IDT)3 Terms and DefinitionsThe following terms and definitions apply to this standard. 3.1 Link, steel, pin or similar parts, including parts and the hinge point of the machine connected to the frame for preventing earthmoving machinery with a hinged frame Accidents during transportation or repair swing. Note. the machine on its own mobile or traveling without the use of articulated frame lock.4 Requirements4.1 installation location Articulated frame locking device should be able to ensure that the machine is in the state of straight forward, which is mounted on one side of the driver position common import and export, or Installed in the position specified by the manufacturer. If you must make when performing routine maintenance machine steering rack is hinged locking device should also ensure that the machine is required Steering position. Articulated frame locking device designed to be fixed without frequent adjustment in two parts of the machine frame. Machine coupling 4.2 During use and storage racks hinged locking device should be connected to the machine, and the machine can not be disengaged. 4.3 Color Link hinge frame lock should be red, the color should make it visible in the storage location and installation. However, since the machine When being red, the link should use other colors are clear contrast. 4.4 Performance test requirements Performance tests shall be left in the steering system, the right position on the two articulated steering. When articulated frame lock withstand twice the machine specified by the manufacturer of the machine steering system to produce maximum force, it should not be everywhere Any permanent deformation of the structure. GB/T 22355-2008/ISO 10570.2004 ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 22355-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 22355-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 22355-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 22355-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
