GB/T 22359.2-2022 English PDFUS$244.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 22359.2-2022: Earth-moving and building construction machinery - Electromagnetic compatibility(EMC) of machines with internal electrical power supply - Part 2: Additional EMC requirements for functional safety Status: Valid
Basic dataStandard ID: GB/T 22359.2-2022 (GB/T22359.2-2022)Description (Translated English): Earth-moving and building construction machinery - Electromagnetic compatibility(EMC) of machines with internal electrical power supply - Part 2: Additional EMC requirements for functional safety Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: P97 Classification of International Standard: 53.100 Word Count Estimation: 14,188 Date of Issue: 2022-10-14 Date of Implementation: 2022-10-12 Older Standard (superseded by this standard): GB/T 22359-2008, GB/T 22359-2008 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 22359.2-2022: Earth-moving and building construction machinery - Electromagnetic compatibility(EMC) of machines with internal electrical power supply - Part 2: Additional EMC requirements for functional safety---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Earth-moving and building construction machinery -- Electromagnetic compatibility(EMC) of machines with internal electrical power supply -- Part 2.Additional EMC requirements for functional safety ICS 53.100 CCSP97 National Standards of People's Republic of China Partially replaces GB/T 22359-2008 Earthmoving Machinery and Construction Machinery Electromagnetic Compatibility (EMC) of Machines with Built-in Power Supply Part 2.EMC additional requirements for functional safety (ISO 13766-2.2018, IDT) 2022-10-12 Released 2022-10-12 Implementation State Administration for Market Regulation Released by the National Standardization Administration directory Preface III Introduction IV 1 Scope 1 2 Normative references 1 3 Terms and Definitions 3 4 General rule 3 5 Electromagnetic Compatibility (EMC) Phenomenon 3 5.1 General situation 3 5.2 Mechanical immunity 4 5.3 ESA immunity5 6 Test report 7 Appendix A (Informative) Installation and Maintenance 8 Reference 9 Table 1 Test level of electromagnetic field radiated by non-airborne sources in the frequency range of 20MHz~2700MHz (complete machine) 4 Table 2 Electrostatic discharge (ESD) parameters (complete machine) 5 Table 3 Test level (ESA) 6 of non-airborne sources radiated electromagnetic fields in the frequency range of 1MHz~2700MHz Table 4 Electrostatic discharge (ESD) parameters (ESA) 7 forewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents" drafted. This document is Part 2 of GB/T 22359 "Electromagnetic Compatibility (EMC) of Earth-moving Machinery and Construction Machinery with Built-in Power Supply" point. GB/T 22359 has released the following parts. --- Part 1.EMC general requirements under typical electromagnetic environmental conditions; --- Part 2.EMC additional requirements for functional safety. This document partially replaces GB/T 22359-2008 "Electromagnetic Compatibility of Earthmoving Machinery". Compared with GB/T 22359-2008, except for the In addition to structural adjustments and editorial changes, the main technical changes are as follows. --- Added additional EMC requirements for functional safety (full text). This document is equivalent to ISO 13766-2.2018 "Electromagnetic Compatibility of Earth-moving Machinery and Construction Machinery with Built-in Power Supply" (EMC) Part 2.Additional EMC Requirements for Functional Safety. Please note that some content of this document may be patented. The issuing agency of this document assumes no responsibility for identifying patents. This document is proposed by China Machinery Industry Federation. This document is under the jurisdiction of the National Earthmoving Machinery Standardization Technical Committee (SAC/TC334). This document is drafted by. Fujian Minxuan Technology Co., Ltd., Shantui Construction Machinery Co., Ltd., Shandong Lingong Construction Machinery Co., Ltd., Xiamen Xiagong Machinery Co., Ltd., Tianjin Construction Machinery Research Institute Co., Ltd., MCC Jingcheng (Xiangtan) Mining Equipment Co., Ltd. Company, Guangxi Liugong Machinery Co., Ltd. The main drafters of this document. Yan Zhuling, Wang Bingyun, Cui Yongguo, Lin Bingfeng, Liu Jiao, Shen Piaopiao, Zhang Qiang, Chen Huiling. This document was first published in.2008, this is the first revision, and it is published in parts.IntroductionGB/T 22359 provides test methods and standards covering the characteristics and operating parameters of the machine, and is intended to consist of two parts. --- Part 1.EMC general requirements under typical electromagnetic environmental conditions. The purpose is to determine the evaluation of earthmoving machinery and building construction Test methods and acceptance criteria for mechanical electromagnetic compatibility (EMC). --- Part 2.EMC additional requirements for functional safety. The purpose is to evaluate electromagnetic compatibility (EMC) for earth-moving machinery and construction Effects of functional safety of construction machinery controls. The scope of this document describes the relevant machinery and the extent of the hazard, hazardous situation or hazardous event. This document is a Type C standard described by ISO 12100.2010.When the requirements of Type C standards are different from those of Type A or Type B standards, for For machines designed and manufactured in accordance with the requirements of this Class C Standard, the requirements of this Class C Standard take precedence over the requirements of other standards. With the widespread use of electronic equipment in the working areas of earthmoving machinery and construction machinery, it is necessary to ensure that the machinery has sufficient resistance to electromagnetic disturbances. noise immunity. As more and more machinery is equipped with electrical and electronic equipment, it is also necessary to ensure that the internal subsystems of the machinery are induced by electromagnetic emissions. The resulting internal electromagnetic interference (machine interference) is lower than the immunity of the individual subsystems. The electrical disturbances and high-frequency disturbances described in this document refer to electromagnetic effects due to technical application (artificial effects). These electromagnetic effects are can often be considered singular and restricted to narrow areas. Although these mechanical effects cannot be considered universal, their mechanical effects still need to be considered. they have no In a large frequency range with the same electrical characteristics, it is generated by conduction or radiation, and can be transmitted to other electrical/electronic equipment and systems. Depend on Narrow-band signals or occasionally wide-band signals generated by sources of internal or external interference in machinery may also couple into electrical/electronic systems and affect Normal functioning of electrical/electronic equipment. Electrostatic discharge is mechanically related because control elements can be placed outside the driver's position and potential differences can develop at the contact points. Machinery may contain open systems that combine multiple devices or components to complete the machine's function, it is necessary to consider conduction in power wiring transient. This document provides information on the types and levels of known effects. Under the premise that the machine characteristics and operating parameters are fully considered and voluntarily To carry out the test of the test level acceptable to the machine, the instructive test methods and standards can be obtained from the test data. despite this, The functionality of these machines is not something that can only be assessed through experimentation. Functional safety assessments regarding EMC phenomena can also be This is achieved through organizational measures at the site and at the job site. Machinery has multiple systems, including components that can be used in multiple machine types. ESA specified in this document or ESA separated from machinery The test methods are suitable for measuring the immunity and radiation of these components and make these components available in existing laboratory facilities (including specially equipped prepared shielded room) for evaluation. When testing electrical/electronic subassemblies, it is necessary to consider the any additional effects. These tests can also be performed mechanically. Programmable electronic system (PES) as defined in ISO 13849-1.2015, intended for use in ISO 15998.2008 with pre- Safety-related components (SRP/CS) of the control system for the intended functional measures. If a function becomes dangerous when disturbed, sometimes The manufacturer of the PES does not know, as it depends on the intended application in the safety-related system of the entire machine. Therefore, it is necessary to This document conducts tests to demonstrate the application of PES in safety-related systems. Earthmoving Machinery and Construction Machinery Electromagnetic Compatibility (EMC) of Machines with Built-in Power Supply Part 2.EMC additional requirements for functional safety1 ScopeThis document specifies the evaluation of earth-moving machinery as defined in GB/T 8498-2017 and the following construction facilities as defined in ISO /T R12603.2010 Test methods and acceptance criteria for electromagnetic compatibility (EMC) of industrial machinery. ---Drilling and foundation construction equipment; ---Concrete and mortar preparation, conveying, tamping equipment and steel bar processing equipment; ---Road construction and maintenance machinery and equipment. This document deals with electromagnetic compatibility related to the functional safety of mechanical, electrical/electronic devices (ESA) and mechanically separated ESA components (EMC) requirements. This document is only applicable to the control system safety-related components (SRP/CS) defined in GB/T 16855.1-2018, which use electrical/ The electronic device meets the design requirements that are greater than or equal to the safety performance level PL specified in GB/T 16855.1-2018.It also involves Electrical/Electronic Apparatus (ESA) and individual ESA components that meet the requirements of PL for b class and are intended to be installed on machinery. Evaluate the following electromagnetic disturbance phenomena. --- Electromagnetic fields radiated by non-airborne sources of different field strengths and frequencies; --- Radiated electromagnetic fields from airborne sources (inside/outside the antenna) of different field strengths and frequencies; ---Electrostatic discharge; --- Conducted and coupled electrical transients. The machine may be powered by DC, AC, or a combination of both as the internal power system. This document does not apply to machinery powered by an external grid or as equipment for military applications. Note. IEC 61000 covers grid-connected machines.2 Normative referencesThe contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document. GB/T 8498-2017 Earth-moving machinery basic type identification, terms and definitions (ISO 6165.2012, IDT) GB/T 15706-2012 General Principles of Mechanical Safety Design Risk Assessment and Risk Reduction (ISO 12100.2010, IDT) GB/T 16855.1-2018 Safety-related parts of machinery safety control systems - Part 1.General rules for design (ISO 13849-1. 2015, IDT) GB/T 22359.1-2022 Electromagnetic Compatibility (EMC) of Earth-moving Machinery and Construction Machinery with Built-in Power Supply Part 1 Part. EMC general requirements under typical electromagnetic environmental conditions (ISO 13766-1.2018, IDT) GB/T 34353-2017 Performance criteria for functional safety of machine control systems (MCS) for earth-moving machinery application electronics and test (ISO 15998.2008, IDT) ISO 7637-1.2015 Electrical disturbances caused by conduction and coupling in road vehicles - Part 1.Definitions and general description (Road ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 22359.2-2022_English be delivered?Answer: Upon your order, we will start to translate GB/T 22359.2-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 22359.2-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 22359.2-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
