GB/T 21412.1-2010 English PDFUS$3314.00 · In stock
Delivery: <= 10 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 21412.1-2010: Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 1: General requirements and recommendations Status: Valid
Basic dataStandard ID: GB/T 21412.1-2010 (GB/T21412.1-2010)Description (Translated English): Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 1: General requirements and recommendations Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: E94 Classification of International Standard: 75.180.10 Word Count Estimation: 166,180 Date of Issue: 2010-09-02 Date of Implementation: 2010-12-01 Quoted Standard: GB/T 19190-2003; GB/T 21412.4-2008; GB/T 21412.6-2009; ISO 3506-1; ISO 2506-2; ISO 10423; ISO 13628-5; ISO 13628-7; ISO 13628-8; ISO 13628-9; API RP 2A; DNV 2.7-1 Adopted Standard: ISO 13628-1-2005, IDT Regulation (derived from): National Standard Approval Announcement 2010 No.4 (Total No.159) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the set of subsea production system from design to general requirements for all stages of waste and recommended practices. As a programmatic document for the development of guidance and standards related to the various sub- components of subsea production systems more detailed requirements. Meanwhile, some parts are not included in the sub- standard, the system design, structure, manifold, lifting equipment, colors and markings, and also gives a more detailed requirements. Subsea production system consists of one or more production of oil and gas subsea wellhead, by relying on a given treatment facilities (fixed platforms, floating facilities, underwater facilities) each subsystem, or onshore processing facilities, or by injection/part of the subsea wellhead gas development and so on. This part of the standard scope of its subsystems will be described in Chapter 4. For those with limited scope of application of special equipment. If sealed in a dry cabin modular Christmas tree, Christmas tree and manifold, etc., devoted not done here, but the relevant provisions of this section apply equally to such equipment. When the requirements of this conflict as part of the requirements associated with supplemental part or inconsistent, then prioritize the special requirements of supplementary parts. GB/T 21412.1-2010: Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 1: General requirements and recommendations---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Petroleum and natural gas industries.Design and operation of subsea production systems.Part 1. General requirements and recommendations ICS 75.180.10 E94 National Standards of People's Republic of China Oil and Gas Industry Design and operation of subsea production systems Part 1. General requirements and recommended practices Part 1. Generalrequirementsandrecommendations (ISO 13628-1.2005, IDT) Issued on. 2010-09-02 2010-12-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsPreface Ⅰ Introduction Ⅱ 1 Scope 1 2 Normative references 1 3 Terms, Definitions and Abbreviations 1 4 system and interface description 5 5 Design 6 6 Materials and corrosion protection 28 7 manufacturing and testing 33 8 Operation 35 9 Documentation 43 Appendix A (informative) Description of subsea production systems 44 Appendix B (normative) color and markings 111 Integrity Test Appendix C (informative) underwater production equipment 116 Annex D (informative) Typical commissioning program 120 Annex E (informative) Operations Issue 123 Annex F (informative) 126 Data Sheet Annex G (informative) structure, process valves and piping 132 Appendix H (informative) underwater Oilfield Development Systems Engineering 134 Annex I (informative) Flow Security Considerations 136 Appendix J (informative) Principle of 155 barrier Annex K (normative) winding gear and structural components of atmospheric requirements and recommended practices 158 References 161ForewordGB/T 21412 "Design and operation of oil and gas industry of subsea production systems" Part XI currently includes the following. --- Part 1. General requirements and recommended practices --- Part 2. Flexible pipe systems underwater 1) --- Part 3. Through flowline (TFL) systems --- Part 4. underwater wellhead and tree equipment --- Part 5. underwater umbilical --- Part 6. Subsea production control systems --- Part 8. subsea production system Telerobot (ROV) interfaces --- Part 9. Remote power tool (ROT) Maintenance System The following section is in the drafting stage. --- Part 7. workover/completion riser system --- Part 10. Details of the connection of the flexible tube --- Part 11. Flexible pipe systems underwater This part of GB/T 21412 Part 1, this part identical with ISO 13628-1.2005 "Health and underwater oil and gas industry The design and operation of production systems - Part 1. General requirements and recommended practices "(English 2nd Edition). This section Appendix B, Appendix K are normative appendices, Appendix A, Appendix C, Appendix D, Appendix E, Appendix F, Appendix G, Appendix H, Appendix I, Appendix J informative appendices. This part is proposed by the China National Petroleum Corporation. This part of the jurisdiction of the China National Offshore Oil Standardization Technical Committee of Petroleum Engineering Standardization Technical Committee. This section drafted by. CNOOC Research Center. The main drafters of this section. Li Qingping, Hai Yuan Yao, Xiao Yafei, white lake, Yu Chong West. 1) No amendment.IntroductionThis section is intended for the oil and gas industry to develop applications in various fields of subsea production systems provide general requirements, recommended practices and the use of means south. In order to meet the special requirements of oil and gas fields, to simplify and improve the decision-making process, the basic requirements set forth in this section provide users with a variety of Choose not to replace personal experience in engineering, while in the case of non-enforcement can be optimized to play an active role in guiding the program. Oil and Gas Industry Design and operation of subsea production systems Part 1. General requirements and recommended practices1 ScopeThis part of the development of a package of subsea production systems - from design to waste at all stages of the general requirements and recommended practices, as a programmatic Document to guide the development and relate to the various components of the subsystem standard subsea production systems more detailed requirements. Meanwhile, for daughter Some parts not included in the standard system, such as system design, structure, manifolds, lifting equipment, as well as the color and markings, but also gives a more detailed Requirements. Subsea production system consists of one or more production of oil and gas subsea wellhead, by relying on a given processing facility (fixed platforms, floating facilities, Underwater) or onshore processing facilities, and various other subsystems, or by water/gas development of subsea wellhead and other components. This section and its sub Scope of the system's standard will be described in Chapter IV. For those with limited scope of application of special equipment, such as sealed in the dry cabin modular Christmas tree, Christmas trees and manifolds, etc., without making here Devoted, but the relevant provisions of this section also applies to such equipment. When such conflicting demands associated with the requirements of this part of the supplement or inconsistent, priority is given to the special requirements of complementary parts.2 Normative referencesThe following documents contain provisions which, through reference GB/T 21412 in this section constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 19190-2003 Petroleum and natural gas industries - Drilling and production equipment (ISO 13535.2000, IDT) Subsea wellhead apparatus. Part 4 Design and operation GB/T 21412.4-2008 oil and gas industry of subsea production systems And christmas tree equipment (ISO 13628-4.1999, IDT) Design and operation GB/T 21412.6-2009 oil and gas industry of subsea production systems - Part 6. Subsea production control System (ISO 13628-6.2000, IDT) ISO 3506-1 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1. Screw, screw stud ISO 3506-2 corrosion-resistant stainless steel fasteners mechanical properties - Part 2. Nuts ISO 10423 Petroleum and natural gas industries drilling equipment wellhead and Christmas tree ISO 13628-5 design and operation of oil and gas industry of subsea production systems - Part 5. underwater umbilical ISO 13628-7 design and operation of oil and gas industry of subsea production systems - Part 7. Completion/workover riser systems ISO 13628-8 design and operation of oil and gas industry of subsea production systems - Part 8. subsea production system for the remote control Industrial robot (ROV) interfaces ISO 13628-9 design and operation of oil and gas industry of subsea production systems - Part 9. Remote power tool (ROT) Dimension Repair system APIRP2A Recommended Practice planning, design and construction of fixed offshore platforms desk working stress design 21 edition DNV2.7-1 maritime cargo containers 3 Terms, Definitions and Acronyms This section uses the following terms, definitions and abbreviations. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 21412.1-2010_English be delivered?Answer: Upon your order, we will start to translate GB/T 21412.1-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 6 ~ 10 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 21412.1-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 21412.1-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
