Home Cart Quotation Policy About-Us
www.ChineseStandard.net
SEARCH

GB/T 21411.1-2014 English PDF

Q: How long will the true-PDF of English version of GB/T 21411.1-2014 be delivered?

Upon your order, we will start to translate GB/T 21411.1-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 9 ~ 13 working days. The lengthier the document the longer the lead time.

Q: Can I share the purchased PDF of GB/T 21411.1-2014_English with my colleagues?

Yes. The purchased PDF of GB/T 21411.1-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Q: Does the price include tax/VAT?

Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries). Avoidance of Double Taxation Agreements (DTAs) between Singapore and 100+ Countries: https://www.iras.gov.sg/taxes/international-tax

Q: Do you accept my currency other than USD?

Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Q: Should I purchase the latest version GB/T 21411.1-2014?

Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 21411.1-2014 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.

US$2159.00 · In stock
Delivery: <= 13 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 21411.1-2014: Downhole equipment for petroleum and natural gas industries -- Progressing cavity pump systems for artificial lift -- Part 1: Pumps
Status: Valid

GB/T 21411.1: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 21411.1-2014	2159	Add to Cart	13 days	Downhole equipment for petroleum and natural gas industries -- Progressing cavity pump systems for artificial lift -- Part 1: Pumps	Valid
GB/T 21411.1-2008	RFQ	ASK	6 days	Downhole equipment for petroleum and natural gas industries -- Progressing cavity pump systems for artificial lift -- Part 1: Pumps	Obsolete

Similar standards

GB/T 21447 SY/T 5164 SY/T 5324 GB/T 23506 GB/T 21410 GB/T 21412.4

Basic data

Standard ID: GB/T 21411.1-2014 (GB/T21411.1-2014)
Description (Translated English): Downhole equipment for petroleum and natural gas industries -- Progressing cavity pump systems for artificial lift -- Part 1: Pumps
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: E92
Classification of International Standard: 75.180.10
Word Count Estimation: 98,975
Date of Issue: 12/12/2014
Date of Implementation: 10/1/2015
Older Standard (superseded by this standard): GB/T 21411.1-2008
Quoted Standard: GB/T 230.1; GB/T 231.1; GB/T 528-2009; GB/T 531.1-2008; GB/T 1172-1999; GB/T 1690-2010; GB/T 2828.1-2012; GB/T 4340.1; GB/T 9445-2008; GB/T 19830-2011; GB/T 20972.1; GB/T 20972.2; GB/T 20972.3; GB/T 21411.2-2009; GB/T 27025-2008; ASTM D412-2006; ASTM D429
Adopted Standard: ISO 15136-1-2009, MOD
Regulation (derived from): National Standards Bulletin 2014 No. 30
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This Standard specifies the oil and gas industry with a screw pump artificial lift design, design verification, design validation, production, and data control, performance evaluation, maintenance, operation and storage requirements. This section includes

GB/T 21411.1-2014: Downhole equipment for petroleum and natural gas industries -- Progressing cavity pump systems for artificial lift -- Part 1: Pumps

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Downhole equipment for petroleum and natural gas industries Progressing cavity pump systems for artificial lift Part 1. Pumps ICS 75.180.10 E92 National Standards of People's Republic of China Replacing GB/T 21411.1-2008 Oil and Gas Industry Artificial lift using the screw systems - Part 1. Pumps systemsforartificiallift-Part 1. Pumps (ISO 15136-1.2009, Petroleumandnaturalgasindustries-Progressing cavitypumpsystemsforartificiallift-Part 1. Pumps, MOD) Issued on. 2014-12-22 2015-10-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Introduction Ⅲ 1 Scope 1 2 Normative references 1 3 Terms and definitions 2 4 Abbreviations and Symbols 7 5 Performance Specifications 8 12 6 Technical Specifications Seven pairs supplier or manufacturer's requirements 15 8 Maintenance 24 9 transport, handling and storage 24 Appendix A (informative) screw demand information table 26 Annex B (informative) Installation Guide 29 Annex C (informative) Guide 31 Annex D (normative) Design Qualification 38 Appendix E (normative) Performance Evaluation 42 Annex F (normative) screw synthetic rubber technical requirements 47 Selection and testing of Annex G (informative) rubber screw 51 Appendix H (informative) screw pump performance characteristics supplementary information 59 Annex I (normative) screw test report data table 63 Appendix J (informative) repair and inspection 64 After Annex K (informative) Use Analysis 66 Annex L (informative) auxiliary equipment 77 Annex M (informative) Select the drive screw rod string and use 81 Annex N (informative) of this section and ISO 15136.1.2009 technical differences and their causes 87 References 91

Foreword

GB/T 21411 "oil and gas industry with a screw pump artificial lift system" is divided into two parts. --- Part 1. Pumps; --- Part 2. Ground drive. This section GB/T 21411 Part 1. This section drafted in accordance with GB/T 1.1-2009 given rules. This Part replaces GB/T 21411.1-2008 "oil and gas industry equipment downhole artificial lift system with a portion of the first screw Score. pump ", compared with the GB/T 21411.1-2008, in addition to editorial changes outside the main technical changes are as follows. --- Increasing the normative references (see Chapter 2); --- Added "center deviation" and other terms (see Chapter 3); --- Adds abbreviations and symbols section (see Chapter 4); --- Added "Design Verification" performance specification "performance evaluation", "quality control level" content (see Chapter 5); --- Deleting the contents of the technical specifications "design effectiveness", adding "performance rating" and "design validation" of content (see Chapter 6, Section 5 of the 2008 edition); --- In suppliers and manufacturers requirements, modify the "Design Files" and "Random File" relevant content (see Chapter 7, Chapter 6 of the 2008 edition); --- In suppliers and manufacturers requirements, increasing the "quality" of "detection" content, modifying the "Product ID" tag Content (see Chapter 7, Chapter 6, 2008 edition); --- Increased maintenance of content (see Chapter 8); --- Increased content transport, handling and storage (see Chapter 9); --- Deleted the previous version in addition to the appendix "screw test report data tables" outside all the attachments (see Appendix I, the 2008 edition of Appendix B); --- Added "screw demand information table" (see Appendix A); --- Added "Installation Guide" (see Appendix B); --- Increased "Guide" (see Appendix C); --- Added "Design Verification" (see Appendix D); --- Increased "performance evaluation" (see Appendix E); --- Added "synthetic rubber screw pump technical requirements" (see Appendix F); --- Added "rubber screw pump selection and testing" (see Appendix G); --- Added "screw pump performance characteristics supplementary information" (see Appendix H); --- Added "repair and overhaul" (see Appendix J); --- Increased "after use analysis" (see Annex K); --- Added "auxiliary equipment" (see Appendix L); --- Added "screw driver to select and use the post" (see Appendix M). This section uses redrafted Law Amendment uses ISO 15136-1.2009 "oil and gas industry with a screw pump artificial lift system Part 1. Pumps. " Technical differences exist compared to 2009, is given in Appendix N of the corresponding technical differences and point. This part of ISO 15136-1 List of reason. For ease of use, this section also made the following editorial changes. --- Added Appendix I "screw test report Data Sheet"; --- Added Appendix N "This part of ISO 15136.1.2009 technical differences and their causes"; --- In metric units mainly consider the habits of some of the units have been adjusted. Please note that some of the content of this section may involve patents. This part of the release mechanism does not assume the responsibility to identify these patents. This part of the National Oil Drilling Equipment and Tools Standardization Technical Committee (SAC/TC96) and focal points. This section is responsible for drafting the Beijing Petroleum Machinery Factory, Daqing Oilfield Company Limited Production Engineering Research Institute, Daqing Oilfield force have God Pump Limited, China Petroleum Exploration and Development Research Institute of Oil Gas Equipment Institute, Bohai Drilling Engineering Technology Research Institute, Chinese CNPC Bohai Petroleum Equipment Manufacturing Co., Ltd., the oil industry Machinery Products Quality Supervision and Inspection Station, Shengli Oilfield Highland Petroleum Equipment Co., Ltd. and other parameters Plus draft. The main drafters of this section. Wangxing Yan, Fanyu Zhao, CHEN Xiao-jun, Cao Gang, Li Bin, Pu Xuefeng, Wang Wei, Zhang Lixin, Wei Jide, Tian Xiaoyan, Wu frequency EASTERN Wu Miao law. This part of the standard replaces the previous editions are. --- GB/T 21411.1-2008. Oil and Gas Industry Artificial lift using the screw systems - Part 1. Pumps

1 Scope

This section provides the oil and gas industry with a screw pump artificial lift design, design verification, design validation, manufacturing and control data, of Performance evaluation, the relevant requirements of maintenance, operation and storage. This section includes the normative appendix, test, design validation and performance evaluation of the stator rubber materials and other aspects of the request. this In addition, informative appendix contains the following information. screw demand information table, installation guide, operating instructions, rubber screw pump selection and testing, repair And inspection, evaluation screw after use, screw driver and auxiliary equipment selection rod string. This section applies to artificial lift with screw design, manufacture, inspection, testing, maintenance and storage.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 230.1 metallic materials - Rockwell hardness test - Part 1. Test methods (A, B, C, D, E, F, G, H, K, N, T standard Feet) (GB/T 230.1-2009, ISO 6508-1.2005, MOD) GB/T 231.1 metallic materials Brinell hardness test - Part 1. Test method (GB/T 231.1-2009, ISO 6506-1. 2005, MOD) GB/T 528-2009 vulcanized rubber or thermoplastic rubber tensile stress strain properties (ISO 37.2005, IDT) GB/T 531.1-2008 vulcanized rubber or thermoplastic rubber indentation hardness test methods - Part 1. Shore hardness method [Shao Seoul hardness] (ISO 7619-1.2004, IDT) GB/T 1172-1999 ferrous metal hardness and strength conversion value GB/T 1690-2010 vulcanized rubber or thermoplastic rubber of resistance to liquids - Test methods (ISO 1817.2005, MOD) GB/T 2828.1-2012 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch test sample Programme (ISO 2859-1.1999, IDT) GB/T 4340.1 metallic materials - Vickers hardness test - Part 1. Test method (GB/T 4340.1-2009, ISO 6507- 1.2005, MOD) GB/T 9445-2008 NDT personnel qualification and certification (ISO 9712.2005, IDT) GB/T 19830-2011 oil and gas industry oil and gas well casing or tubing with a steel pipe (ISO 11960.2004, IDT) [ISO 15156 environmental hydrogen sulfide-containing materials GB/T 20972 (all parts) oil and gas industry for oil and gas exploration (the Part)] GB/T 21411.2-2009 oil and gas industry equipment downhole artificial lift with screw systems - Part 2. Ground drive Means (ISO 15136-2.2006, MOD) GB/T 27025-2008 testing and calibration laboratories General requirements (ISO /IEC 17025.2005, IDT) Specification Section Ⅴ ASME Boiler and Pressure Vessel NDT [ASMEBoilerandPressureVesselCode (BPVC), SectionⅤ, NondestructiveExamination] ASME Boiler and Pressure Vessel Code, Section Ⅷ volumes of the first pressure vessel [ASMEBoilerandPressureVessel Code (BPVC), SectionⅧ, Division1, RulesforConstructionofPressureVessels] ......

Image

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 21411.1-2014_English be delivered?

Answer: Upon your order, we will start to translate GB/T 21411.1-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 9 ~ 13 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 21411.1-2014_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 21411.1-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 21411.1-2014?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 21411.1-2014 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.