GB/T 20404-2014 English PDF

US$1019.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 20404-2014: Hoists for the transfer of disabled persons -- Requirements and test methods
Status: Valid

GB/T 20404: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 20404-2014	1019	Add to Cart	6 days	Hoists for the transfer of disabled persons -- Requirements and test methods	Valid
GB/T 20404-2006	RFQ	ASK	4 days	Hoists for the transfer of disabled persons -- Requirements and test methods	Obsolete

Similar standards

GB/T 39381.1   YY/T 1680   YY/T 1571   GB/T 20405.5   GB/T 20405.4   GB/T 20405.2   

Basic data

Standard ID: GB/T 20404-2014 (GB/T20404-2014)
Description (Translated English): Hoists for the transfer of disabled persons -- Requirements and test methods
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: C45
Classification of International Standard: 11.180.99
Word Count Estimation: 46,493
Date of Issue: 9/3/2014
Date of Implementation: 1/1/2015
Older Standard (superseded by this standard): GB/T 20404-2006
Regulation (derived from): People's Republic of China Announcement of Newly Approved National Standards No. 21 of 2014
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

GB/T 20404-2014: Hoists for the transfer of disabled persons -- Requirements and test methods

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Hoists for the transfer of disabled persons.Requirements and test methods ICS 11.180.99 C45 National Standards of People's Republic of China Replace GB/T 20404-2006 Displacer requirements and test methods for dysfunction (ISO 10535.2006, IDT) Published on.2014-09-03 2015-01-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China China National Standardization Administration issued

Content

Foreword III Introduction IV 1 Scope 1 2 Normative references 1 3 Terms and Definitions 2 4 General requirements and test methods 7 4.1 General requirements 7 4.2 Overall test method 7 4.3 Safety requirements 11 4.4 Requirements for body support unit 15 4.5 Center Suspension Point 15 4.6 boom 15 4.7 Performance 16 4.8 liter, drop rate (speed) 16 4.9 Operating force (torque) 16 4.10 Durability 17 4.11 Hydraulic components 18 4.12 Pneumatic components 19 4.13 Information provided by the manufacturer 19 5 Specific requirements and test methods for mobile lifts 24 5.1 General requirements 24 5.2 Static strength 24 5.3 Static stability 24 5.4 Fixing device (brake device) 26 5.5 Power 26 5.6 User Manual 26 6 Standing and lifted lifts - Specific requirements and test methods 27 6.1 General requirements 27 6.2 Static strength 27 6.3 Static stability 28 6.4 Fixing device (brake device) 29 6.5 Power 29 6.6 Durability 29 6.7 Instruction Manual 30 7 Fixed lift specific requirements and test methods 30 7.1 General requirements 30 7.2 Specific safety requirements 30 7.3 Static strength (only for self-supporting fixed lifts) 31 7.4 Static stability (only for self-supporting fixed lifts) 31 7.5 Static strength of other fixed lifts 32 7.6 User Manual 32 8 Non-rigid body support unit specific requirements and test methods 32 8.1 General 32 8.2 Material and suture requirements for non-rigid body support units 32 8.3 Test methods for non-rigid body support units 33 8.4 Information provided by the manufacturer 33 9 Hard body support unit specific requirements and test methods 33 9.1 General requirements 33 9.2 Backrest requirements 34 9.3 Durability requirements and test methods 34 9.4 Information provided by the manufacturer 34 10 Bathtub shifters - Specific requirements and test methods 34 10.1 General requirements 34 10.2 General Test Methods 35 10.3 Security Requirements 35 10.4 Body Support Unit 36 10.5 Suspension 36 10.6 Performance 36 10.7 Rate of lift (speed) 36 10.8 Operating force 36 10.9 Durability 36 10.10 Static Strength and Stability 37 10.11 Hydraulic components 37 10.12 Pneumatic components 37 10.13 Specific security requirements 37 10.14 Non-rigid body support unit 37 10.15 Hard Body Support Unit Requirements 38 10.16 Information provided by the manufacturer 38 Appendix A (informative) Structure of GB/T 20404 39 Appendix B (informative) Regular inspection 40

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces GB/T 20404-2006 "Technical requirements and test methods for lifting frames for disabled persons", this standard and The main technical changes compared with GB/T 20404-2006 are as follows. --- Added terms and definitions for bathtub lifts, self-standing fixed lifts, stand-up and/or lift lifts (see 3.5, 3.15, 3.34); --- Added requirements and test methods for bathtub lifts, self-supporting fixed lifts, stand-up and/or lift-type lifts (see section Chapter 10, Chapter 7, Chapter 6). This standard uses the translation method equivalent to ISO 10535.2006 "Diffuser Requirements and Test Methods for Dysfunction Persons". The documents of our country that have a consistent correspondence with the international documents referenced in this standard are as follows. ---GB/T 3768 Acoustic sound pressure method for the determination of noise source sound power level reflection surface above the envelope measurement surface simple method (GB/T 3768-1996, eqvISO 3746.1995); --- GB/T 3785.1 Electroacoustic sound level meter Part 1. Specification (GB/T 3785.1-2010, IEC 61672-1.2002, IDT); ---GB 4208 enclosure protection grade (IP code) (GB 4208-2008, IEC 60529..2001, IDT); ---GB/T 8685 Textile Maintenance Label Specification Symbol Method (GB/T 8685-2008, ISO 3758.2005, MOD); --- GB/T 16886.1 Biological evaluation of medical devices - Part 1. Evaluation and testing in the process of risk management (GB/T 16886.1-2011, ISO 10993-1.2009, IDT); ---GB 17625.1 Electromagnetic compatibility limit harmonic current emission limit (device input current per phase ≤ 16 A) (GB 17625.1-2012, IEC 61000-3-2..2009, IDT); ---GB/T 17626.3 Electromagnetic compatibility test and measurement technology RF electromagnetic field radiation immunity test (GB/T 17626.3- 2006, IEC 61000-4-3.2002, IDT); GB/T 18779.1 Geometrical Product Specifications (GPS) - Measurements - Part 1 Judgment rules for passing or failing inspection (GB/T 18779.1-2002, eqvISO 14253-1.1998); ---YY/T 0316 Medical Device Risk Management for Medical Devices (YY/T 0316-2008, ISO 14971.2007, IDT). Please note that some of the contents of this document may involve patents. The issuing organization of this document is not responsible for identifying these patents. This standard was proposed by the Ministry of Civil Affairs of the People's Republic of China This standard is under the jurisdiction of the National Technical Committee for the Standardization of Rehabilitation and Special Equipment for Persons with Disabilities (SAC/TC148). This standard was drafted. National Rehabilitation Aids Research Center. The main drafters of this standard. Ma Fengling, Li Mingjie, Ji Run, Liu Junling, Zhang Fang. The previous versions of the standards replaced by this standard are. ---GB/T 20404-2006.

Introduction

Studies have shown that caregivers have a heavy physical burden when caring for people with dysfunction. Use a lift to safely help dysfunctional people independently Or complete the shift with the help of a caregiver. Although, according to the normative reference document GB/T 16432-2004 of this standard, the name of this standard shall be "lifting frame for disabled persons" Requirements and Test Methods, but with the release of the revised version of GB/T 16432, the relevant terms of this standard have also been modified accordingly, the term "disability" "People" was changed to "dysfunction" and "lifting frame" was changed to "lifting machine". Displacer requirements and test methods for dysfunction

1 Scope

This standard specifies the requirements and test methods for the dynamometer shifter and its body support unit in GB/T 16432-2004. 123603 Mobile lift with sling 123604 standing mobile lift 123606 mobile lift with hard seat 123609 Lifting trolley 123612 Fixed lift mounted on wall, floor and/or ceiling 123615 Fixed lift that is fixed and placed on another product 123618 fixed self-supporting lift 123621 body support unit for lift This standard does not apply to devices that transport people between floors. This standard does not include methods for determining the ageing or corrosion of lifts and body support units. The requirements of this standard are based on the needs of the dysfunctional person being lifted and the caregiver using the lift.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 16432-2004 Classification and terminology of assistive devices for persons with disabilities (ISO 9999.2002, IDT) ISO 3746 Acoustic sound pressure method for the determination of noise sources Sound power level Reflective surface above the envelope method for measuring the surface (Acous- tics-Determinationofsoundpowerlevelsandsoundenergylevelsofnoisesourcesusingsoundpres- sure-Surveymethodusinganenvelopingmeasurementsurfaceoverareflectingplane) ISO 3758 Textiles-Carelabelingcodeusingsymbols ISO 10993-1 Biological evaluation of medical devices - Part 1. Assessment and testing (Biologicalevaluationofmedical devices-Part 1.Evaluationandtesting) ISO 14253-1 Product Geometrical Specifications (GPS) - Measurement and testing of workpieces and measuring equipment - Part 1 Or unqualified decision rule [GeometricalProductSpecifications(GPS)-Inspectionbymeasurementof workpiecesandmeasuringequipment-Part 1.Decisionrulesforprovingconformanceornon-con- Formancewithspecifications] ISO 14971 Medical Device Risk Management for Medical Devices (Medicaldevices-Applicationofriskma- Nagementtomedicaldevices) IEC 60529 enclosure protection rating (IP code) [Degreesofprotectionprovidedbyenclosures(IPCode)] IEC 60601-1.2006 Medical electrical equipment - Part 1. General requirements for basic safety and basic performance (Medical electricalequipment-Part 1.Generalrequirementsforbasicsafetyandessentialperformance) IEC 60601-1-2.2005 Medical electrical equipment - Part 1-2. Safety general requirements Parallel standard. Electromagnetic compatibility requirements and Test (Medicalelectricalequipment-Part 1-2. Generalrequirementsforsafety-Colateralstandard. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 20404-2014_English be delivered?

Answer: Upon your order, we will start to translate GB/T 20404-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 20404-2014_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 20404-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 20404-2014?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 20404-2014 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.