GB/T 20405.4-2025 English PDFUS$199.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 20405.4-2025: Urine-absorbing aids for incontinence - Polyacrylate superabsorbent powders - Part 4: Test method for the moisture content as weight loss upon heating Status: Valid GB/T 20405.4: Historical versions
Basic dataStandard ID: GB/T 20405.4-2025 (GB/T20405.4-2025)Description (Translated English): Urine-absorbing aids for incontinence - Polyacrylate superabsorbent powders - Part 4: Test method for the moisture content as weight loss upon heating Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: C45 Classification of International Standard: 11.180.20 Word Count Estimation: 10,123 Date of Issue: 2025-01-24 Date of Implementation: 2025-08-01 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 20405.4-2025: Urine-absorbing aids for incontinence - Polyacrylate superabsorbent powders - Part 4: Test method for the moisture content as weight loss upon heating---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. ICS 11.180.20 CCSC45 National Standard of the People's Republic of China Replaces GB/T 20405.4-2006 Urine absorbent for incontinence Polyacrylate highly absorbent powder Part 4.Determination of moisture content by loss on heating Published on January 24, 2025, implemented on August 1, 2025 State Administration for Market Regulation The National Standardization Administration issued ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document is part 4 of GB/T 20405 "Polyacrylate super absorbent powder for urine absorbent for incontinence". GB/T 20405 has been The following parts have been published. --- Part 1.Method for determination of pH value; --- Part 2.Test method for the determination of residual acrylate monomer content; --- Part 3.Test method for particle size distribution by sieving; --- Part 4.Determination of moisture content by loss on heating method; --- Part 5.Determination of water absorption in saline solution by gravimetric method. This document replaces GB/T 20405.4-2006 "Test method for properties of polymer matrix absorbent materials for urine absorbents for incontinence" Compared with GB/T 20405.4-2006, except for structural adjustment and editorial changes, In addition to the above, the main technical changes are as follows. a) Added warnings throughout the text; b) The scope has been changed (see Chapter 1, Chapter 1 of the.2006 edition); c) Added the terms and definitions of sample and specimen (see Chapter 3); d) Added reagents and materials (see Chapter 5); e) Changed the requirements for analytical balance (see 6.1, 4.1 of the.2006 edition), changed the requirements for drying container (see 6.2, 4.2), changed the requirements for electric heating constant temperature heating box (see 6.3, 4.3 of the.2006 edition), changed the requirements for desiccators (see 6.4, 4.4 of the.2006 edition), the requirements for scrapers have been changed (see 6.5, 4.5 of the.2006 edition); f) Added environmental conditions requirements (see Chapter 7); g) Changed the sampling requirements (see Chapter 8, Chapter 5 of the.2006 edition); h) The steps have been changed (see Chapter 9, Chapter 6 of the.2006 edition); i) Changed the reporting requirements (see Chapter 11, Chapter 9 of the.2006 edition); j) The precision has been changed (see Chapter 12, Chapter 8 of the.2006 edition). This document is modified to adopt ISO 17190.4.2020 "Polyacrylate superabsorbent powder for incontinence" Part 4. Determination of moisture content by loss on heating method. The following editorial changes were made to this document. --- In order to coordinate with the existing standards, the name of the standard will be changed to "Polyacrylate Super Absorbent Powder for Incontinence" Part. Determination of moisture content by weight loss on heating"; --- Deleted the relevant content of particulate matter information provided by foreign institutions in Chapter 8; --- Deleted the relevant content of Chapter 12 on the practices of foreign institutions. The technical differences between this document and ISO 17190.4.2020 and their reasons are as follows. --- Deleted the requirements on software and versions used by computers in Chapter 11 to adapt to my country's technical conditions. Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document is issued by the Ministry of Civil Affairs of the People's Republic of China. This document is under the jurisdiction of the National Technical Committee for Standardization of Rehabilitation and Special Equipment for Persons with Disabilities (SAC/TC148). This document was drafted by. China Center for Assistive Devices and Equipment for Persons with Disabilities, Shanghai Yangzhi Rehabilitation Hospital (Shanghai Sunshine Rehabilitation Center), Shaanxi Province Medical Device Quality Inspection Institute, China Rehabilitation Science Institute, Guangdong Worm Testing Technology Service Co., Ltd. The main drafters of this document are. Wang Qi, Yan Mei, Xiu Chunyang, Zhu Rui, Xu Wenfeng, Chen Xiaodong, Wang Yanhui, Li Dongmei, Wu Guoxing, and Dong Hongdan. The previous versions of this document and the documents it replaces are as follows. ---First published in.2006 as GB/T 20405.4-2006; ---This is the first revision.IntroductionPolyacrylate super absorbent powder is a kind of urine absorbent for incontinence. The water content is A characteristic. GB/T 20405 series of test methods are applicable to the detection of polyacrylate highly absorbent powders in sanitary products, including those for incontinence. Materials testing for urine absorption aids. These test methods are designed specifically for testing materials and are not intended for, or applicable to, finished urine absorption aids. Equipment testing. GB/T 20405 is planned to consist of 11 parts. --- Part 1.pH determination method. The purpose is to provide a method for determining the pH value of powdered highly water-absorbent polyacrylates. method. --- Part 2.Test method for determination of residual acrylate monomer content. The purpose is to provide a method for determining the highly absorbent polyacrylic acid powder Test method for residual sodium acrylate and total amount of acrylic acid (expressed as acrylic acid) in --- Part 3.Test method for particle size distribution by sieving. The purpose is to provide a method for measuring particle size not greater than 850 μm Test method for particle size distribution of cross-linked polyacrylate superabsorbent powders. --- Part 4.Determination of moisture content by heating weight loss method. The purpose is to provide a cross-linked polyacrylate highly absorbent powder water Method for determination of thermal mass loss of fraction content. --- Part 5.Determination of water absorption by weighing in saline solution. The purpose is to provide a polyacrylate highly absorbent powder in Method for determination of swelling capacity in saline. --- Part 6.Determination of the saline solution retention rate after centrifugation by weighing method. The purpose is to provide a method for determining the high water absorption of polyacrylate A method to measure the ability of a polymer powder to retain saline solution after centrifugation. --- Part 7.Determination of the amount of liquid absorbed under pressure by weighing method. The purpose is to provide high water absorption of polyacrylates under specific pressure. Method for determination of the absorption of saline solution by powders. --- Part 8.Determination of flow rate by weighing method. The purpose is to provide a method for determining the mass flow rate of polyacrylate superabsorbent powder. --- Part 9.Determination of density by weighing method. The purpose is to provide polyacrylates with high water absorption properties for incontinence urine absorption aids. Method for determination of powder density. --- Part 10.Determination of extractable polymer content by potentiometric titration. The purpose is to provide polyacrylate highly absorbent powder that can be used in salt Method for determination of the mass fraction of carboxylic acid groups of different chain lengths extracted from water. --- Part 11.Determination of inhalable particle content. The purpose is to provide the inhalable particle content of polyacrylate super absorbent powder. Determination method. Urine absorbent for incontinence Polyacrylate highly absorbent powder Part 4.Determination of moisture content by loss on heating Warning---This document does not address any safety issues associated with its use. Users of this document are responsible for conducting appropriate Personnel performing the tests should be adequately trained in all aspects of the procedure.1 ScopeThis document provides a test method for evaluating the mass loss of cross-linked polyacrylate superabsorbent powders upon heating. This document applies to polymeric superabsorbent materials in powder form that are free-flowing under specified test conditions. Substances other than water may interfere with the results and it is the responsibility of the polymer formulator/manufacturer to determine whether such interference exists and Avoid using the method, provide an alternative method, or modify the method accordingly.2 Normative referencesThe contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. ISO 187 Standard atmospheric conditions for the handling and testing of paper, board and pulp specimens and procedures for monitoring atmospheric conditions and sample conditioning Note. GB/T 10739-2023 Standard atmospheric conditions for handling and testing of paper, paperboard and pulp samples (ISO 187.2022, MOD)3 Terms and definitionsThe following terms and definitions apply to this document. 3.1 Sample A product or part of a product extracted from a production batch for testing purposes, which is identifiable and traceable to its origin. 3.2 Sample Identify the portion of the sample (3.1) that is specifically intended for testing.4 GeneralThis procedure determines the mass loss of the test part when it is dehydrated in an electrically heated drying oven at (105±2)℃ under normal pressure.5 Reagents and Materialsnone. ...... |
