GB/T 18779.6-2020 English PDF

US$319.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 18779.6-2020: Geometrical product specifications(GPS). Inspection by measurement of workpieces and measuring equipment - Part 6: Generalized decision rules for the acceptance and rejection of instruments and workpieces
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 18779.6-2020	319	Add to Cart	4 days	Geometrical product specifications(GPS). Inspection by measurement of workpieces and measuring equipment - Part 6: Generalized decision rules for the acceptance and rejection of instruments and workpieces	Valid

Similar standards

GB/T 22092   GB/T 26093   GB/T 22097   GB/T 18779.3   GB/T 18779.2   GB/T 18779.1   

Basic data

Standard ID: GB/T 18779.6-2020 (GB/T18779.6-2020)
Description (Translated English): Geometrical product specifications(GPS). Inspection by measurement of workpieces and measuring equipment - Part 6: Generalized decision rules for the acceptance and rejection of instruments and workpieces
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J42
Classification of International Standard: 17.040.40
Word Count Estimation: 17,193
Date of Issue: 2020-12-14
Date of Implementation: 2021-07-01
Quoted Standard: GB/T 18779.1; GB/T 24634; GB/T 24637.2; JJF 1001; JJF L059.1
Adopted Standard: ISO/TR 14253-6-2012, MOD
Regulation (derived from): National Standard Announcement No. 28 of 2020
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration
Summary: This standard specifies the judgment rules when the default rules of GB/T 18779.1 may not be economically optimal. This standard does not involve how to determine the cost of correct or incorrect judgment ("correct judgment" refers to accepting qualified products or rejecting unqualified products, and "wrong judgment" refers to accepting nonconforming products or rejecting qualified products), because this is Business matters. However, this standard specifies the terminology and requirements required by organizations to communicate and implement specific judgment rules, and it also specifies examples of guiding applications. This standard applies to the measurement and inspection of workpieces and measuring equipment in the product geometric technical specifications, as well as industrial applications.

GB/T 18779.6-2020: Geometrical product specifications(GPS). Inspection by measurement of workpieces and measuring equipment - Part 6: Generalized decision rules for the acceptance and rejection of instruments and workpieces

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Geometrical Product Specifications (GPS) Measurement and Inspection of Workpieces and Measuring Equipment Part 6: General Rules for Acceptance/Rejection of Instruments and Workpieces) ICS 17:040:40 J42 National Standards of People's Republic of China Product Geometric Technical Specification (GPS) Measurement inspection of workpiece and measuring equipment Part 6: Instrument and workpiece acceptance/rejection General rule (ISO /T R14253-6:2012,MOD) Released on 2020-12-14 Implemented on 2021-07-01 State Administration for Market Regulation Issued by the National Standardization Management Committee

Table of contents

Preface Ⅲ Introduction Ⅳ 1 Scope 1 2 Normative references 1 3 Terms and definitions 1 4 Overview 4 5 Judgment rule 5 6 Examples of judgment rules 8 Appendix A (informative appendix) and GPS matrix model relationship 12 Reference 13

Foreword

GB/T 18779 "Geometric Technical Specifications for Products (GPS) Measurement Inspection of Workpieces and Measuring Equipment" is divided into 6 parts: ---Part 1: The rules for determining qualified or unqualified inspections according to specifications; ---Part 2: Guidelines for Evaluation of Uncertainty of GPS Measurement in Measuring Equipment Calibration and Product Inspection; ---Part 3: Guidelines on reaching a consensus on the expression of measurement uncertainty; ---Part 4: The basis for determining the functional limits and specification limits in the rules; ---Part 5: Uncertainty of inspection of indicating measuring instrument; ---Part 6: General rules for acceptance/rejection of instruments and workpieces: This part is Part 6 of GB/T 18779: This section was drafted in accordance with the rules given in GB/T 1:1-2009: This part uses the redrafting method to modify and adopt ISO /T R14253-6:2012 "Geometrical Technical Specifications for Products (GPS) Workpieces and Measurements" Measurement and inspection of equipment: Part 6: General rules for acceptance/rejection of instruments and workpieces:" The technical differences between this part and ISO /T R14253-6:2012 and the reasons are as follows: ---Regarding normative reference documents, this section has made adjustments with technical differences to adapt to my country's technical conditions and adjustments: The situation is collectively reflected in Chapter 2 "Normative Reference Documents", and the specific adjustments are as follows: ● Replace ISO 14253-1 with GB/T 18779:1 which is equivalent to the international standard; ● Replace ISO 14978 with GB/T 24634 equivalent to adopting international standards; ● Replace ISO 17450-2 with GB/T 24637:2 modified to adopt international standards; ● Use JJF1001 instead of ISO /IEC Guide99; ● Use JJF1059:1 instead of ISO /IEC Guide98-3; ---Change the six different judgment rules in the results of 6:2:3 judgment rules to eight different judgment rules; --- In the result of the 6:2:3 determination rule, "that is, loose rejection with infinite width protection band" is changed to "that is, with infinite width protection band: Loosely accept"; --- Change the result of 6:2:3 determination rules, which may cause a large litigation cost (see 6:2:1) to (see 6:2:2); ---In 6:3 process capability index Cp=1, measurement capability index Cm=4, six different judgment rules are changed to eight different judgments Set rules: This section has made the following editorial changes: ---According to the requirements of GB/T 1:1-2009, in the "Scope" chapter, "This part is applicable to the technical specifications of product geometry The measurement inspection of parts and measuring equipment is also applicable in industrial applications:" This part is proposed and managed by the National Standardization Technical Committee for Product Geometric Technical Specifications (SAC/TC240): Drafting organizations of this section: China Aviation Industry Corporation Beijing Great Wall Metrology and Testing Technology Research Institute, Hexagon Measurement Technology (Qingdao) Co:, Ltd:, CMC Productivity Promotion Center, China Institute of Metrology, China Jiliang University: The main drafters of this section: Sun Yujiu, Ming Cuixin, Wang Huizhen, Kong Ming, Wang Zhongning, Wang Weinong, Qian Feng, Zhu Yue:

Introduction

This part of GB/T 18779 is a product geometric technical specification (GPS) standard and a GPS general standard (see GB/T 20308): It affects the measurement, measurement equipment and calibration link in the GPS standard matrix model link: The GPS overall plan in GB/T 20308 summarizes the GPS system, and this part is a part of the system: Unless otherwise stated It is clear that the GPS basic rules given in GB/T 4249 are applicable to this part, and the default rules given in GB/T 18779:1 are applicable in accordance with this part: Developed specifications: For detailed information about the relationship between this part of GB/T 18779 and other standards and the GPS matrix model, see Appendix A: This part is based on the concept of the determination rule GB/T 18779:1, and completes the default rule (a guard band is equal to 100% extended measurement Strict acceptance of certainty) Expansion of terms outside the scope, allowing communication of other possible rules (outside the default rules) to adapt to different industries demand: This part follows the ISO /IEC Guide98-4 guidelines: The judgment rule can determine the position of the judgment limit without affecting the work Poor; they try to solve the (always present) measurement uncertainty problem, and clearly state how the measurement uncertainty will affect acceptance/rejection Accept judgment: The choice of decision rules usually involves designers, measurement personnel and management personnel: The designer can provide relevant size specifications The measurement personnel can provide information on the accuracy of dimensional measurement, and the management personnel can provide different acceptance/rejection options: Economic consequences Information: The choice of judgment rules is only one element of the production work, and other activities will also affect the number of qualified (or unqualified) workpieces, including Poor regulations, choice of manufacturing process, and choice of measurement process; all these issues are interrelated and need to be considered together: Both parties (manufacturers and users) need to discuss and agree to the judgment rule, because it affects the economic benefits of the product: Product Geometric Technical Specification (GPS) Measurement inspection of workpiece and measuring equipment Part 6: Instrument and workpiece acceptance/rejection General rule

1 Scope

This part of GB/T 18779 gives the conditions when the default rules of GB/T 18779:1 may not be economically optimal: Judgment rules: Note 1: GB/T 18779:1 provides a default judgment rule: According to this rule, if the measured value characterizes the acceptance of a product, it has a high probability of Ensure that the corresponding measurement of the product meets the specifications: Note 2: To change the judgment rule from the default rule to a rule for a specific task, the parties concerned need to reach an agreement: This section does not deal with how to determine the cost of correct or incorrect judgment ("correct judgment" means accepting qualified products or rejecting unqualified “Wrong judgment” means accepting unqualified products or rejecting qualified products), because this is a business matter: However, this section gives The required terminology and requirements are used to communicate and implement specific judgment rules, while giving examples of guiding applications: Note 3: The determination rules of this section apply to the single measurement characteristic under consideration: Unless otherwise stated, all probability distributions discussed in this section are Gaussian It is distributed and located in the center, and the cost function is a simple step function: However, the principles of this section can be applied to any probability distribution function or This function: This section applies to the measurement and inspection of workpieces and measuring equipment in product geometric technical specifications, as well as industrial applications:

2 Normative references

The following documents are indispensable for the application of this document: For dated reference documents, only the dated version applies to this article Pieces: For undated references, the latest version (including all amendments) applies to this document: GB/T 18779:1 Technical Specification for Product Geometrical Quantity (GPS) Measurement Inspection of Workpieces and Measuring Equipment Part 1: Inspection According to Specifications Rules for determining qualified or unqualified inspection (GB/T 18779:1-2002, eqvISO 14253-1:1998) GB/T 24634 Product Geometric Technical Specification (GPS) General concepts and requirements for GPS measuring equipment (GB/T 24634-2009, ISO 14978:2006, IDT) GB/T 24637:2 Product Geometric Technical Specification (GPS) General Concepts Part 2: Basic Principles, Specifications, Operational Sets and Uncertainties Fixed degree (GB/T 24637:2-2020, ISO 17450-2:2012, MOD) JJF1001 General measurement terms and definitions JJF1059:1 Evaluation and expression of measurement uncertainty

3 Terms and definitions

GB/T 18779:1, GB/T 24634, GB/T 24637:2, JJF1001, JJF1059:1 and the following terms and definitions are applicable Used in this document: 3:1 Acceptancelimit The upper or lower limit of the allowable measured value: ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 18779.6-2020_English be delivered?

Answer: Upon your order, we will start to translate GB/T 18779.6-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 18779.6-2020_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 18779.6-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.