GB/T 18779.1-2022 English PDFUS$424.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 18779.1-2022: Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications Status: Valid GB/T 18779.1: Historical versions
Basic dataStandard ID: GB/T 18779.1-2022 (GB/T18779.1-2022)Description (Translated English): Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J42 Classification of International Standard: 17.040.40 Word Count Estimation: 23,286 Date of Issue: 2022-10-12 Date of Implementation: 2022-10-12 Older Standard (superseded by this standard): GB/T 18779.1-2002 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 18779.1-2022: Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. ICS 17.040.40 CCSJ42 National Standards of People's Republic of China Replace GB/T 18779.1-2002 Product Geometry Specification (GPS) Measurement and inspection of workpieces and measuring equipment - Part 1. Verification rules for passing or failing according to specifications (ISO 14253-1.2017, IDT) 2022-10-12 release 2022-10-12 implementation State Administration for Market Regulation Released by the National Standardization Management Committee table of contentsPreface III Introduction IV 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Default Judgment Rules 5 5 Pass or fail verification according to specification 9 6 Applications in Supplier-Customer Relationships 12 Appendix A (informative) Relationship between this edition and the previous edition 13 Appendix B (Informative) Relationship with GPS Matrix Model 16 Reference 17forewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules for Standardization Documents" drafting. This document is the first part of GB/T 18779 "Geometric Product Specification (GPS) Measurement and Inspection of Workpieces and Measuring Equipment". GB/T 18779 has published the following parts. --- Part 1.Judgment rules for qualified or unqualified verification according to the specification; --- Part 2.Guidelines for the evaluation of measurement uncertainty in GPS measurement, measurement equipment calibration and product verification; --- Part 3.Guidance on reaching a consensus on the expression of measurement uncertainty; --- Part 4.The basis for determining the functional limits and normative limits in the rules; --- Part 5.Inspection uncertainty of indicating measuring instruments; --- Part 6.General decision rules for acceptance/rejection of instruments and workpieces. This document replaces GB/T 18779.1-2002 "Technical Specification for Product Geometric Quantity (GPS) Measurement and Inspection of Workpieces and Measuring Equipment Part 1 Part. Judgment Rules for Passed or Unqualified Inspection According to Standards, compared with GB/T 18779.1-2002, except for structural adjustments and editorial changes In addition, the main technical changes are as follows. a) The scope of the document has been changed (see Chapter 1, Chapter 1 of the.2002 edition). b) Deleted term. Tolerance limit, tolerance, tolerance zone, maximum allowable error, specification, specification limit, upper specification limit, lower specification limit, measurand, measurement result, Nominal value, measurement uncertainty, standard uncertainty, combined standard uncertainty, expanded uncertainty, inclusion factor, measurement result Complete statement of results, qualified, qualified area, unqualified, unqualified area (see 3.1~3.8, 3.10~3.22 of the.2002 edition). c) Added terms. Pass Probability Limit, Default Pass Probability Limit, Lower Fail Probability, Upper Fail Probability, Fail Probability Limit, Default Fail Probability Restriction, acceptance area, default acceptance area, rejection area, default rejection area (see 3.2~3.11). d) The judgment method has been changed, and the focus of the judgment has been changed from inclusion probability to qualified (or unqualified) probability (see 4.1,.2002 edition 5.1). e) Replace the original default coverage factor k=2 with the default qualified (or unqualified) probability of 95%, so as to ensure the judgment risk of qualified judgment Constant (see 4.2, 4.3, Chapter 4 of the.2002 edition). This document is equivalent to ISO 14253-1.2017 "Geometric Product Specifications (GPS) Measurement and Inspection of Workpieces and Measuring Equipment" Part 1.Judgment rules for passing or failing verification according to the specification. Please note that some contents of this document may refer to patents. The issuing agency of this document assumes no responsibility for identifying patents. This document is proposed and managed by the National Product Geometric Technical Specification Standardization Technical Committee (SAC/TC240). This document is drafted by. China Machinery Productivity Promotion Center Co., Ltd., North Test League (Beijing) Technology Co., Ltd., Zhongyuan Institute of Technology, Zhengzhou University, Beijing Institute of Metrology and Testing Sciences, Anji Asia-Pacific Brake System Co., Ltd., China Machine Research Institute of Standard Technology (Beijing) Co., Ltd. Division, Xugong Group Construction Machinery Co., Ltd., China Aviation Industry Corporation Beijing Aviation Precision Machinery Research Institute, Zhejiang Textile and Garment vocational school. The main drafters of this document. Ming Cuixin, Wu Xun, Zhao Zexiang, Zhao Fengxia, Yue Chunran, Shi Ruikang, Zhu Yue, Song Tianjia, Li Di, Ye Hongwu. This document was first published in.2002, and this is the first revision.IntroductionIn order to reduce disputes between suppliers and customers during the acceptance process of workpieces and measuring equipment, reduce the cost of acceptance, and improve the economic efficiency of products In order to better integrate with international trade rules, the acceptance strategy of workpieces and measuring equipment in my country and the rules for judging whether the acceptance is qualified or not need to be studied urgently. formulate. In order to adapt to my country's reform and opening up situation and to meet the needs of international trade, technology and economic exchanges, GB/T 18779 is equivalent to adopt ISO 14253. GB/T 18779 is a general standard for product geometric technical specifications (GPS) (see GB/T 20308), which affects the chain link of the GPS standard matrix model Conformity and Nonconformity, Measurement, Measuring Equipment and Calibration. GB/T 18779 applies the basic GPS rules given in GB/T 4249; unless otherwise specified, the default judgment rules given in this document then apply to all GPS files. GB/T 18779 mainly expounds the acceptance strategy of workpieces and measuring equipment and the criteria for acceptance or failure in consideration of measurement uncertainty. Acceptance judgment rules, for the convenience of readers, GB/T 18779 is divided into 6 parts. These 6 parts are both interrelated and interrelated Independently, they together constitute the content of the acceptance strategy and qualification determination rules for workpieces and measuring equipment. --- Part 1.Rules for judging whether the verification is qualified or unqualified according to the specification. A strategy for the qualification verification of workpieces or measuring equipment is given; Considering the measurement uncertainty of the measured value, the default criterion for determining whether it is qualified or not is verified according to the GPS specification of the workpiece or measuring equipment. Then; according to the GPS specification verification, the possible handling situations that can neither be judged qualified nor unqualified can be judged. --- Part 2.Guidance for the evaluation of measurement uncertainty in GPS measurements, calibration of measuring equipment, and product verification. it is based on measurement Guide to the Estimation of Measurement Uncertainty in the GPS Field of the Guide to the Expression of Uncertainty (GUM); provides uncertainty management procedures (PUMA) and Practical Iterative Methods for Evaluation of Measurement Uncertainty, and Whether or not a specified target is met in terms of measurement uncertainty UE Requirements for degree of certainty UT (i.e. UE < UT), evaluation of measurement uncertainty, formulation or verification (or both) of measurement procedures (including measurement criteria pieces) etc. --- Part 3.Guidelines for reaching a consensus on the expression of measurement uncertainty. It stipulates that the customer and the supplier solve the measurement uncertainty table It provides a way to solve the disputes in the expression of measurement uncertainty and reach amicable agreement. Consensus methods and specific operating procedures. --- Part 4.The basis for determining the functional limits and normative limits in the rules. Outlines the main assumptions of the decision rules in Part 1 and discusses It explains why these decision rules should be the default rules, and the factors that should be considered before applying different decision rules. --- Part 5.Inspection uncertainty of indicating measuring instruments. It specifies the concepts and terminology for evaluating the uncertainty of detection values, and provides A method for evaluating the uncertainty of detection values of indicating measuring instruments is presented. --- Part 6.General decision rules for acceptance/rejection of instruments and workpieces. Given that when the default decision rule in Part 1 is in the economic Surface is not the best-case decision rule. Product Geometry Specification (GPS) Measurement and inspection of workpieces and measuring equipment - Part 1. Verification rules for passing or failing according to specifications1 ScopeThis document specifies the tolerance for a given workpiece characteristic (or workpiece batch characteristic) or the maximum permissible error for the metrological characteristic of the measuring equipment, including Including the measurement uncertainty to be considered when the measured value is close to the specification limit, and the rules for judging whether the characteristics of the workpiece or measuring equipment are qualified or not. This document applies to the specifications defined in the GPS general standard (see ISO 14638), including. ---Workpiece specification and its batch specification (usually given in the form of upper specification limit, lower specification limit or upper and lower specification limits); --- Measuring equipment specification (usually given in the form of maximum allowable error). This document applies only to characteristics expressed in magnitude and to maximum permissible errors.2 Normative referencesThe contents of the following documents constitute the essential provisions of this document through normative references in the text. Among them, dated references For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document. Part 2.Applied statistics) Note. GB/T 3358.2-2009 Statistics Vocabulary and Symbols Part 2.Applied Statistics (ISO 3534-2.2006, IDT) ulary) Note. GB/T 19000-2016 Quality Management System Basis and Terminology (ISO 9000.2015, IDT) ISO /IEC Guide 98-3 Uncertainty of Measurement Part 3.Guidelines for the Expression of Uncertainty in Measurement (GUM.1995)][Uncer- 1995)] Note. GB/T 27418-2017 Evaluation and Expression of Measurement Uncertainty (ISO /IEC Guide 98-3.2008, MOD) ISO /IEC Guide 98-4 Uncertainty of measurement - Part 4.The role of measurement uncertainty in conformity assessment (Uncertainty3 Terms and DefinitionsAs defined in ISO 3534-2, ISO 9000, ISO /IEC Guide 98-3, ISO /IEC Guide 98-4 and ISO /IEC Guide 99 and The following terms and definitions apply to this document. Note 1.See ISO 3534-1 for the definition of "probability density function (PDF)". Note 2.See ISO 3534-2 for the definitions of "Specification Limit", "Upper Specification Limit (USL)", "Lower Specification Limit (LSL)", "Specified Tolerance" and "Batch Size". Note 3."Maximum allowable measurement error", "measurement uncertainty", "standard measurement uncertainty", "composite standard measurement uncertainty", "inclusion interval" and "inclusion probability" ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 18779.1-2022_English be delivered?Answer: Upon your order, we will start to translate GB/T 18779.1-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 18779.1-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 18779.1-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 18779.1-2022?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 18779.1-2022 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
