GB/T 18430.2-2016 English PDFUS$359.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 18430.2-2016: Water chilling (heat pump) packages using the vapor compression cycle -- Part 2: Water chilling (heat pump) packages for household and similar application Status: Valid GB/T 18430.2: Historical versions
Basic dataStandard ID: GB/T 18430.2-2016 (GB/T18430.2-2016)Description (Translated English): Water chilling (heat pump) packages using the vapor compression cycle -- Part 2: Water chilling (heat pump) packages for household and similar application Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J73 Classification of International Standard: 27.200 Word Count Estimation: 18,167 Date of Issue: 2016-12-13 Date of Implementation: 2017-07-01 Older Standard (superseded by this standard): GB/T 18430.2-2008 Regulation (derived from): National Standard Notice No.100 of 2016 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China GB/T 18430.2-2016: Water chilling (heat pump) packages using the vapor compression cycle -- Part 2: Water chilling (heat pump) packages for household and similar application---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Water chilling (heat pump) packages using the vapor compression cycle - Part 2. Water chilling (heat pump) packages for household and similar application ICS 27.200 J73 National Standards of People's Republic of China Replace GB/T 18430.2-2008 Steam compression cycle cold water (heat pump) unit Part 2. household and similar use Cold water (heat pump) unit Waterchiling (heatpump) packagesusingthevaporcompressioncycle- Part 2. Waterchiling (heatpump) packagesforhouseholdand 2016-12-13 released 2017-07-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People 's Republic of China China National Standardization Management Committee released Directory Preface I 1 Scope 1 2 normative reference document 1 3 Terms and definitions 1 4 type and basic parameters 2 5 requirements 4 Test Method 8 7 Inspection rules 11 8 mark, packaging and storage 12 Appendix A (informative) Partial Load Performance Coefficient Calculation Example 15 ForewordGB/T 18430 "steam compression cycle cold water (heat pump) unit" is divided into two parts. - Part 1. cold water (heat pump) units for industrial or commercial and similar purposes; - Part 2. Cold water (heat pump) units for household and similar purposes. This part is part 2 of GB/T 18430. This part is drafted in accordance with the rules given in GB/T 1.1-2009. Replacement of GB/T 18430.2-2008 "Steam Compressed Circulating Cold Water (Heat Pump) Units Part 2. Household and Similar Uses Cold water (heat pump) unit ". This part of the main technical content compared with GB/T 18430.2-2008 changes are as follows. --- the definition of "nominal operating performance factor" has been eliminated; the definition of "performance factor" has been added; --- modified "Table 1 temperature conditions when the conditions of the conditions/flow conditions, Table 2 part of the load conditions, Table 4 unit design temperature/flow conditions" Part of the expression; - Table 2 adds to the calculation of other load points; --- "4.3 type of cooling performance coefficient" in "4 type and basic parameters" is canceled; - Added "limited coefficient requirements" for "performance factor" and "integrated partial load performance factor" in "5 request" --- "5.7 safety performance" and "6.3.8 safety performance" are canceled, and "5.2 safety requirements" are added. --- canceled the "5.8 warranty period" requirements; --- modified "6.1 measuring instrument accuracy and measurement requirements", canceled the "6.3.11 test report" requirements; - increased requirements for the use of flammable refrigerants; An example of the calculation of the partial load performance factor for Appendix A has been modified. This standard is proposed by the China Machinery Industry Federation. This standard is national standardization of refrigeration and air conditioning equipment Technical Committee (SAC/TC238). This standard is responsible for drafting units. Hefei General Machinery Research Institute, Shenzhen McQuay Air Conditioning Co., Ltd., Hefei General Environmental Control Technology Limited liability company, Hefei General Mechanical and Electrical Products Testing Institute Co., Ltd. This standard participates in the drafting unit. Ningbo Oaks Electric Co., Ltd., Qingdao Hisense Hitachi Air Conditioning System Co., Ltd., Nanjing days plus air conditioning Equipment Limited. The main drafters of this standard. Shi Min, Pan Likui, Zhang Xiuping, Zhong Yu, Qi Shufang, Tu Qiu, Meng Jianjun, Liang Lujun, Xia Linfeng, Wu Junfeng. This standard replaced the previous version of the standard release. --- GB/T 18430.2-2008. Steam compression cycle cold water (heat pump) unit Part 2. household and similar use Cold water (heat pump) unit1 ScopeThis part of GB/T 18430 specifies the use of steam-driven refrigeration cycles for motor-driven refrigeration for household and similar purposes (heat (Hereinafter referred to as "unit") terms and definitions, type and basic parameters, requirements, test, inspection rules, marking, packaging and storage. This part is applicable to cold water (heat pump) units for household and similar purposes with a cooling capacity of not more than 50kW.2 normative reference documentsThe following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document. GB/T 2423.17 Environmental testing for electric and electronic products - Part 2. Test methods Test Ka. Salt mist GB 2894-2008 Safety signs and guidelines for their use GB 4706.32-2012 Safety of household and similar electrical appliances - Particular requirements for heat pumps, air conditioners and dehumidifiers Safety requirements for mechanical refrigeration systems for refrigeration and heating GB 9237 Test method for performance of steam compression cycle cold water (heat pump) units GB/T 10870-2014 GB/T 13306 signs General specification for packaging of electromechanical products GB/T 13384 Vapor compression cycle cold water (heat pump) units - Part 1. Cold for industrial or commercial use and similar purposes GB/T 18430.1-2007 Water (heat pump) unit Energy Efficiency Limits and Energy Efficiency Levels of GB 19577 Chillers GB 25131 steam compression cycle cold water (heat pump) unit safety requirements Determination of noise in refrigeration and air - conditioning equipment GB/T 4330-1999 JB/T 7249 refrigeration equipment terminology3 terms and definitionsJB/T 7249 and the following terms and definitions are applicable to this document. 3.1 Coefficient of performance coefficientofperformance; COP The ratio of the unit cooling (heat) to the total power consumption of the unit under the specified cooling (heat) capacity test conditions. Note. The value is expressed in kW/kW. 3.2 Integrated part load performance coefficient integratedpartloadvalue; IPLV The partial load efficiency index of the chillers for air conditioning, expressed in a single numerical value, is based on the IPLV conditions specified in Table 2 The coefficient of performance of the part load of the unit is obtained by the formula (1) according to the weighting factor of the running time of the unit under various loads. IPLV (or NPLV) = 2.3% × A 41.5% × B 46.1% × C 10.1% × D (1) Where. A --- 100% load when the cooling performance coefficient COP; ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 18430.2-2016_English be delivered?Answer: Upon your order, we will start to translate GB/T 18430.2-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 18430.2-2016_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 18430.2-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 18430.2-2016?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 18430.2-2016 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
