GB/T 17557-2010 English PDFUS$234.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 17557-2010: Insulating materials for shipboard and offshore units, power, control, instrumentation, telecommunication and data cables Status: Valid GB/T 17557: Historical versions
Basic dataStandard ID: GB/T 17557-2010 (GB/T17557-2010)Description (Translated English): Insulating materials for shipboard and offshore units, power, control, instrumentation, telecommunication and data cables Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: U05 Classification of International Standard: 47.020.05 Word Count Estimation: 12,193 Date of Issue: 2010-09-02 Date of Implementation: 2011-02-01 Older Standard (superseded by this standard): GB/T 17557-1998 Quoted Standard: GB/T 2951.11-2008; GB/T 2951.12-2008; GB/T 2951.14-2008; GB/T 2951.21-2008; GB/T 2951.31-2008; GB/T 2951.32-2008; ISO 48; IEC 60502-1-1997; IEC 60754-2 Adopted Standard: IEC 60092-351-2004, IDT Regulation (derived from): National Standard Approval Announcement 2010 No.4 (Total No.159) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the ship, fixed and mobile offshore units with power, control, instruments, electrical performance data communications and cable insulation materials, mechanical properties and specific performance requirements. GB/T 17557-2010: Insulating materials for shipboard and offshore units, power, control, instrumentation, telecommunication and data cables---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Insulating materials for shipboard and offshore units, power, control, instrumentation, telecommunication and data cables ICS 47.020.05 U05 National Standards of People's Republic of China Replacing GB/T 17557-1998 Ships, offshore units power, control, instrumentation, Data communications and cable insulation material Insulatingmaterialsforshipboardandoffshoreunits, power, control, instrumentation, telecommunicationanddatacables (IEC 60092-351.2004, Electricalinstalationsinships- Part 351. Insulatingmaterialsforshipboardandoffshoreunits, power, control, instrumentation, telecommunicationanddatacables, IDT) Issued on. 2010-09-02 2011-02-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard is identical with IEC 60092-351.2004 "marine electrical equipment Part 351. ships, offshore units power, control, Instrumentation, data communications and cable insulation material "(English version). This standard is equivalent translation IEC 60092-351.2004. For ease of use, this standard made the following editorial changes. "." A) with a decimal point instead of IEC 60092-351.2004 as a decimal point, ""; b) Remove the IEC 60092-351.2004 Foreword; c) "IEC 60092 this part" to "this standard"; d) For IEC 60092-351.2004 international standard references, there is tantamount to the adoption of a standard as part of this country with reference Standard instead of an international standard, and the rest is not tantamount to the adoption of the standard, in the standard are a direct reference. e) IEC 60092-351.2004 Normative documents in IEC 60811-1-2.1995 Year of error, to IEC 60811-1- 2. 1985; f) The latest version of the legend undated reference standard footnote "1)", "2)" description; g) For ease of viewing, increased the number in Tables 3 and 4; h) IEC 60092-351.2004 Table 3 "have the copper conductors aging" in the upper right corner missing footnote "a", to supplement this standard; i) Fact Sheet 4 for both high temperature pressure test load time footnote "3)", "4)" will be described. This standard replaces GB/T 17557-1998 "marine power cable insulation material." This standard 17557-1998 major changes compared to GB/T as follows. a) a thermoplastic material, code-named "PVC/A" to "PVC". b) elastomeric or thermosetting material increased 6 kinds. HEPR, HFEPR, HFHEPR, HFXLPE, HFS95, HF90. c) the maximum normal operating temperature of the conductor allowable changes. from 60 ℃ rose to 70 ℃, EPR and XLPE by a PVC 85 ℃ raised to 90 ℃. d) establishes the maximum temperature at S95 short circuit conductor allowed. e) air box divided into non-aging aging conductor and copper conductor aging categories, mechanical performance requirements of the original air box included first after aging Class requirements. f) Special Features. --- PVC when the high temperature pressure test, in both cases the load time from the "outside diameter of the sample d≤12.5mm", "outer diameter of the sample d > 12.5mm "were replaced by" The first one kind of situation "and" the second state of affairs "and annotation; --- The thermal expansion test, XLPE maximum permanent elongation rate of 25% reduction of 15%, S95 of the test temperature (200 ± 3) ℃ was raised to (250 ± 3) ℃; Deviation --- resistance to cracking in the test temperature is increased to ± 2 ℃ ± 3 ℃; --- Low temperature performance of the test temperature deviation increase requirements ± 2 ℃; --- Increased acidity, hardness and modulus of elasticity of demand. g) added three appendices. The Standard Annexes A and B are normative appendix Appendix C is informative appendix. The standard proposed by China Shipbuilding Industry Corporation. This standard by the National Standardization Technical Committee Marine Boats (SAC/TC12) centralized. This standard was drafted. China Shipbuilding Industry Corporation seventh THOUSAND AND FORTY Institute, Jiangsu Ocean Dongze Cable Group Co., Ltd., Changzhou Eight benefits of cable Limited. The main drafters. Zhang Haiyan, Le Yi, Lu Yunchun, LI Yong-jiang, Ni Junan, Syria Zhou Yuan, Xia Yong Nan. This standard was first released in November 1998. Ships, offshore units power, control, instrumentation, Data communications and cable insulation material1 ScopeThis standard specifies the electrical ships, fixed and mobile offshore units power, control, instrumentation, data communications and cable insulation materials Properties, mechanical properties and special performance requirements.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 2951.11-2008 cable and the cable Common test methods for insulating and sheathing materials - Part 11. General test method thick Degree and dimensions measuring mechanical tests (IEC 60811-1-1.2001, IDT) GB/T 2951.12-2008 cable and the cable Common test methods for insulating and sheathing materials - Part 12. General test methods for hot Aging methods (IEC 60811-1-2. 1985, IDT) GB/T 2951.14-2008 cable and the cable Common test methods for insulating and sheathing materials - Part 14. General test methods for low Temperature tests (IEC 60811-1-4. 1985, IDT) GB/T 2951.21-2008 cable and the cable Common test methods for insulating and sheathing materials - Part 21. elastomeric compounds designed Ozone Test Test Test Method for Thermal extending mineral oil immersion tests (IEC 60811-2-1.2001, IDT) GB/T 2951.31-2008 cable and the cable Common test methods for insulating and sheathing materials - Part 31. Polyvinyl chloride mixture Methods specific high temperature pressure test for resistance to cracking (IEC 60811-3-1. 1985, IDT) GB/T 2951.32-2008 cable and the cable Common test methods for insulating and sheathing materials - Part 32. Polyvinyl chloride mixture Methods specific weight loss test - Thermal stability test (IEC 60811-3-2. 1985, IDT) ISO 48 Rubber, vulcanized or thermoplastic - Determination of hardness (hardness 10IRHD ~ 100IRHD) 1) IEC 60502-1.1997 Rated voltage 1kV (Um = 1.2kV) to 30kV (Um = 36kV) power cables with extruded insulation and enclosure Member - Part 1. Rated voltage 1kV (Um = 1.2kV) and 3kV (Um = 3.6kV) cable Gases evolved during combustion cables IEC 60754-2 test methods - Part 2. by measuring pH and conductivity measurement is taken from the electrical Material combustion gases released cable acidity 2) 1) ISO 48 current version of ISO 48.2007 and 2009 Corrigendum 1 single. 2) IEC 60754-2 current version of IEC 60754-2.1991 and 1997 amendments 1.3 of insulating material3.1 General The maximum temperature insulation mixture type, code, when the normal operation and short circuit conductors permitted by this standard are shown in Table 1. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 17557-2010_English be delivered?Answer: Upon your order, we will start to translate GB/T 17557-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 17557-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 17557-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 17557-2010?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 17557-2010 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
