GB/T 17215.911-2011 English PDF

US$274.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 17215.911-2011: Electricity metering equipment -- Dependability -- Part 11: General concepts
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 17215.911-2011	274	Add to Cart	3 days	Electricity metering equipment -- Dependability -- Part 11: General concepts	Valid

Similar standards

GB/T 15284   GB/T 17215.321   GB/T 34067.2   GB/T 17215.241   GB/T 17215.301   GB/T 17215.302   

Basic data

Standard ID: GB/T 17215.911-2011 (GB/T17215.911-2011)
Description (Translated English): Electricity metering equipment -- Dependability -- Part 11: General concepts
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: N22
Classification of International Standard: 17.220.20
Word Count Estimation: 14,124
Date of Issue: 2011-07-29
Date of Implementation: 2011-12-01
Quoted Standard: GB/T 2900.13-2008; IEC 60300-3-2-1993; IEC/TR 62051-1999; IEC 62059-21
Adopted Standard: IECTR 62059-11-2002, IDT
Regulation (derived from): Announcement of Newly Approved National Standards No. 12 of 2011
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the electrical measurement and load control for stationary measuring equipment (hereinafter referred to as measuring equipment) the general problem of credibility and the credibility of management includes all parties involved in the role. This section applies to product life cycle approach and other information.

GB/T 17215.911-2011: Electricity metering equipment -- Dependability -- Part 11: General concepts

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Electricity metering equipment Dependability Part 11. General concepts ICS 17.220.20 N22 National Standards of People's Republic of China Electrical measuring equipment credibility Part 11. General concepts Part 11. Generalconcepts (IEC /T R62059-11.2002, IDT) Issued on. 2011-07-29 2011-12-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Introduction Ⅲ Introduction Ⅳ 1 Scope 1 2 Normative references 1 3 Terms and definitions The basic concept of the credibility of the management of 4 and 3 5 Dependability management role in related parties 5 Usability Appendix A (informative) user side electrical measuring equipment 7 Appendix NA (Informative Appendix) GB/T 17215 series of standards numbering naming and description 8

Foreword

GB/T 17215 in the "credibility of the electrical measuring equipment" to be covered by the following components. --- Part 11. General concepts (IEC 62059-11); --- Part 21. Field data collection instruments credibility (IEC 62059-21); The first part --- 31-1. temperature and humidity accelerated reliability test (IEC 62059-31-1); --- Part 32-1. accelerated endurance test (IEC 62059-32-1); --- Part 41. Reliability prediction (IEC 62059-41); --- Part 51. Software dependability (IEC 62059-51). This is Part 11. This section drafted in accordance with GB/T 1.1-2009 given rules. This section uses the translation method is equivalent to using IEC /T R62059-11.2002 "credibility electrical measuring equipment - Part 11. General Overview Read "(in English). For ease of use, this section made the following editorial changes. a) instead of as a decimal by decimal comma ",". ","; b) "IEC 62059 Part of this" word, the words "this section"; c) modify the terms 3.14 English "meantimebetweenfailures" d) Remove the IEC /T R62059-11.2002 Foreword; e) Added Appendix NA. GB/T 17215 series of standards numbering naming and description. Please note that some of the content of this document may involve patents. Release mechanism of the present document does not assume responsibility for the identification of these patents. This part is proposed by China Machinery Industry Federation. This part of the National Electrical Instrument Standardization Technical Committee (SAC/TC104) centralized. The drafting of this section. Harbin Electrical Instrument Research Institute, Chongqing Electric Power Test & Research Institute, North China Electric Power Research Institute, Jiangsu Provincial Institute of Metrology, Shanghai EF Electronics Technology Co., Ltd., Shenzhen Clou Electronics Technology Co., Ltd. Holley Metering Co., Ltd., Hangzhou PAX Electronic Technology Co., Ltd., Xi'an flags Electronics Co., Ltd. Wei Sheng Group Co., Ltd., Chint Instrument Limited liability company, Ningbo Sanxing Electric Co., Ltd., Jiangsu Caio million Hong Electronics Co., Ltd., Shenzhen Aerospace Electronics Co., Terry, Czech Republic the company. The main drafters of this section. Paul Cheng, Hou Xingzhe, Chenke Chang Sit Jin, Wang Huiwu, Shao Fengyun, Wang Yu, Zhou holes are, Leihui Bo, high technology fields, Chen Hongbo, Shengquan roots, Hu Ning, Zhou Zhongxiang, Li Xianhuai, Wang Sitong, Li Xiangfeng, Dao-liter, mangrove wish, Yao this ceremony, Xu Maolin, Hong Yuan stretch, Li Yifei.

Introduction

Currently in the world, the use of electrical measuring equipment from electromechanical to static transition, in this new measurement technology is required to make Reliability with the latest research results. When it is desired measuring equipment unattended in the long run the state, the reliability is especially important. More than a century of experience in the development and manufacture of electromechanical meters and still not be fully applicable to the instrument, because it presents a two designs Different failure modes. It is for this reason, the National Electrical Instrument Standardization Technical Committee has set up a working group to study currently available The applicability of the standard static electrical measurement equipment credibility. A more important reason for this decision is that the current type of identification and verification Income verification test procedure does not apply to static electric measuring device to determine the performance indicators, designed to stop the use of the entire life cycle reliability. The work plan includes the credibility of the management of field failure data collection and analysis, reliability testing, and failure rate prediction software Credibility problems. Any device's credibility depends on many factors, such as its functionality, complexity, design, manufacturing process, failure criteria, working conditions, so With time, installation and maintenance procedures. Some of these factors are controlled by the manufacturer, while others are equipment operators and users responsibility Any. For this reason, there is no specific definition of reliability and availability requirements, these requirements should be left between the involved parties Consultations. Electrical measuring equipment credibility Part 11. General concepts

1 Scope

This section GB/T 17215 regulations for electrical measurement and control static load measuring device (hereinafter referred to as measuring device) Trusted General problem in nature, and includes the role of the credibility of the parties involved in the management. This section applies to the whole product life cycle within a method of information.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 2900.13-2008 Electrotechnical terminology credibility and quality of service (IEC 60050 (191).1990, Amend.1.1999 AndAmend.2.2002, IDT) IEC 60300-3-2.1993 Dependability management - Part 3. Application guide - Section 2. Trusted data collection site (Depend- abilitymanagement-Part 3. Applicationguide-Section2. Colectionofdependabilitydatafromthe field) IEC /T R62051.1999 Electricity metering glossary (Electricitymetering.Glossaryofterms) IEC 62059-21 Part 21 electrical measuring devices credibility. the credibility of the field instrument data collection (Electricity meteringequipment-Dependability-Part 21. Colectionofmeterdependabilitydatafromthefield)

3 Terms and Definitions

GB/T 2900.13-2008 and IEC /T R62051.1999 as defined in the following terms and definitions apply to this document. 3.1 Availability availability In external resources have the required prerequisite products in the given conditions and at a given time or time interval is able to fulfill the request Ability functional status. [IEV-191-02-05] 3.2 Category category Having the same properties for a class or a set of objects. 3.3 Category classification Systematically into different categories; or according to one or more classification factors, the sample or product into different categories. 3.4 Credibility dependability A collective term used to denote the availability and its influencing factors. reliability, maintainability, supportability. Note. only for the credibility of the non-quantitative terms of a general description. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 17215.911-2011_English be delivered?

Answer: Upon your order, we will start to translate GB/T 17215.911-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 17215.911-2011_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 17215.911-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.