GB/T 17215.322-2008 English PDF

US$599.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 17215.322-2008: Electricity metering equipment (a.c.) -- Particular requirements -- Part 22: Static meters for active energy (classes 0, 2 S and 0, 5 S)
Status: Obsolete

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 17215.322-2008	599	Add to Cart	3 days	Electricity metering equipment (a.c.) -- Particular requirements -- Part 22: Static meters for active energy (classes 0, 2 S and 0, 5 S)	Obsolete

Similar standards

GB/T 15284   GB/T 17215.321   GB/T 34067.2   GB/T 17215.302   GB/T 17215.303   GB/T 17215.324   

Basic data

Standard ID: GB/T 17215.322-2008 (GB/T17215.322-2008)
Description (Translated English): Electricity metering equipment (a.c.) -- Particular requirements -- Part 22: Static meters for active energy (classes 0, 2 S and 0, 5 S)
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: N22
Classification of International Standard: 17.220.20
Word Count Estimation: 15,199
Date of Issue: 2008-06-30
Date of Implementation: 2009-01-01
Older Standard (superseded by this standard): GB/T 17883-1999
Quoted Standard: GB/T 1208.1-2006; GB/T 11150-2001; GB/T 17215.211-2006; IEC 62053-61-1998
Adopted Standard: IEC 62053-22-2003, IDT
Regulation (derived from): Announcement of Newly Approved National Standards No. 11 of 2008 (No. 124 overall)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard applies to the network at 50Hz or 60Hz AC active energy measurement, accuracy class 0. 2S and 0. 5S of the newly created Static meters for active energy meter, and is only applicable to the type testing. This part is suitable for indoor use, and consists of a measuring element and one or more counters and mounted inside the case of the transformer in the same type of access static energy meter. It also applies to one or more work indicators and one or more test output. If the meter has a measurement of more than one energy measurement devices, or other functional units, such as the maximum demand indicators, electronic tariff registers, time switches, ripple control receivers, data communication interfaces encapsulated in the same case, the functions of these units for the appropriate standard.

GB/T 17215.322-2008: Electricity metering equipment (a.c.) -- Particular requirements -- Part 22: Static meters for active energy (classes 0, 2 S and 0, 5 S)

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Electricity metering equipment (ac) Particular requirements Part 22. Static meters for active energy (classes 0, 2 S and 0, 5 S) ICS 17.220.20 N22 National Standards of People's Republic of China GB/T 17215.322-2008/IEC 62053-22.2003 Replacing GB/T 17883-1999 AC measuring equipment - Specific requirements Part 22. Static meters for active energy (0.2S and 0.5S grade level) (IEC 62053-22.2003, IDT) Posted 2008-06-30 2009-01-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Preface Ⅰ Introduction Ⅱ 1 Scope 1 2 Normative references 1 3 Terms and definitions Capacity value as a standard 4 5 2 mechanical requirements 2 6 climatic conditions 2 7 Electrical requirements Power consumption 2 7.1 7.2 Short-term impact of the current 2 7.3 Influence of self heating 2 7.4 AC voltage test 3 8 accuracy requirements 3 Error limits the amount of change due to the current 8.1 3 8.2 Error limit the amount of impact caused by other 4 8.3 starting and creeping test 6 8.4 Meter constant 6 8.5 Accuracy test conditions 6 Finishing 8.6 7 test results Appendix A (normative) Test Line harmonics Figure 8 Appendix B (normative) Test external magnetic field electromagnet 10 Figure A. 1 test circuit in Figure 8 Figure A. 2 burst trigger waveform 9 Figure A. 3 harmonic distribution (incomplete Fourier analysis) 9 Table 1 Power consumption (including power supply) 2 Table 2 since the amount of change due to heat 2 Table 3 AC voltage test 3 Table 4 percentage error limits (single-phase meters and polyphase meter with balanced load) 3 Table 5 percentage error limit (with a multiphase meter, line voltage applied load balancing single-phase multiphase voltage) 4 Table 6 Effect of the amount of 4 Table 7 Voltage and current balance 6 Table 8 reference conditions 7 The test results in Table 9 finishing 7 GB/T 17215.322-2008/IEC 62053-22.2003

Foreword

This section identical with IEC 62053-22.2003 "AC measuring equipment - Specific requirements Part 22. Static meters for active energy (0.2S and 0.5S grade level). " This portion of the GB/T 17215.211-2006 "AC measuring equipment General requirements, tests and test strips Member Part 11. Measuring Device "together constitute a class 0.2S and 0.5S level static active energy meter type test requirements. This Part replaces GB/T 17883-1999. This portion of the GB/T 17883-1999 main difference is as follows. --- Short time current. defined the scope of the test current from 0 to 10% of terms and definitions; --- Electromagnetic compatibility test. a high-frequency electromagnetic field immunity test frequency range widened to 80MHz ~ 2000MHz, the current line No current situation of strong end to 30V/m; fast transient burst test requirements in line with the rated current of the current situation IEC 62059-21.2002 AC measuring equipment reliability - Part 21. Field data collection instrument reliability. This part of the standard meter type test. It covers the special requirements of indoor instruments, but does not include specific components (such as. independence Measuring means within the housing and/or display). This section should be used in conjunction with the GB/T 17215.211. Any requirement in this section relates to Ruoyi included in GB/T 17215.211 In this section take precedence over the requirements of GB/T 17215.211 requirements. This part distinction. --- Accuracy class 0.2S and 0.5S index instruments; --- Ⅰ class protection instrumentation and Ⅱ class protection instrumentation; --- Equipped or not equipped with a ground fault suppression of power line use of the instrument. This test level is seen as offering the lowest value of all instrument functions under nominal operating conditions. For special applications, it may be necessary His test levels shall be agreed between the user and the manufacturer. GB/T 17215.322-2008/IEC 62053-22.2003 AC measuring equipment - Specific requirements Part 22. Static meters for active energy (0.2S and 0.5S grade level)

1 Scope

GB/T 17215 in this section applies only to 50Hz or 60Hz AC active energy measuring network, accuracy rating 0.2S and 0.5S of newly manufactured static meters for active energy, and only applicable to their type testing. This section is intended for indoor use, consisting of a measuring element and one or more counters and packed in the same case the access type transformer The static energy meter. It also applies to one or more work or more indicators and a test output. If you have a meter for Measuring more than one power measuring device (multi-power meter), or other functional units, such as maximum demand indicators, electronic tariff registers, time Between switches, ripple control receivers, data communication interfaces, etc. enclosed in the same case, the functional unit is adapted to these respective standards. Note. GB/T 1208.1-2006 defines the measuring range 0.01In to 1.2In, or 0.05In to 1.5In, or transformers to 2In and accuracy of 0.05In Class 0.2S and 0.5S measuring range 0.01In to 1.2In transformer. Since the measurement range of the instrument transformers must be used in conjunction therewith match Distribution, and only class 0.2S and 0.5S of this standard instrument transformer that has the work required accuracy requirements, and therefore the measurement range of the instrument As 0.01In to 1.2In. This section does not apply to. a) connection jumper terminal voltage exceeds 600V (polyphase meter of line to line voltage) Active Energy Meter; b) portable instrumentation and outdoor instruments; c) instrument counters and data interface; d) standard table. Note. The reliability required by the IEC 62059 series of documents.

2 Normative references

The following documents contain provisions which, through reference GB/T 17215 in this section constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 1208.1-2006 instrument transformers - Part 1. Current transformers (IEC 60044-1.1996, IDT) GB/T 11150-2001 energy meter testing device. Meter test equipment (neqIEC 60736. 1982) GB/T 17215.211-2006 AC measuring equipment General requirements, tests and test conditions Part 11. measuring equipment (IEC 62052-11.2002, IDT) IEC 62053-61.1998 Power consumption and voltage requirements

3 Terms and Definitions

GB/T 17215.211-2006 terms and definitions apply to this section.

4 standard power value

GB/T 17215.211-2006 specified power value applicable to this section. GB/T 17215.322-2008/IEC 62053-22.2003 ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 17215.322-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 17215.322-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 17215.322-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 17215.322-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.