GB/T 16178-2011 English PDFUS$229.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 16178-2011: Safety examinations and technical requirements for powered vehicles on the place used for a particular purpose Status: Valid GB/T 16178: Historical versions
Basic dataStandard ID: GB/T 16178-2011 (GB/T16178-2011)Description (Translated English): Safety examinations and technical requirements for powered vehicles on the place used for a particular purpose Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: C68 Classification of International Standard: 43.020 Word Count Estimation: 10,183 Date of Issue: 2011-11-21 Date of Implementation: 2012-05-01 Older Standard (superseded by this standard): GB/T 16178-1996 Quoted Standard: GB 4599; GB 9656; GB 15084; GB/T 18849 Regulation (derived from): Announcement of Newly Approved National Standards No. 18 of 2011 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the field (plant) within the motor vehicle safety and technical conditions for the use of inspection requirements. This standard applies in our field (plant) within the area of ??driving or engaging in production operations of motor vehicles. This standard does not apply to military, public security, agricultural sector management vehicles. GB/T 16178-2011: Safety examinations and technical requirements for powered vehicles on the place used for a particular purpose---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Safety examinations and technical requirements for powered vehicles on the place used for a particular purpose ICS 43.020 C68 National Standards of People's Republic of China Replacing GB/T 16178-1996 Technical requirements for safety inspection of motor vehicles in field (plant) 2011-11-21 release 2012-05-01 Implementation General Administration of Quality Supervision, Inspection and Quarantine of the People 's Republic of China China National Standardization Management Committee released ForewordThis standard is drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces GB/T 16178-1996 "Technical requirements for safety inspection of motor vehicles in the factory". This standard compared with GB/T 16178-1996, the main changes are as follows. - Added Chapter 3 "Terms and Definitions"; --- removed the previous "3.1 ~ 3.14" of the "vehicle classification"; --- increased "5.3.7", "after the release of the accelerator pedal, should ensure that it can automatically reset."; --- increased "5.6.3", "the driving brake in the first time to take the braking measures should be able to achieve maximum braking performance."; --- Added "5.6.9", "After releasing the brake pedal, the brake system should be fully released." --- increased the "5.6.10", "crawler-type car in a flat and solid soil pavement, slope of 20% of the ramp, should be normal Start and travel; the implementation of parking brake, the braking distance should not be greater than the track grounding length. "; --- "5.6.13", "parking brake device in the ramp test, the functional requirements should meet the relevant standards set"; --- increased "5.7.1.2", "headlight beam irradiation position should remain stable; with far, near light conversion device headlamp light should be In line with the relevant requirements of GB 7258 "; --- Added "5.7.1.3", "the vehicle with the work light set, the driver should be able to see the work of the situation." --- "6.1.2", "forklift working device"; --- Added "6.2", "hydraulic system". This standard is proposed by the State Administration of Quality Supervision, Inspection and Quarantine. This standard by the State Administration of Quality Supervision, Inspection and Quarantine Special Equipment Safety Supervision Bureau. This standard drafting unit. Wenzhou City, Zhejiang Province special equipment testing center. The main drafters of this standard. Jiang Lanhua, Zheng Xiaowou, Hu Sufeng, Pan Hui, Su Lipeng, Yang Yong, Lian Fengwu, Huang Changjiang, Jin Changmin, Mao Fang hold. This standard replaced the previous version of the standard release. --- GB/T 16178-1996. Technical requirements for safety inspection of motor vehicles in field (plant)1 ScopeThis standard specifies the inspection requirements of the safety technology in the use of motor vehicles (hereinafter referred to as vehicles) in the field. This standard applies to the presence of (factory) within the driving or engaged in production operations of motor vehicles. This standard does not apply to the military, public security, agricultural sector management of motor vehicles. Note. The main technical content of this standard does not involve the design and manufacture of the vehicle technical requirements.2 normative reference documentsThe following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document. GB 4599 automotive headlamps with light performance GB 9656 automotive safety glass Performance and installation requirements for rearview mirrors for motor vehicles Performance and part strength of brakes for motorized industrial vehicles GB/T3 terms and definitionsThe following terms and definitions apply to this document. 3.1 Field (factory) motor vehicle poweredvehiclesontheplaceusedforaparticularpurpose In addition to troops, road traffic, agricultural vehicles, driven by the power plant or traction only in the business premises, factory sites, tourist attractions, Recreational areas, airports, ports, or terminals. 3.2 Wheeled car rolermobileforspecialpurpose Driven by power, the design has a special structure and special functions, equipped with wheels, only the presence (factory) within the driving and engaged in the production of the wheel Special vehicles. Including forklift, push car, tractor, van, dump truck, clean car, sprinkler, wheel loader, wheeled excavator, wheel Wheel loaders, wheeled bulldozers, wheeled graders, wheeled scraper, wheeled pipe machines, wheeled stabilized soil mixers, wheeled rollers, wheels Type paver, wheeled road milling machine, wheeled road edge paving machine. 3.3 Crawler dedicated car crawlermobileforspecialpurpose Driven by power, specially designed and specialized in design, equipped with track, only in the field (factory) driving and engaged in production operations Belt special vehicles. Including crawler excavators, crawler loaders, crawler scraper, crawler bulldozers, crawler tunnel boring machines, Crawler-type pipe machine, crawler-type stable soil mixing machine. 3.4 Car motorvehicle Driven by power, with three or more wheels of the carrying vehicles, only in the field (plant) for the transport of personnel, goods and other special use. Including buses, trucks, dump trucks and so on. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 16178-2011_English be delivered?Answer: Upon your order, we will start to translate GB/T 16178-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 16178-2011_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 16178-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 16178-2011?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 16178-2011 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
