GB/T 14703-2008 English PDFUS$299.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 14703-2008: Raw lacquer Status: Valid GB/T 14703: Historical versions
Basic dataStandard ID: GB/T 14703-2008 (GB/T14703-2008)Description (Translated English): Raw lacquer Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: B72 Classification of International Standard: 87.040 Word Count Estimation: 13,113 Date of Issue: 2008-08-07 Date of Implementation: 2009-03-01 Older Standard (superseded by this standard): GB/T 14703-1993 Quoted Standard: GB/T 3186; GB/T 9273; GB/T 9750 Regulation (derived from): National Standard Approval Announcement 2008 No.12 (Total No.125) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the terms and definitions related to lacquer, quality requirements, inspection methods and rules, signs, packaging, storage and transportation. This standard applies to the production of lacquer, acquisitions and sales. GB/T 14703-2008: Raw lacquer---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Raw lacquer ICS 87.040 B72 National Standards of People's Republic of China Replacing GB/T 14703-1993 raw lacquer Posted 2008-08-07 2009-03-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsIntroduction Ⅲ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 technical quality requirements 2 5 Sampling Method 2 6 Physical Testing Method 2 Traditional testing methods 7 4 8 5 Inspection Rules 9 signs 5 10 packaging, storage and transport 5 (Normative) Preparation Appendix A saturated urushiol 6 A. 1 instruments and reagents 6 A. 2 Procedure 6 Annex B (informative) lacquer containing foreign matter discrimination method 7 B. 1 sensory identification 7 B. Observation 2 frying pan 8ForewordThis standard is GB/T 14703-1993 "lacquer" amendments. This standard and GB/T 14703-1993 main technical differences. --- The standard configuration, technical elements and presentation rules according to GB/T 1.1-2000 "Standardization Guide Part 1. Standard Structure and write rules "has been modified; --- Increasing the related terms and definitions; --- Quality indicators related indicators were revised value; --- The project quality indicators have been adjusted; --- Physical and chemical test methods have been revised. Appendix A of this standard is a normative appendix, Appendix B is an informative annex. The standard proposed by China Federation of Supply and Marketing Cooperatives. The standard by the China Federation of Supply and Marketing Cooperatives Xi'an Institute of lacquer coatings. This standard was drafted. China Federation of Supply and Marketing Cooperatives Xi'an Institute of lacquer coatings. The main drafters of this standard. Seeking the fountainhead, Zhangrui Qin. This standard replaces the standards previously issued as follows. --- GB/T 14703-1993. raw lacquer1 ScopeThis standard specifies the relevant terms and definitions lacquer, quality requirements, test methods and rules, labeling, packaging, storage and transport. This standard applies to lacquer production, acquisition and sales.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 3186 Paints, varnishes and raw materials for paints and varnishes - Sampling (ISO 15528.2000, IDT) GB/T 9273 film without prints test GB/T 9750 product packaging and marking paint3 Terms and DefinitionsThe following terms and definitions apply to this standard. 3.1 Color characteristics of itself with lacquer emulsion. 3.2 Agitation standing lacquer make contact with air to cause a color change process. NOTE. The brilliant lacquer transfer process is actually the urushiol lacquer under aerobic conditions is formed enzymatically color lacquer paint phenol hydroquinone caused a color change process. 3.3 Lacquer emulsion exudes a human sense of smell can feel the taste. 3.4 roe M Heart Paint a milky liquid exists in the shape of broken crystal-like particles of different size shape more oval. 3.5 Stir lacquer, rice grain crushing star, with the flow of liquid paint to form a milky white line, outside line with light brown sand-like lines at the same time flow. NOTE. Excessive agitation, graininess will gradually disappear, but then gradually allowed to stand reproducibility. 3.6 Yarn When paint plate or iron sheet after the paint liquid, stir the paint board into the paint bucket, lifting liquid paint flowing down, fine silk drape pulled into a long, ...... |
