GB/T 24797.2-2022 PDF EnglishUS$170.00 · In stock · Download in 9 seconds
GB/T 24797.2-2022: Film for wrapping rubber bales - Part 2: Natural rubber Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid GB/T 24797.2: Historical versions
Similar standardsGB/T 24797.2-2022: Film for wrapping rubber bales - Part 2: Natural rubber---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT24797.2-2022GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 83.040.01 CCS B 72 Replacing GB/T 24797.2-2014 Film for wrapping rubber bales - Part 2: Natural rubber (ISO 20299-2:2017, MOD) ISSUED ON: OCTOBER 12, 2022 IMPLEMENTED ON: MAY 01, 2023 Issued by: State Administration for Market Regulation; Standardization Administration of the PRC. Table of ContentsForeword ... 3 Introduction ... 6 1 Scope ... 7 2 Normative references ... 7 3 Terms and definitions ... 8 4 Material ... 8 5 Physical properties ... 8 5.1 Thickness ... 8 5.2 Density ... 8 5.3 Thermal properties... 8 6 Test report ... 8ForewordThis document is drafted in accordance with GB/T 1.1-2020 "Directives for standardization - Part 1: Rules for the structure and drafting of standardizing documents". This document is Part 2 of GB/T 24797 "Film for wrapping rubber bales". GB/T 24797 has issued the following parts: - Part 1: Butadiene rubber (BR) and styrene-butadiene rubber (SBR); - Part 2: Natural rubber; - Part 3: Ethylene-propylene-diene rubber (EPDM), acrylonitrile butadiene rubber (NBR), hydrogenated nitrile-butadiene rubber (HNBR), acrylic-ethylene rubber (AEM) and acrylic rubber (ACM). This document replaces GB/T 24797.2-2014 "Film for wrapping rubber bales - Part 2: Natural rubber". Compared with GB/T 24797.2-2014, in addition to structural adjustments and editorial changes, the main technical changes are as follows: a) Change the description of the scope; clarify the applicable wrapping specifications (see Clause 1; Clause 1 of the 2014 edition); b) Change the normative references (see 5.3.2 and 5.3.3; 4.2.2 and 4.2.3 of the 2014 edition); c) Add the Clause "Terms and definitions" (see Clause 3); d) Change the thickness representation unit; add the thickness gauge (see 5.1; 4.1 of the 2014 edition); e) Add density requirements (see 5.2); f) Change the requirements for peak melting temperature (see 5.3.3; 4.2.3 of the 2014 edition). This document modifies and adopts ISO 20299-2:2017 "Film for wrapping rubber bales - Natural rubber". Compared with ISO 20299-2:2017, this document has made the following structural adjustments: - 5.1 and 5.2 correspond to 5.1 of ISO 20299-2:2017; - Clause 6 corresponds to Clause 7 of ISO 20299-2:2017. The technical differences between this document and ISO 20299-2:2017 and their reasons are as follows: - Change the expression of the scope; change the mass of the bale from 33.33 kg to 33.3 kg (see Clause 1; Clause 1 of ISO 20299-2:2017); to comply with the provisions of GB/T 1.1-2020 and GB/T 8081-2018; - Add the normative reference GB/T 1033.1-2008 (see 5.2), to specify the density determination method; - Use GB/T 19466.3 to replace ISO 11357-3 (see 5.3.3), to adapt to the regulations in China on the use of differential scanning calorimetry (DSC) to determine melting temperature; - Change "low-density polyethylene (PE-LD)" in film material TO "non-recycled low-density polyethylene (LDPE)" (see Clause 4; Clause 4 of ISO 20299-2:2017), to clearly specify the original state of the material; - Add thickness gauge (see 5.1), to provide optional thickness measuring instrument; - Change "specific gravity" to "density"; add the determination method GB/T 1033.1-2008 of density (see 5.2; 5.1 of ISO 20299-2:2017); in order to use a standardized physical quantity term and specify its determination method. Because although ISO 20299-2:2017 specifies the specific requirements for the specific gravity of the film, it does not give a determination method; - Delete the requirement for marking (see Clause 6 of ISO 20299-2:2017); because it conflicts with the specific provisions of GB/T 8082-2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. The issuing authority of this document shall not be held responsible for identifying any or all such patent rights. This document was proposed by China Petroleum and Chemical Industry Federation. This document shall be under the jurisdiction of Subcommittee 8 on Natural Rubber, National Technical Committee 35 on Rubber and Rubber Products of Standardization Administration of China (SAC/TC 35/SC 8). Drafting organizations of this document: Agricultural Products Processing Research Institute, Chinese Academy of Tropical Agricultural Sciences; Hainan Zhongxiang Technology Co., Ltd.; Hainan Natural Rubber Industry Group Jinxiang Co., Ltd.; Yunnan Natural Rubber Industry Group Jiangcheng Co., Ltd.; Xishuangbanna Sinochem Rubber Co., Ltd.; Guangdong Guangken Rubber Group Co., Ltd. Main drafters of this document: Lu Guang, Yuan Ruiquan, Li Yimin, Yang Chunliang, Film for wrapping rubber bales - Part 2: Natural rubber WARNING - Persons using this document should be familiar with normal laboratory practices. This document does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any national regulatory conditions.1 ScopeThis document specifies the material and physical property requirements for non- strippable low density polyethylene film for wrapping natural rubber bales. The function of the film is to keep the bales separated from each other during transportation and storage. This document applies to each bale of block natural rubber of 33.3 kg or 35 kg; as well as to each bale of rubber ribbed smoked sheets of 33.3 kg, 35 kg, 50 kg, and 111.11 kg; or any other bale weights as mutually agreed between the relevant parties.2 Normative referencesThe contents of the following documents, through normative references in this text, constitute indispensable provisions of this document. Among them, for dated references, only the edition corresponding to that date applies to this document. For undated references, the latest edition (including all amendments) applies to this document. GB/T 1033.1-2008 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method (ISO 1183-1:2004, IDT) GB/T 19466.3 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization (GB/T 19466.3-2004, ISO 11357-3:1999, IDT) ISO 306:2013 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) Note: GB/T 1633-2000 Plastics - Thermoplastic materials - Determination of vicat softening temperature (VST) (ISO 306:1994, IDT) ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 24797.2-2022 be delivered?Answer: The full copy PDF of English version of GB/T 24797.2-2022 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 24797.2-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 24797.2-2022_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 24797.2-2022 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version GB/T 24797.2-2022?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 24797.2-2022 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of GB/T 24797.2-2022?A step-by-step guide to download PDF of GB/T 24797.2-2022_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 24797.2-2022". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
