GB/T 14661-2007 English PDF

US$289.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 14661-2007: Cartridges, type A, for indexable inserts
Status: Valid

GB/T 14661: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 14661-2007	289	Add to Cart	3 days	Cartridges, type A, for indexable inserts	Valid
GB/T 14661-1993	679	Add to Cart	5 days	Type A cartridges for indexable inserts	Obsolete

Similar standards

GB/T 33524.2   GB/T 972   GB/T 5104   GB/Z 29014.1   GB/Z 29014.2   GB/Z 29014.100   

Basic data

Standard ID: GB/T 14661-2007 (GB/T14661-2007)
Description (Translated English): Cartridges, type A, for indexable inserts
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J41
Classification of International Standard: 25.100.10
Word Count Estimation: 11,126
Date of Issue: 2006-06-25
Date of Implementation: 2007-11-01
Older Standard (superseded by this standard): GB/T 14661-1993
Quoted Standard: GB/T 2078; GB/T 2080; GB/T 5343.1
Adopted Standard: ISO 5611-1995, MOD
Regulation (derived from): National Standard Announcement 2007 No.6 (Total No.106) (National-Standard-Commission)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the type and size of indexable type A toolholder, model representation rules, reference point K, labeled sample, basic requirements for marking and packaging, technical requirements.

GB/T 14661-2007: Cartridges, type A, for indexable inserts

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Cartridges, type A, for indexable inserts ICS 25.100.10 J41 National Standards of People's Republic of China Replacing GB/T 14661-1993 A type indexable toolholder (ISO 5611.1995, Cartridges, typeA, forindexableinserts- Dimensions, MOD) Posted 2006-06-25 2007-11-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This revised standard adopts ISO 5611.1995 "A type indexable toolholder size." This standard and ISO 5611.1995 compared to major differences are. --- Delete ISO introduction, increasing the foreword; --- "This International Standard" by "this standard"; --- Normative references to international standards in the use of alternative national standards; --- 4.1 "handle" for the re-edited, modified according to the latest standards Legend; --- Of 4.2 has been re-edited, and the "tip arc calc" into the edit table 2; --- Increase the technical requirements, marking example, marking and packaging and in Appendix A. This standard replaces GB/T 14661-1993 "A type indexable tool holder." This standard and GB/T 14661-1993 compared to the main changes are as follows. --- Modify the "scope"; --- Modify the "normative references"; --- Modify the definition of the reference point K 4.2; --- Modify the logo and packaging requirements; --- Marking requirements may increase the indexable type A toolholder; --- Abolition of the "performance test." Appendix A of this standard is an informative annex. The standard proposed by China Machinery Industry Federation. This standard tool by the National Standardization Technical Committee (SAC/TC91) centralized. This standard was drafted. Chengdu Tool Institute. The main drafters of this standard. Fan Jin. This standard replaces the standards previously issued as follows. --- GB/T 14661-1993. A type indexable toolholder

1 Scope

This standard specifies the types and dimensions of indexable toolholder A type, model representation rules, the reference point K, tag example, technical requirements, marking And packaging and other basic requirements. This standard applies to inclined mounting screws on the knife arbor or other body, were cut end (feed direction parallel to the longitudinal direction of the holder), Lateral (feeding direction perpendicular to the longitudinal direction of the holder) and the end of the lateral cut and mounted indexable toolholder.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 2078 with a hole carbide indexable inserts (GB/T 2078-1987, eqv ISO 3364. 1985) GB/T 2080 counterbore carbide indexable inserts (GB/T 2080-1987, eqv ISO 6987-1. 1983) GB/T 5343.1 indexable turning tools and tool holders - Part 1. Model represents a rule (GB/T 5343.1-2007, ISO 5608. 1995, MOD)

3 model represents rules

Indexable Type-A toolholder representation rules by GB/T 5343.1 regulations, which represents the seventh with CA indexable A type toolholder. 1) toolholder selection GB/T 2078 in the blade. 2) Selection of toolholder GB/T 2080 blade.

4 type and size

4.1 shank types and dimensions Indexable shank types and dimensions Type A toolholder according to the provisions of Figure 1 and Table 1. Millimeters Figure 1 ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 14661-2007_English be delivered?

Answer: Upon your order, we will start to translate GB/T 14661-2007_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 14661-2007_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 14661-2007_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 14661-2007?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 14661-2007 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.