GBZ29014.1-2024 English PDF

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/Z 29014.1-2024	RFQ	ASK	3 days	Cutting tool data representation and exchange - Part 1: Overview, fundamental principles and general information model	Valid
GB/Z 29014-2012	1079	Add to Cart	3 days	Cutting tool data representation and exchange -- Definitions, principles and methods for reference dictionaries	Obsolete

Similar standards

GB/T 33524.2   GB/T 5104   GB/T 972   GB/Z 29014.4   GB/Z 29014.5   GB/Z 29014.3   

Basic data

Standard ID: GB/Z 29014.1-2024 (GB/Z29014.1-2024)
Description (Translated English): Cutting tool data representation and exchange - Part 1: Overview, fundamental principles and general information model
Sector / Industry: National Standard
Classification of Chinese Standard: J41
Classification of International Standard: 35.240.50
Word Count Estimation: 522,580
Date of Issue: 2024-03-15
Date of Implementation: 2024-10-01
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GBZ29014.1-2024: Cutting tool data representation and exchange - Part 1: Overview, fundamental principles and general information model

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
GB /Z 29014.1-2024.Cutting tool data representation and exchange Part 1.Overview, basic principles and general information model ICS 35.240.50 CCSJ41 Guiding technical documents of the People's Republic of China on national standardization Cutting tool data representation and exchange Part 1.Overview, basic principles and general information model (ISO 13399-1.2006, IDT) Released on 2024-03-15 2024-10-01 Implementation State Administration for Market Regulation The National Standardization Administration issued

Table of Contents

Preface III Introduction IV 1 Scope 1 2 Normative references 1 3 Terms and definitions 3 4 Basic Concepts and Assumptions 3 5 Information requirements 5 5.1 Functional Unit 5 5.2 Application Objects 9 6 Application Interpretation Model 73 6.1 Mapping Specifications 73 6.2 Short List 246 Appendix A (Normative) AIM Long Form 314 Appendix B (Normative) AIM Short Name 438 Appendix C (Normative) ARMEXPRESS List 445 Appendix D (Informative) ARMEXPRESS-G Figure 464 Appendix E (Informative) AIMEXPRESS-G Figure 484 References 515

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document is part 1 of GB /Z 29014 "Cutting tool data representation and exchange". GB /Z 29014 has been published in the following parts. --- Part 1.Overview, basic principles and general information model; --- Part 2.Reference dictionary for cutting items; --- Part 3.Tool item reference dictionary; --- Part 4.Adaptation item reference dictionary; --- Part 5.Assembly item reference dictionary; --- Part 100.Definitions, principles and methods of reference dictionaries. This document is equivalent to ISO 13399-1.2006 "Cutting tool data representation and exchange Part 1.Overview, basic principles and general requirements" Information Model", the file type was adjusted from ISO standard to my country's national standardization guiding technical document. The following minimal editorial changes were made to this document. --- Incorporate the revised contents of ISO /T S13399-1.2006/Amd1.2010 and ISO /T S13399-1.2006/Cor1.2008 For the corrigendum to Cor2.2011, the outer margins of the clauses involved are marked with vertical double lines (‖). Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document was proposed by the China Machinery Industry Federation. This document is under the jurisdiction of the National Technical Committee for Standardization of Cutting Tools (SAC/TC91). This document was drafted by. Chengdu Yigao Intelligent Technology Co., Ltd., Chengdu Tool Research Institute Co., Ltd., Shanghai Jiaotong University, Sichuan University School, Chengdu Tool Testing Institute. The main drafters of this document are. Xiao Wenjun, Tian Liang, Chen Ming, An Qinglong, Ming Weiwei, Guo Zhixing, Xu Gang, Shen Shichang, and Chen Wenlang.

Introduction

GB /Z 29014 provides a method for describing various data related to cutting tools and cutting tool assemblies by providing the information structure required. A method for realizing the informational expression of cutting tool data (including all items between the workpiece and the machine tool). Replaceable cutting items), solid tools (e.g. solid drills and solid end mills), assembly tools (e.g. boring bars, indexable drills and Information on indexable milling cutters), adapters (e.g. milling shanks and chucks), components (e.g. washers, screws and clamps) or any combination of these can be included. Exchange. It is intended to facilitate the use, processing and exchange of cutting tool data within and between manufacturers, distributors and users. GB /Z 29014 "Cutting tool data expression and exchange" consists of 6 parts. --- Part 1.Overview, basic principles and general information model. The purpose is to provide a basis for the expression and exchange of cutting tool data. These principles and general information model are used for other parts of GB /Z 29014. --- Part 2.Cutting project reference dictionary. The purpose is to provide a reference dictionary for cutting projects to support the use of The general information model defined in GB /Z 29014.1. --- Part 3.Tool project reference dictionary. The purpose is to provide a reference dictionary for tool projects to support the use of The general information model defined in GB /Z 29014.1. --- Part 4.Adaptation project reference dictionary. The purpose is to provide a reference dictionary for adaptation projects to support the use of The general information model defined in GB /Z 29014.1. --- Part 5.Assembly Item Reference Dictionary. The purpose is to provide a reference dictionary for assembly items to support the use of The general information model defined in GB /Z 29014.1. --- Part 100.Definitions, principles and methods for reference dictionaries. The purpose is to provide specifications for the creation of reference dictionaries to support the use of The general information model defined in GB /Z 29014.1. A cutting tool with a cutting edge is used on a machine tool to remove workpiece material through the shearing action at the cutting edge of the tool. The data includes characteristics of the tool and its use, including but not limited to geometric and dimensional data, identification and name data, miscellaneous and spare parts data, cutting Material data and component connectivity. Understanding and evaluating these characteristics helps in making manufacturing decisions and executing manufacturing operations. The use of tool information models established by GB /Z 29014 will provide users with higher productivity, just like the tools. Effective management will improve the management of the tools themselves. Using a tool information model will enable the identification of the “right” tool for each operation, from tool selection to The tool user will receive planning, machine tool setup, tool maintenance and reuse from the tool supplier, with short lead times, high reliability and product quality. To benefit from the improved support provided, these suppliers will be able to provide standard information products to accompany their tool products. The machine interface will be more effective. The representation of product data is defined in ISO 10303, which specifies computer-interpretable tables of product data containing product information. The purpose is to provide a neutral mechanism for describing the entire life cycle of a product. It also serves as the basis for the realization and sharing of product databases and as the basis for archiving (ISO 10303-1). This document uses the following sources from ISO 10303. a) the EXPRESS expression language defined in ISO 10303-11; b) the data exchange file formats defined in ISO 10303-21 and ISO 10303-28; c) The integrated common resources given in parts ISO 10303-40 to ISO 10303-56. GB /Z 29014 series is intended for use by tool producers, suppliers, manufacturers and manufacturing software developers. The role of the tool in exchanging cutting tool data and potential user views is shown in Figure 1. or improve some manufacturing activities, including. ---Integration and sharing of cutting tool and assembly data between different stages of the production cycle and different software applications; ---Import cutting tool supplier data directly into the customer database; ---Management of cutting tool information from multiple sources and applications. Figure 1 The role of GB /Z 29014 in the exchange of tool data and potential user opinions Although the use of GB /Z 29014 can facilitate the creation of electronic catalogs, it does not specify the rules or procedures for creating electronic catalogs. Defined in ISO 13584. Since the content of the dictionary is developed in response to industrial innovations and continuous improvements in cutting tool technology, it is necessary to establish a maintenance mechanism. The structure is crucial and aims to. --- Corrected errors in entries of existing classes and attributes; ---Add new attributes to existing classes; ---Add new classes and their attributes; ---Manage the state of these properties and classes; ---Files to migrate dictionaries to subsequent versions. Since there is no corresponding maintenance organization in China, GB /Z 29014 still uses the maintenance organization of ISO 13399. Maintenance. The name, address and contact information of the organization maintaining ISO 13399 is available at. Reference dictionaries are available as EXPRESS files on the website of the maintenance agency. These files are supplementary to this document and can be used without It can be downloaded free of charge and used for displaying and exchanging tool data. Cutting tool data representation and exchange Part 1.Overview, basic principles and general information model

1 Scope

This document covers the main categories of cutting tool data and the relationships between them, providing data representation and information for these categories. The general information model for exchange, as well as an overview of the product data exchange principles used in GB /Z 29014, and the explanation of other parts of GB /Z 29014. Methods for specifying and transferring tool data. This document does not apply to. --- General data transmission and expression other than cutting tool data; --- Data describing the descriptive rules, guidelines and expert knowledge used in the design and manufacture of mechanical parts and cutting tools; ---Data that describes why specific design or manufacturing decisions were made. Exchange of tool data and specific items (cutting items, tool items, adaptation items and assembly items) as well as the terminology used to describe tools The classification and definitions are defined in other parts of GB /Z 29014 and referenced by them. GB /Z 29014 establishes a method for industrial data communication between different computer systems that is independent of any proprietary system.

2 Normative references

The contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. guages-Part 2.Alpha-3code) Note. GB/T 4880.2-2000 Language name code Part 2.3-letter code (eqvISO 639-2.1998) ISO 3002-1 Fundamentals of cutting and grinding - Part 1.Geometry of the active part of the tool - General terms, reference systems, tool Note. GB/T 12204-2010 Basic terminology for metal cutting (ISO 3002-1.1982, ISO 3002-3.1984, ISO 3002-4.1984, MOD) Note. GB/T 12204-2010 Basic terminology for metal cutting (ISO 3002-1.1982, ISO 3002-3.1984, ISO 3002-4.1984, MOD) Note. GB/T 2659.1-2022 Codes for the names of countries and regions and their administrative divisions Part 1.Country and area codes (ISO 3166-1. 2020,MOD) ISO 10303-41 Industrial automation systems and integrated product data representation and exchange Part 41.Integrated common resources. Product Note. GB/T 16656.41-2010 Industrial automation systems and integrated product data representation and exchange Part 41.Integrated common resources. Product description and supporting principles (ISO 10303-41.2005, IDT) ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GBZ29014.1-2024_English be delivered?

Answer: Upon your order, we will start to translate GBZ29014.1-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GBZ29014.1-2024_English with my colleagues?

Answer: Yes. The purchased PDF of GBZ29014.1-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GBZ29014.1-2024?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GBZ29014.1-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.