Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

GB/T 13147-2009 English PDF

Q: How long will the true-PDF of English version of GB/T 13147-2009 be delivered?

Upon your order, we will start to translate GB/T 13147-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Q: Can I share the purchased PDF of GB/T 13147-2009_English with my colleagues?

Yes. The purchased PDF of GB/T 13147-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Q: Does the price include tax/VAT?

Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries). Avoidance of Double Taxation Agreements (DTAs) between Singapore and 100+ Countries: https://www.iras.gov.sg/taxes/international-tax

Q: Do you accept my currency other than USD?

Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Q: Should I purchase the latest version GB/T 13147-2009?

Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 13147-2009 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.

US$369.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 13147-2009: Specification for welding of copper and copper alloy clad steel plates
Status: Valid

GB/T 13147: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 13147-2009	369	Add to Cart	3 days	Specification for welding of copper and copper alloy clad steel plates	Valid
GB/T 13147-1991	439	Add to Cart	4 days	The specification for welding of copper and copper alloy clad steel plate	Obsolete

Similar standards

GB/T 7094 CB 1146.9 GB/T 17435 GB/T 13149 GB/T 13148

Basic data

Standard ID: GB/T 13147-2009 (GB/T13147-2009)
Description (Translated English): Specification for welding of copper and copper alloy clad steel plates
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: U05
Classification of International Standard: 47.020.01
Word Count Estimation: 16,132
Date of Issue: 2009-03-23
Date of Implementation: 2009-11-01
Older Standard (superseded by this standard): GB/T 13147-1991
Regulation (derived from): National Standard Approval Announcement 2009 No.4 (Total No.144)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the copper and copper alloy clad steel plate (hereinafter referred to as copper clad steel plate) welding material, welder, preparation before welding, welding, welding quality inspection and repair welding defects and other technical requirements. This standard applies to the total thickness of more than 8mm, complex layer of copper or copper alloy, grass is carbon steel or low alloy copper clad steel plate welding. This standard is not specified in other copper clad steel plate welded can also reference used.

GB/T 13147-2009: Specification for welding of copper and copper alloy clad steel plates

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Specification for welding of copper and copper alloy clad steel plates ICS 47.020.01 U05 National Standards of People's Republic of China Replacing GB/T 13147-1991 Copper and copper alloy clad steel plate welding requirements Posted 2009-03-23 2009-11-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard replaces GB/T 13147-1991 "copper and copper alloy clad steel plate welding conditions." This standard compared with GB/T 13147-1991, the main changes are as follows. --- Standard name changed to "copper and copper alloy clad steel plate welding technical requirements"; --- Adjusted normative references; --- Table 1 in Appendix A to informative; --- Increasing the helium gas welding protection; --- Modify requirements buffer layer weld thickness; --- Modify the provisions of the bending test at room temperature; --- Security to press GB 9448 "welding and cutting safety" requirement. Appendix A of this standard is an informative annex. The standard proposed by China Shipbuilding Industry Corporation. This standard by the National Standardization Technical Committee Marine boat marine materials application process Technical Committee (SAC/TC12/SC4) Centralized. This standard was drafted. China Shipbuilding Industry Corporation seventh twenty-five Institute. The main drafters of this standard. Wang Xiaohua, Jiang Chengyu, Chao, Houfa Chen, Zheng Xiaojun, Zhang Lei, Wang Ting, Yan Keng. This standard replaces the standards previously issued as follows. --- GB/T 13147-1991. Copper and copper alloy clad steel plate welding requirements

1 Scope

This standard specifies the materials copper and copper alloy clad steel plate (hereinafter referred to as copper clad steel) welding, welder before welding preparation, welding, soldering Quality inspection and defect repair welding and other technical requirements. This standard applies to the total thickness of more than 8mm, clad copper or copper alloy, carbon steel or base layer of copper low alloy steel composite plate welding Connection. This standard is not provided for other welding copper-steel composite panel may also refer to use.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 985.1 gas welding, arc welding, gas welding and beam welding Recommended groove (GB/T 985.1-2008, ISO 9692-1.2003, MOD) GB/T 985.2 SAW recommended groove (GB/T 985.2-2008, ISO 9692-2.1998, MOD) GB/T 2650 welded joint impact test method (GB/T 2650-2008, ISO 9016.2001, IDT) GB/T 2651 welded joint tensile test method (GB/T 2651-2008, ISO 4136.2001, IDT) GB/T 2653 welded joint bending test method (GB/T 2653-2008, ISO 5173.2000, IDT) GB/T 3125 White copper GB/T 3323 metal fusion welded joints radiography GB/T 3670 Copper and copper alloys GB/T 4842 Ar GB/T 4844.2 pure helium GB/T 4844.3 high purity helium GB/T 5117 carbon steel electrode GB/T 5118 Low Alloy Steel Electrode GB/T 5231 Wrought copper and copper alloy chemical composition and shape of the product GB/T 5235 and processing of nickel and nickel alloy chemical composition and shape of the product GB/T 5293 carbon steel submerged arc welding wire and flux GB/T 6052 industrial liquid carbon dioxide GB 9448 Welding and Cutting Safety GB/T 9460 copper and copper alloy wire (GB/T 9460-2008, ISO /DIS24373.2007, MOD) GB/T 12470 low alloy steel submerged arc welding wire and flux GB/T 13238 copper-steel composite plate GB/T 14957 fusion welding wire GB/T 15620 nickel and nickel alloy wire (GB/T 15620-2008, ISO 18274.2004, MOD) GB/T 16957 clad steel plate welded joints Mechanical tests GB/T 21653 nickel and nickel alloy wire drawing and wire rod (GB/T 21653-2008, ISO 9724.1992, MOD) JB4708 steel pressure vessel welding procedure qualification JB/T 4730.2 Non-destructive testing of pressure equipments - Part 2. ray detector ......

Image

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 13147-2009_English be delivered?

Answer: Upon your order, we will start to translate GB/T 13147-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 13147-2009_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 13147-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 13147-2009?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 13147-2009 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.