GB/T 4460-2013 English PDFUS$649.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 4460-2013: Mechanical drawings -- Graphical symbols for kinematic diagrams Status: Valid GB/T 4460: Historical versions
Basic dataStandard ID: GB/T 4460-2013 (GB/T4460-2013)Description (Translated English): Mechanical drawings -- Graphical symbols for kinematic diagrams Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J04 Classification of International Standard: 01.100.20 Word Count Estimation: 28,258 Older Standard (superseded by this standard): GB/T 4460-1984 Quoted Standard: GB/T 4457.4; GB/T 4459.4; GB/T 17450 Adopted Standard: ISO 3952-4-1997, NEQ Regulation (derived from): National Standards Bulletin No. 25 of 2013 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the graphical symbols used in the kinematic diagram. This standard applies to draw kinematic diagram. GB/T 4460-2013: Mechanical drawings -- Graphical symbols for kinematic diagrams---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Mechanical drawings. Graphical symbols for kinematic diagrams ICS 01.100.20 J04 National Standards of People's Republic of China Replacing GB/T 4460-1984 Mechanical Drawing Kinematic diagrams - Graphical symbols (ISO 3952-4.1997, Technicaldrawings-Simplifiedrepresentationfor kinematicsPart 4. Miscelaneousmechanismsandtheircomponents, NEQ) Issued on. 2013-12-17 2014-10-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsIntroduction Ⅲ 1 Scope 1 2 Normative references 1 3 Chart 1 4 member institutions Kinematic Diagram Graphical symbols 1 5 deputy campaign schematic graphic symbols 3 Graphical symbols and diagrams 6 member connecting part 4 More than seven rod member and an integral part of the diagram graphic symbols 5 8 friction mechanism and the gear mechanism schematic graphical symbols 8 9 cam mechanism diagram graphic symbols 13 10 Geneva mechanism and ratchet mechanism schematic graphical symbols 14 11 couplings, clutches and brakes diagrams Graphical symbols 15 12 other agencies and components diagrams Graphical symbols 17ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard replaces GB/T 4460-1984 "mechanical drawing Kinematic Diagram symbol." This standard and GB/T 4460-1984 compared to the main technical changes are as follows. --- The standard name was changed to "mechanical drawing Kinematic diagrams - Graphical symbols"; --- Increase the "scope", "Normative references" and add relevant content; --- Increased Chapter 3, "line graph", and add relevant content; --- Revised Chapter 4 ~ Chapter 12 chapter name, consistent with the standard name; --- Increased in Tables 1 to 9 of the table name; --- Revised Table 1 "reciprocation" Legend number is 4.9, the table classification has been adjusted; --- Increased 12.1 a basic symbol table belt drive 9 to the ISO 3952-4.1997 agreement; --- An increase of 12.7 points in Table 9 head of symbols available to the ISO 3952-4.1997 agreement; --- Included in Appendix A to Chapter 9 of the standard text. This standard is prepared to re-translate the reference ISO 3952-4.1997 "Kinematics simple notation - Part 4. complex organization and their components" from the Grass, belongs not equivalent. This standard by the National Technical product documentation Standardization Technical Committee (SAC/TC146) and focal points. This standard was drafted. the machine Productivity Promotion Center, Beijing Branch New Era Information Technology Co., Hefei, Beijing Joint Information Technology Co., The company, China Electronics Technology Group Corporation 28th Research Institute, Anhui Bolton Heavy Industries Co., Ltd., Anhui Hongqiao Metal Manufacturing Co., Ltd., co Fertilizer Industry University, Jiangsu Institute of Technology, Dalian Maritime University. The main drafters of this standard. thanks to Yang, Li Daisong, Shen Mei, Huxiang Tao, Cheng May Fourth Movement Zhang Xiangxiang, Nigel, Han Zhenyu, Yuchang Guo, Jin Chenyi, Like Shun, Liu Jing, Zhang Hongqi, Gao Hongwei, Li Xue Jing, Wang Huai Germany, Zou Yutang. This standard replaces the standards previously issued as follows. --- GB/T 4460-1984. Mechanical drawings motion Graphical symbols for diagrams1 ScopeThis standard specifies the kinematic diagram graphic symbols used. This standard applies to Draw the Kinematic diagram.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 4457.4 Mechanical drawings Fatou line GB/T 4459.4 Mechanical drawings spring notation GB/T 17450 Technical Drawing Chart Chart 3 3.1 constituting the mechanical motion Graphical symbols for diagrams of plots shall comply with GB/T 4457.4 and GB/T 17450 of. Chart 3.2 application graphic symbols represent the axis, double bar symbol thick solid line (2d, d is the thick solid line width) said.4 member institutions Kinematic Diagram Graphical symbolsGraphical symbols for kinematic diagrams member institutions Table 1. Table 1 Graphical symbols for kinematic diagrams member institutions Article No. Name Symbol Remarks basic symbols available 4.1 linear motion trajectory Curvilinear motion 4.2 point movement represents a point along Trajectory Points Instantaneous 4.3 intermediate position pause Linear Motion Rotary motion Stay neutral position 4.4 4.5 travel limit position ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 4460-2013_English be delivered?Answer: Upon your order, we will start to translate GB/T 4460-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 4460-2013_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 4460-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 4460-2013?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 4460-2013 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
