GB 24943-2010 English PDFUS$229.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB 24943-2010: Safety signs for tri-wheel vehicles and low-speed goods vehicles Status: Valid
Basic dataStandard ID: GB 24943-2010 (GB24943-2010)Description (Translated English): Safety signs for tri-wheel vehicles and low-speed goods vehicles Sector / Industry: National Standard Classification of Chinese Standard: T54 Classification of International Standard: 65.060 Word Count Estimation: 10,150 Date of Issue: 2010-08-09 Date of Implementation: 2011-01-01 Quoted Standard: GB 10396-2006 Regulation (derived from): Announcement of Newly Approved National Standards No. 3, 2010 (No. 158 overall) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This Chinese standard provides three speed goods vehicles and the role of safety signs, type, color, use principles. This standard also provides for at least three cars and low-speed trucks should use safety signs and typical examples. This standard applies to three cars and low-speed vehicles (hereinafter referred to as vehicles). GB 24943-2010: Safety signs for tri-wheel vehicles and low-speed goods vehicles---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Safety signs for tri-wheel vehicles and low-speed goods vehicles ICS 65.060 T54 National Standards of People's Republic of China Three-wheeled vehicles and low-speed vehicles with safety signs Issued on. 2010-08-09 2011-01-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThe standard Chapter 5, Chapter 6, and 7.1 are mandatory, others are recommended. The standard proposed by China Machinery Industry Federation. The low standard by the National Automotive Standardization Technical Committee (SAC/TC234) centralized. This standard is drafted by. Ziyang South Chun Automobile Co., Ltd., farm vehicles Machinery Industry Development Research Center. Participated in the drafting of this standard. Shandong Shifeng (Group) Co., Ltd., Shandong five levy Group Co., Ltd., Chengdu ace Automotive Group Co., Ltd., Shandong Automobile Co., Ltd. Ling Tang Jun Europe. The main drafters of this standard. Dingji Kang, Zhang Xian Sheng, Lin Lianhua, Wang Xia people, Weng Li, Sheng new car. Three-wheeled vehicles and low-speed vehicles with safety signs1 ScopeThis standard specifies the role of three-wheeled vehicles and low-speed vehicle safety signs, type, color, use principles. This standard also provides for three Wheel cars and low-speed vehicles at least should use safety signs and typical examples and the like. This standard applies to three-wheeled vehicles and low-speed vehicles (hereinafter referred to as vehicles).2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB 10396-2006 agricultural and forestry tractors and machinery, lawn and garden equipment - Safety signs and hazard pictorials - General principles (ISO 11684.1995, MOD) Role 3 safety signs Safety throughout the vehicle design, manufacture, operation, instructions and inspection process. Under unduly reduce product features, the turn may pass It has been designed to reduce the risk, including through the selection of an appropriate design of the structure to avoid or reduce the risk as much as possible, by reducing operator involvement in the danger zone The need to limit people at risk; through the use of safety devices (guards, safety devices) to avoid or reduce the risk. Although the vehicle has taken appropriate design of the structure and safety guards, but there may still be residual risk, using information (including safety standards Chi) is used to warn the operator about the residual risks and other persons present. Safety signs role is as follows. --- A reminder of the presence or potential danger; --- Indicates danger; --- Description of the nature of risk; --- Explain the consequences of possible danger potential harm; --- How to remind people to avoid the danger.4 types of safety signs4.1 Safety Signs There are four standard types. --- Symbols and text with a band consisting of two belt safety signs; --- Symbols with graphics and text with a band consisting of three belt safety signs; --- With graphics and text with a belt consisting of two safety signs; --- Consisting of two graphics with two belt safety signs. 4.2 Each type of safety signs shall comply with the provisions of GB 10396-2006 4.4 to 4.7. 4.3 safety flag with symbols, graphics, tape, with the text content and composition should be consistent with GB 10396-2006 for the first 5-7 chapters Provisions.5 Signs of safety colors and sizes5.1 contains a degree of safety signs safety signs the word color of each part should meet the requirements in Table 1. Table 1 safety signs various parts of the color Place The degree of risk Danger Warning Note Orange yellow sign with red background The degree of danger signs Words White Black Black Security alert triangle white background Black Red orange yellow exclamation point Graphics with background/graphics for graphic white/black Text with a background/character with text black White White/black Border Red Orange Yellow 5.2 does not contain a degree of safety signs safety signs the word color and other requirements should be consistent with the provisions of GB 10396-2006 in Chapter 9. 5.3 dimensions of safety signs shall comply with GB 10396-2006 in Chapter 10.6 Use Principles6.1 Safety signs shall be reasonable and against residual risks that may exist, safety signs should not be used to make up for vehicle safety and protective equipment design defects Opposed deletion. 6.2 Safety signs can be used separately, "danger", "warning", "CAUTION" level of risk one flag word mark and the likelihood of risk Risk may cause the relative severity of the consequences. --- The degree of danger signs word "Danger" indicates if not avoided, will result in critical danger of death or serious injury cases. Away from the danger Flag of the word "danger" to determine the safety signs can not be abused, and only the most severe in the presence of dangerous situations in order to use; --- The degree of danger signs word "Warning" indicates if not avoided, may result in potentially dangerous situations in death or serious injury. The danger The degree of danger signs word "warning" to determine the degree of risk is determined by the ratio of the word mark "dangerous" risk of causing a risk of injury or death To a lesser extent; --- The degree of danger signs word "Note" indicates if not avoided, may result in low or moderate injury potentially hazardous situation. "Note Italy "can also be used to alert to avoid harm to people and events related to the non-secure operation. 6.3 Safety signs shall be as close as possible for the dangerous parts, to facilitate the operator to identify safety information indicated by signs. 6.4 safety signs should be distinct, visible, readable, and background color settings at the position obvious contrast, should be protected so that the maximum extent possible It will not be damage and wear, and appropriate long life expectancy. 6.5 safety flag should not be set on a removable vehicle components. 6.6 based on factors such vehicle structure characteristics, uses, use conditions, rational design safety signs, safety signs to make the most efficient pass-through security information. Safety signs should be used in preference to visualize the graphics. Danger graphic design and drawing methods should follow GB 10396-2006 Annex D Principles laid down. 6.7 Safety signs shall be provided on the vehicle. Vehicle operator's manual shall give the use of safety signs icon interpretation in the car Check the vehicle's location and the detailed description of maintenance and replacement issues.7 use of safety signs and typical examples7.1 essential safety signs 7.1.1 Tipper vehicle compartment front portion or the vicinity of the position should be clearly set safety signs. Typical examples of safety signs may be used as shown in Figure 1, The degree of risk compartment can also be used as "warning" safety signs, and with appropriate graphics and text description of danger "; Fig. 2, Fig. 3 or 4 Lifting process, shall not enter the danger zone. Before entering the cabin under maintenance or repairs should be reliable locking locking device (or should be reliable plug security Full locking device; or application security locking means locking hydraulic lifting cylinder). " 7.1.2 reversible cab vehicle equipped, near cab tilting mechanism should be set up safety signs. Typical examples of safety signs may be used Figure 5 or Figure 6; degree of risk may also be used as "warning" safety signs, and with appropriate graphics and text description of the risk of "cab Flip process, shall not enter the danger zone (or keep a safe distance with the vehicle). " 7.1.3 The operator stand near the outside of the vehicle engine can reach evaporation tank mouth or hot surfaces should be set up safety signs. be usable Typical examples of safety signs shown in Figure 8. The degree of risk can also be used as "CAUTION" safety signs and hazard pictorials appropriate description And the words "away from high temperature steam (or hot surfaces)." 7.1.4 the vehicle engine is running or maintenance process, will produce safety guards removed or open dangerous security should Set security on your device or dangerous signs nearby. Typical examples of safety signs may be used as shown in FIG. 9 to 12. It may also be dangerous journey Degree of "Warning" safety signs, and with appropriate graphics and text description of danger "when the engine is running, can not be removed or open security device Home. " 7.2 selection of safety signs 7.2.1 The operator stand near the mouth of the fuel tank outside of the vehicle can reach can be set safety signs. Typical examples of safety signs may be used as Figure 7. The degree of risk can also be used as "CAUTION" safety signs, and with appropriate graphics and text description of the risk of "fuel tank Easy Fuel, away from fire or open flame. " 7.2.2 driver at the wheel ride obvious visual site, read the safety signs can be set to remind the instructions for use. Typical usable Safety signs Example 13 or 14 as shown in FIG. Near the high-pressure liquid pipe and fittings may be provided 7.2.3 Typical safety signs shown in Fig. 15. 7.2.4 nearby vehicle key switch can be set to a typical safety signs shown in Figure 16. 1 car lifting process, shall not enter the danger zone. By entering the cabin for maintenance or repairs before, We need support from the bumper 2 car lifting process, shall not enter the danger zone. By entering the cabin for maintenance or repairs before, Locking means to lock the lifting cylinders with safety 3 car lifting process, shall not enter the danger zone. By entering the cabin for maintenance or repairs before, Safety locking device must be plugged 4 car lifting process, shall not enter the danger zone. By entering the cabin for maintenance or repairs before, You must be reliable locking locking device 5 cab tilting process, Shall not enter the danger zone Figure 6 cab tilting process, Keep a safe distance from the vehicle Figure 7 flammable fuel in the fuel tank, Keep away from fire or open flame 8 high-temperature steam (or hot surfaces) It can cause burns, away from heat Steam (or hot surfaces) FIG. 9 when the engine is running, Do not open or remove the safety shield 10 when the engine is running, Do not open or remove the safety shield 11 when the engine is running, Do not open or remove the safety shield 12 when the engine is running, Do not open or remove the safety shield Read 13 User's Guide 14 read the instructions 15 Avoid high-pressure liquid leakage, Read Owner's Manual for proper maintenance procedures 16 for maintenance or repairs before, Should turn off the engine and remove the key ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB 24943-2010_English be delivered?Answer: Upon your order, we will start to translate GB 24943-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB 24943-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB 24943-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
