GB 24806-2009 English PDFUS$1229.00 · In stock
Delivery: <= 7 days. True-PDF full-copy in English will be manually translated and delivered via email. GB 24806-2009: [GB/T 24806-2009] Stairlifts for persons with impaired mobility Status: Valid
Basic dataStandard ID: GB 24806-2009 (GB24806-2009)Description (Translated English): [GB/T 24806-2009] Stairlifts for persons with impaired mobility Sector / Industry: National Standard Classification of Chinese Standard: Q78 Classification of International Standard: 91.140.90 Word Count Estimation: 47,437 Date of Issue: 2009-12-15 Date of Implementation: 2010-09-01 Quoted Standard: GB/T 1243; GB 2894; GB/T 3766; GB 4208-2008; GB 4706.1; GB/T 4728.1; GB/T 5013.5; GB/T 5023.6; GB 5226.1; GB 8903; GB 14048.1-2006; GB 14048.4; GB 14048.5; GB/T 15651; GB/T 15706.2; GB/T 16895.1-2008; GB 16895.3; GB 16895.21; GB 16935.1-2008; GB 19212.1-2003; GB 19212.5; EN 12015; EN 12016 Adopted Standard: ISO 9386-2-2000, MOD Regulation (derived from): Announcement of Newly Approved National Standards No. 15 of 2009 (total 155) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This Chinese standard relates to use of staff mobility, permanently installed power-driven corridor lift safety standards, sizes and functions. GB 24806-2009: [GB/T 24806-2009] Stairlifts for persons with impaired mobility---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Stairlifts for persons with impaired mobility ICS 91.140.90 Q78 National Standards of People's Republic of China Mobility corridor to use the elevator (ISO 9386-2.2000Power-operatedliftingplatformsforpersons withimpairedmobility-Rulesforsafety, dimensionsandfunctional operation-Part 2. Poweredstairliftsforseated, standingand wheelchairusersmovinginaninclinedplane, MOD) Posted 2009-12-15 2010-09-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsPreface Ⅰ Introduction Ⅲ 1 Scope 1 2 Normative references 1 3 Terms and definitions 2 4 Basic requirements 6 5 rails and mechanical stop device 7 6 8 governor and safety gear 7 the drive unit and the drive system 9 8 electrical installation and electrical equipment 14 9 Carrier 19 Inspection and maintenance 10 23 11 Technical Paper 24 12 logo, cautions, and instructions for use 25 Appendix A (informative) to select and purchase the applicable corridor lift guide 31 Annex B (informative) before delivery inspection recommendations 32 Annex C (informative) dedicated operating devices, switches and sensors selected 33 recommendations Annex D (informative) during use regular inspection and maintenance 34 35 certificate purchaser/use of personnel acceptable Appendix E (normative) delivery Annex F (normative) safety circuit circuit design, component failure analysis and circuit 36 The different requirements of Annex G (informative) private spaces and public places Summary 40 References 41ForewordThe standard Chapter 1, Chapter 2, Section 3, Appendix A, Appendix B, Appendix C, Appendix D, Appendix E, Appendix G and 4.12,8.12.3, 8.12.4,9.1.7,9.2.1,9.3.3,9.4.11,10.2.2,12.1 content are recommended, the rest are mandatory of. This revised standard adopts ISO 9386-2.2000 "power mobility safety personnel lifting platform, size and operating functions Regulation Fan - Part 2. corridor lift "(in English). For ease of use, this standard ISO 9386-2.2000 made the following editorial changes. --- The standard introduction to delete the ISO 9386-2.2000 Introduction This standard has nothing to do with the content, because its existence this standard No impact to understand and use. --- In this standard "Normative References" instead of using the national standard ISO 9386-2.2000's "Normative references" in the Corresponding foreign standards. --- The standard delete ISO 9386-2.2000 Terms and definitions "drive rack 3.14 drivingrack" and "tooth 3.49 With toothedbelt "2 of terms, because they do not appear in the text. --- In this standard "References" instead of using the national standard ISO 9386-2.2000's "reference" in the corresponding foreign standard. This standard ISO 9386-2.2000 made the following technical corrections, these technical differences identified in a single vertical line to which they relate Terms of margin. --- The standard Chapter 3 Terms and definitions added 3.53 maximum working load Maximumworkingload, to account for over Carrying case. --- ISO 9386-2.2000 4.8 "When the elevator corridor load for one person to use, its rated load of not less than 115kg; when Corridor provides a wheelchair lift to use to use, its rated load of not less than 150kg. If you need transport The load is unknown (as in the public areas), wheelchair platform lift corridor rated load should not be less than 225kg. " This standard is used "for the use of persons standing or sitting use the corridor should be designed to lift only one person, the rated load Not less than 115kg; take the corridor for wheelchairs to use the lift, the rated load of not less than 250kg/m2, And not greater than 350kg "in place of the standard reference prEN81-40.2007 has been modified to enhance lift safety corridor Requirements. --- The standard reference GB/T 21739-2008 in the ISO 9386-2.2000 increases the load control provisions of 4.8 "when load is large At 125% of rated load, it is considered overloaded. ", Using the maximum working load corresponding to design and test load carrying capacity Holland, in order to control the load carrier and improve safety. --- ISO 9386-2.2000 design 4.12 "motor contact device and a control device should conform to statutory electromagnetic interference suppression begging. However, the need to give adequate suppression of parts should not be used in any part of the circuit, because failure would lead From insecurity. "The standard of" electromagnetic compatibility should comply with EN12015 and EN12016 "instead, in order to improve available Operability, as well as unity and GB/T 21739-2008 standard waiting for the elevator. --- ISO 9386-2.2000 in 7.4.2 "Drive and suspension rope nominal diameter ratio of the drum bottom rope of not less than 21", the present standard Mutatis mutandis "pitch diameter drum and suspension rope nominal diameter ratio of not less than 25" instead; ISO 9386-2.2000 in 7.4.3 "Drive and suspension rope nominal diameter of the rope pulley ratio should not be less than the bottom 21", this standard with the "Festival pulley round straight Drive and suspension rope nominal diameter ratio of not less than 25 "instead of the standard reference prEN81-40.2007 and GB/T 21739-2008 has been modified in order to increase the service life of wire rope and ensure safety. --- The standard reference prEN81-40.2007 removed the ISO 9386-2.2000 in 7.6.2 "single chain drive only suspended Applies to private spaces, and the rated load of less than 125kg seat or standing platform type lifts corridor (see 6.2 and 6.6) "in order to ensure the safe operation of the lift corridor. --- ISO 9386-2.2000 in 7.8 "If the stop means and the support system arranged together, you can use the drive system A rope beads. "The standard of" the system should have at least 2 ropes of beads, respectively, for supporting and hanging corridor lifts, rope beads It should be guided over the entire length. "Instead of the standard reference prEN81-40.2007 has been modified in order to ensure the lift corridor Safe operation. --- The standard delete ISO 9386-2.2000 in "7.9 worm - a worm-driven fan Additional requirements" and "drive chain guide 7.11 Additional requirements for moving "two drive, as well as the relevant provisions of Correspondingly, as the two drive not suitable for China Conditions, and in recent years, developed countries (regions) are no longer used. --- The standard reference prEN81-40.2007 in ISO 9386-2. Added "wheelchair platform and the ground 9.4.4.1 2000 Landing ground vertical height difference should not exceed 75mm. "In order to clarify the requirements and ensure the safe use of personnel. --- The standard reference prEN81-40.2007 in ISO 9386-2. increase the "d) wheelchair platform at the end of 9.4.7.1 2000 Frame structure near the upstairs and downstairs and side surfaces of the side surface of the guide portion; "in order to harmonize with 9.2.3.1 and 9.3.4.1. --- This standard adds 8 and 9, an example of the bell logo mark accessibility to standardize these signs. --- The standard ISO 9386-2. increased prEN81-40 2000 reference.2007 "elevator manufacturing and installation of safety norms Special passenger and cargo lifts - Part 40. mobility to use the corridor lift "and GB/T 21739- 2008 "Home elevator manufacturing and installation specifications." Appendix F of this standard is a normative appendix, Appendix A, Appendix B, Appendix C, Appendix D, Appendix E, Appendix G is an informative annex. This standard by the National Standardization Technical Committee elevator (SAC/TC196) and focal points. This standard is drafted by. Home ThyssenKrupp Elevator (Shanghai) Co., Ltd. Participated in the drafting of this standard. Hangzhou gifted Snyder Elevator Parts Co., Ltd., Shanghai Jiaotong University, Shanghai Special Equipment Inspection Technology Surgery Research Institute, China Academy of Building Research Construction Mechanization Research Branch, Suzhou southeast elevator (Group) Co., Ltd., Shanghai Mitsubishi Elevator has Ltd., Shenyang Brilliant Elevator Co., Ltd. The main drafters of this standard. Xu Zhenghao, Tian Hao, Lu Jiong, Zhu Changming, Xue Ji love, Chenfeng Wang, Ma Yiping Zhu Rong, Jia Kai.IntroductionThe standard installation position and size of the control device lifts the corridor and other parts were provisions to meet the person with reduced mobility Actual needs, as well as compliance with JGJ50-2001 "urban roads and buildings accessible design" requirements. Comply with the requirements of this corridor elevator runs at + 5 ℃ ~ + 40 ℃ indoor environment. If installed outdoors, the need to comply Keep other additional requirements. Suppose corridor elevator parts well maintained and maintain a normal working condition, despite the wear and tear and still meet the requirements. Comply with the requirements of this corridor elevator for independent mobility to use safely, if not used independently, but also in others Use the assistance. When the equipment is installed in a private place, use should be able to grasp the essentials of the operation and in accordance with the corridor lift A. 3 requirements. When the equipment is installed in public places, should provide the operating instructions or help. Selection and purchase of the applicable guidelines corridor elevator See Appendix A. Design examples of the standard for ease of illustration mentioned, are not considered unique. If there are other programs can achieve this standard safety The same requirements and operating results may also be considered. The standard general technical requirements for electrical, mechanical or building structures are not specified. This standard specifies the materials and equipment requirements to be met in order to achieve safety requirements and operational functions. This standard also specifies prevent equipment installed outdoors adversely affected demand. Mobility corridor to use the elevator1 ScopeThis standard specifies (can stand, sit or ride wheelchairs), permanently installed power inconvenient to use the drive for action lifting corridor Safety Guidelines machine, size and function. This standard applies to the following lifts corridor. a) in the corridor or inclined surface of the fixed layer between the stations run; b) rated speed not greater than 0.15m/s; c) the inclination angle with the horizontal rail is not greater than 75 °; d) by the one or more carriers or guide rail support. Note. No need to run the fence route corridor lifts.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 1243 Short pitch transmission precision roller chains, bush chains, attachments and sprockets (GB/T 1243-2006, ISO 606.2004, IDT) GB 2894 Safety Signs and use guidelines GB/T 3766 Hydraulic System General technical conditions (GB/T 3766-2001, eqvISO 4413.1998) GB 4208-2008 housing protection (IP Code) (IEC 60529.2001, IDT) Part 1 GB 4706.1 Safety of household and similar electrical appliances. General requirements [GB 4706.1-2005, IEC 60335-1. 2004 (Ed4.1), IDT] GB/T 4728.1 Graphical symbols for diagrams - Part 1. General requirements (GB/T 4728.1-2005, IEC 60617 database, IDT) GB/T 5013.5 rated voltage of 450/750V and below rubber insulated cables Part 5. Lift cables (GB/T 5013.5- 2008, IEC 60245-5.1994, IDT) GB/T 5023.6 rated voltage of 450/750V and below PVC insulated cables Part 6. Lift cables and flexible connection Cable (GB/T 5023.6-2006, IEC 60227-6.2001, IDT) GB 5226.1 Safety of machinery electrical equipment Part 1. General requirements (GB 5226.1-2008, IEC 60204- 1.2005, IDT) GB 8903 Wire Rope for Elevator (GB 8903-2005, ISO /FDIS4344.2003, MOD) GB 14048.1-2006 Low-voltage switchgear and control equipment Part 1. General (IEC 60947-1.2001, MOD) GB 14048.4 low-voltage switchgear and control equipment, electromechanical contactors and motor starters (GB 14048.4-2003, IEC 60947-4-1.2000, IDT) GB 14048.5 low-voltage switchgear and control equipment Part 5-1. Control circuit devices and switching elements - Electromechanical control circuit Road Electric (GB 14048.5-2008, IEC 60947-5-1.2003, MOD) GB/T 15651 Semiconductor devices - Discrete devices and integrated circuits - Part 5. Optoelectronic devices (GB/T 15651-1995, idtIEC 747-5-1992) GB/T 15706.2 Safety of machinery - Basic concepts, general principles for design - Part 2. Technical principles (GB/T 15706.2-2007, ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB 24806-2009_English be delivered?Answer: Upon your order, we will start to translate GB 24806-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 7 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB 24806-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB 24806-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
