|
US$154.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
YS/T 63.25-2012: Carbonaceous materials used in the production of aluminium. Part 25: Cathode blocks. Determination of expansion due to sodium penetration without application of pressure
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| YS/T 63.25-2012 | English | 154 |
Add to Cart
|
3 days [Need to translate]
|
Carbonaceous materials used in the production of aluminium. Part 25: Cathode blocks. Determination of expansion due to sodium penetration without application of pressure
| Valid |
YS/T 63.25-2012
|
PDF similar to YS/T 63.25-2012
Basic data | Standard ID | YS/T 63.25-2012 (YS/T63.25-2012) | | Description (Translated English) | Carbonaceous materials used in the production of aluminium. Part 25: Cathode blocks. Determination of expansion due to sodium penetration without application of pressure | | Sector / Industry | Nonferrous Metallurgy Industry Standard (Recommended) | | Classification of Chinese Standard | Q52 | | Classification of International Standard | 71.100.10 | | Word Count Estimation | 8,829 | | Quoted Standard | ISO 5725-2; ISO 8007-1 | | Adopted Standard | ISO 15379.2-2004, IDT | | Regulation (derived from) | Ministry of Industry and Information Technology Bulletin 2012 No. 20; industry standard filing Notice 2012 No. 10 (No. 154 overall) | | Issuing agency(ies) | Ministry of Industry and Information Technology | | Summary | This standard specifies the aluminum cathodes due to sodium penetration caused by linear expansion (ie, sodium expansion) measurement method. This standard applies to the determination of aluminum cathodes due to sodium penetration caused by linear expans | YS/T 63.25-2012: Carbonaceous materials used in the production of aluminium. Part 25: Cathode blocks. Determination of expansion due to sodium penetration without application of pressure
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Carbonaceous materials used in the production of aluminium.Part 25. Cathode blocks.Determination of expansion due to sodium penetration without application of pressure
ICS 71.100.10
Q52
People's Republic of China Nonferrous Metals Industry Standard
Aluminum Carbonaceous material
Part 25. No pressure at the bottom of sodium charcoal
Determination of expansion
Part 25. Cathodeblocks-Determinationofexpansionduetosodium
(ISO 15379.2.2004, IDT)
Issued on. 2012-05-24
2012-11-01 implementation
Ministry of Industry and Information Technology of the People's Republic of China released
Foreword
YS/T 63 "Carbonaceous material for aluminum," a total of 26 parts.
--- Part 1. firing process, firing weightlessness measurement sample measurement cathode paste and green specimens apparent density;
--- Part 2. Determination of cathode blocks and prebaked anodes room temperature resistivity;
--- Part 3. Determination of the thermal conductivity of Comparative Law;
--- Part 4. Determination of thermal expansion coefficient;
--- Part 5. Determination of pressure at the bottom there is sodium expansion of carbon block;
--- Part 6. Determination of open porosity hydrostatic law;
--- Part 7. Determination of apparent density size method;
--- Part 8. Determination of density in xylene Pyknometer;
--- Part 9. Determination of true density of helium hydrometer method;
--- Part 10. Determination of air permeability;
--- Part 11. Determination of the reactivity to air mass loss method;
--- Part 12. Determination of the reactivity prebaked anode CO2 mass loss method;
--- Part 13. Determination of Young's modulus of the static measurement method;
--- Part 14. Determination of flexural strength of three-point method;
--- Part 15. Determination of compressive strength;
--- Part 16. Determination of Trace Elements in X-ray fluorescence spectrometry method;
--- Part 17. Determination of volatile matter;
--- Part 18. Determination of moisture content;
--- Part 19. Determination of ash content;
--- Part 20. Determination of sulfur;
--- Part 21. cathode paste firing the expansion/contraction of determination;
--- Part 22. Determination of equivalent temperature roasting degree method;
--- Part 23. Determination of the reactivity to air prebaked anode thermal gravimetry;
--- Part 24. Determination of the reactivity prebaked anode carbon dioxide thermal gravimetry;
--- Part 25. Determination of no pressure sodium expansion of the bottom of the carbon block;
--- Part 26. Determination of refractories cryolite penetration ability.
Part is divided into 25 sections.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This section is non-arbitration.
This section uses the translation method identical with ISO 15379.2.2004 "carbonaceous materials used in the production of aluminum carbon block bottom - Part 2. No Pressure
At the bottom of the carbon block expansion of the sodium determination. " This part of ISO 15379.2.2004 made the following editorial changes.
--- Remove the ISO 15379.2.2004 directory, preface, introduction;
--- Standard name in accordance with the requirements of this series of standards has been modified.
The non-ferrous metal part by the National Standardization Technical Committee (SAC/TC243) centralized.
This section is responsible for drafting units. Aluminum Corporation of China Zhengzhou Research Institute, China Nonferrous Metals Industry Quality Standards and Metrology Institute
The study.
Participated in the drafting of this section. Beijing Science and Technology Co., Ltd. British Spike, Shanxi Jinyang Carbon Co., Ltd., Shandong Nanshan Aluminum shares
Limited copies.
The main drafters of this section. Zhang North Korea, warehouse Xiang-Hui, Huang Hua, Chen Hong, Wu Jianguo, on benefits such as.
Aluminum Carbonaceous material
Part 25. No pressure at the bottom of sodium charcoal
Determination of expansion
1 Scope
YS/T of the provisions of section 63 of the aluminum cathode blocks due to sodium penetration caused by the linear expansion coefficient (ie, sodium expansion) measurement method.
This section applies to the determination of aluminum cathode carbon block linear expansion due to sodium penetration (ie sodium expansion) caused by linear expansion also depends
Sampling in the direction of anisotropy.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
Accuracy ISO 5725-2 test methods and results - Part 2. Standard Methods of measurement repeatability and reproducibility of the measurement of the basic square
France (Accuracy (truenessandprecision) ofmeasurementmethodsandresults-Part 2. Basicmethodfor
thedeterminationofrepeatabilityandreproducibilityofastandardmeasurementmethod)
ISO 8007-1 carbonaceous materials used in aluminum sampling methods - Part 1. Bottom charcoal (Carbonaceousmaterialsforthepro-
ductionofaluminium-Samplingplansandsamplingfromindividualunits-Part 1. Cathodeblocks)
3 PRINCIPLE OF THE METHOD
1, the sample is immersed in the bottom of the carbon block graphite crucible initial molecular ratio of 4.0 or molten cryolite electrolyte. The entire
The system was heated to 980 ℃ ± 5 ℃, in order to 0.7A/cm2 current density electrolysis 2h. The use of a probe into the sample pores measured sodium
Expansion.
4 test device
Sodium expansion measuring test device schematic shown in Figure 1, including the following sections.
4.1 Muffle furnace. capable of heating to 980 ℃, the molten salt temperature gradient less than 10 ℃.
4.2 muffle furnace temperature control device. For temperature controlled at 980 ℃ ± 5 ℃.
4.3 temperature measuring device. such as thermocouples, type K or S type is appropriate, at 980 ℃ when the measurement error of ± 5 ℃.
4.4 graphite crucible. diameter 90mm, height 90mm, as an anode.
4.5 Brass. diameter 14mm, inner diameter of 12mm, brass as the sample stage and measuring the expansion rate of the reference material. At the same time the power of the sample
Between the wires. Brass should end with a threaded, the length of time should be sufficient to meet the bottom of the crucible when the sample is placed on the brass can be extended out of the furnace.
4.6 expansion rod. diameter 5mm, used to measure the expansion rate of the sample. Expansion rods into the sample hole, and extending brass.
4.7 measuring devices. to observe the expansion process, the range of 10mm, the precision within the range of 1μm, may be connected to a computer or
By loggers.
4.8 Crucible base. heat-resistant steel, the anode current from the power supply to reach the graphite crucible.
4.9 graphite powder. can improve conductivity between the base and the crucible.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of YS/T 63.25-2012_English be delivered?Answer: Upon your order, we will start to translate YS/T 63.25-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of YS/T 63.25-2012_English with my colleagues?Answer: Yes. The purchased PDF of YS/T 63.25-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|