|
US$139.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
SN/T 4706-2016: Fiberboard transport containers--Tensile test for the manufacturer joint
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| SN/T 4706-2016 | English | 139 |
Add to Cart
|
3 days [Need to translate]
|
Fiberboard transport containers--Tensile test for the manufacturer joint
| Valid |
SN/T 4706-2016
|
PDF similar to SN/T 4706-2016
Basic data | Standard ID | SN/T 4706-2016 (SN/T4706-2016) | | Description (Translated English) | Fiberboard transport containers--Tensile test for the manufacturer joint | | Sector / Industry | Commodity Inspection Standard (Recommended) | | Classification of Chinese Standard | A82 | | Word Count Estimation | 6,671 | | Date of Issue | 2016-12-12 | | Date of Implementation | 2017-07-01 | | Regulation (derived from) | State-Quality-Inspection-Accredidation (2016) No.590 | | Issuing agency(ies) | General Administration of Customs | SN/T 4706-2016: Fiberboard transport containers--Tensile test for the manufacturer joint---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Standard Test Method for Tensile Strength of Transportable Packaging Fibers)
China's entry-exit inspection and quarantine industry standards
Transport packaging fiberboard box
Test method for tensile strength at joints
Published on.2016-12-12
2017-07-01 Implementation
China
The State Administration of Quality Supervision, Inspection and Quarantine issued
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
The revision of this standard adopts TAPPIT813om-04 "Test of Tensile Strength of Joints in the Manufacturing of Fiberboard Boxes for Transport Packaging".
Compared with TAPPIT813om-04, the main changes are as follows.
--- Increased normative references;
--- Added terms and definitions;
--- Increased specific parameters and requirements for tensile strength tester and cutting device;
--- Increased calculation of results;
--- Added b), c), d), and g) items of the test report;
--- Sampling and sample preparation in the original standard were divided into three parts. sampling, constant temperature and humidity treatment, and sample preparation;
--- Removed the comparability in the original standard (between materials);
--- Deleted the keywords in the original standard;
--- Deleted the original standard appendix.
This standard is proposed and managed by the National Certification and Accreditation Regulatory Commission.
This standard is drafted by the Shanghai Entry-Exit Inspection and Quarantine Bureau of the People's Republic of China and the Jiangsu Entry-Exit Inspection Inspection
Epidemic Bureau, Henan Entry-Exit Inspection and Quarantine Bureau of the People's Republic of China, China Packaging Federation Paper Products Packaging Committee.
The main drafters of this standard. Zhang Xiaorong, Wang Tao, Zhu Hongkun, Jiang Wei, Li Wei, Liu Shousheng, Wu Haiping.
Transport packaging fiberboard box
Test method for tensile strength at joints
1 Scope
This standard specifies the method for determining the tensile strength at the joints of manufacture of corrugated and compact fiberboard boxes for transport packages.
This standard applies to adhesive bonding, binding and other manufacturing connection.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article
Pieces. For undated references, the latest version (including all amendments) applies to this document.
GB/T 450 paper and paperboard samples taken and the longitudinal and lateral measurements of the sample
GB/T 10739 Standard atmospheres for the handling and testing of paper, paperboard and pulp samples
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1
Tensilestrength tensile strength
The maximum tension that a unit width of paper or paperboard can withstand before breaking under standard test methods.
4 Principle
Cut the specimen across the manufacturing joint, place the specimen on a tensile strength tester, and stretch the specimen to failure at constant speed.
Its tensile strength was measured. Damage can be completely damaged or partially damaged.
5 Instruments
5.1 Tensile Strength Tester
A sample of a certain size is stretched at a constant stretching rate for measuring the tensile strength. The tester mainly includes the following devices.
a) Tension measurement and recording device. The accuracy should be 1%.
b) Chuck. Two, in order to clamp the specimen of the specified width, each chuck should clamp the full width of the specimen along a straight line,
The specimen should not be damaged or slipped.
Note. Both chucks should be on the same plane, and during the test, the specimen should also be located on this plane. The distance between chucks should be adjusted to the specified test
Length, and deviation should not exceed ±1mm.
5.2 Cutting device
Cut the specimen to the specified size.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of SN/T 4706-2016_English be delivered?Answer: Upon your order, we will start to translate SN/T 4706-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of SN/T 4706-2016_English with my colleagues?Answer: Yes. The purchased PDF of SN/T 4706-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|