|
US$439.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
QC/T 1218-2025: Automatic dump semi-trailer
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| QC/T 1218-2025 | English | 439 |
Add to Cart
|
4 days [Need to translate]
|
Automatic dump semi-trailer
| Valid |
QC/T 1218-2025
|
Basic data | Standard ID | QC/T 1218-2025 (QC/T1218-2025) | | Description (Translated English) | Automatic dump semi-trailer | | Sector / Industry | Automobile & Vehicle Industry Standard (Recommended) | | Classification of Chinese Standard | T71 | | Classification of International Standard | 43.080.10 | | Word Count Estimation | 22,212 | | Date of Issue | 2025-05-09 | | Date of Implementation | 2025-11-01 | | Issuing agency(ies) | Ministry of Industry and Information Technology of the People's Republic of China | QC/T 1218-2025: Automatic dump semi-trailer---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/QCT1218-2025
Automobile Industry Standards of the People's Republic of China
Dump trailer
Automatic dump semi-trailer
Released on May 9, 2025
2025-11-01 Implementation
CCS T 71
ICS 43.080.10
Ministry of Industry and Information Technology of the People's Republic of China issued
Preface III
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Technical Requirements 4
5 Test methods 7
6 Inspection Rules 9
7 Identification, accompanying documents, transportation and storage 9
Appendix A (Normative) Safety Warning Signs for Dump Trailers 11
Reference 14
Table of Contents
Preface
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents"
Drafting.
Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.
This document was proposed and coordinated by the National Technical Committee for Standardization of Automotive Products (SAC/TC 114).
This document was drafted by. Shandong Changlong Automobile Manufacturing Co., Ltd., Highway Research Institute of the Ministry of Transport, Anhui Huaxing Vehicle Co., Ltd.,
Henan Juntong Vehicle Co., Ltd., Tongya Automobile Manufacturing Co., Ltd., China Automotive Research Institute Automobile Testing Center (Wuhan) Co., Ltd., CRRC Meishan Vehicle Co., Ltd.
Co., Ltd., Haiwo Machinery (China) Co., Ltd., Shandong Jilu Automobile Modification Co., Ltd., Yangzhou CIMC Tonghua Special Vehicle Co., Ltd., Zhonglu Hui
Nengde Testing and Certification Technology Co., Ltd.
The main drafters of this document are. Sun Fusen, Zong Chengqiang, Zhang Xueli, Zhang Hongwei, Song Weimei, Zhang Hao, Miao Haitian, Zhang Lei, Yang Fengqin, He Xiaosan,
Zheng Changjie, Peng Liao, Cai Lianying, Wu Shifeng, Zhang Xuejie, Jiang Wei, Liu Xun, Tian Zhongmeng, Li Qiang, Tang Shengjun, Deng Weinan, Wang Changcheng, Jiang Haitao, Zeng Xiangjing,
Park Ji-gang.
Dump trailer
1 Scope
This document specifies the technical requirements, test methods, inspection rules, marking, accompanying documents, transportation and storage of dump trailers.
This document applies to dump trailers used on roads.
2 Normative references
The contents of the following documents constitute the essential clauses of this document through normative references in this document.
For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to this document.
document.
GB 1589 External dimensions, axle loads and mass limits for motor vehicles, trailers and motor vehicle trains
GB/T 3730.1 Terms and definitions for motor vehicles, trailers and motor vehicle trains Part 1.Types
GB 4785 Regulations for the installation of exterior lighting and light signaling devices for motor vehicles and trailers
GB 7258 Technical conditions for motor vehicle operation safety
GB/T 7307 55° non-sealed pipe thread
GB 11567 Requirements for side and rear lower protection of motor vehicles and trailers
GB/T 12534 General rules for road test methods for motor vehicles
GB/T 13594 Anti-lock braking performance and test methods for motor vehicles and trailers
GB/T 13873 Test methods for road vehicles and freight trailers
GB/T 14172 Bench test method for static roll stability of vehicles, trailers and vehicle trains
GB 15741 Number plate plates (frames) for motor vehicles and trailers and their locations
GB 23254 Retroreflective markings on trucks and trailers
GB/T 23336 General technical requirements for semi-trailers
GB 25990 Vehicle rear sign plate
JB/T 5943 General technical requirements for welding parts of construction machinery
JT/T 1178.2 Safety Technical Requirements for Commercial Trucks Part 2.Towing Vehicles and Trailers
QC/T 222 Dump Truck
QC/T 484 Automobile Paint Coating
QC/T 625 Coatings and chemical treatment layers for automobiles
QC/T 29015 Technical Specifications for Dump Truck Sideboard Locking Devices
QC/T 29104 Limits of solid particle contamination of hydraulic oil in special-purpose vehicle hydraulic systems
3 Terms and Definitions
For the purposes of this document, the terms and definitions specified in GB/T 3730.1 and the following apply.
3.1
automatic dump semi-trailer
Semi-automatic unloading of cargo in a container with lifting or horizontal unloading device (conveyor belt, movable bottom plate, push plate, etc.)
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of QC/T 1218-2025_English be delivered?Answer: Upon your order, we will start to translate QC/T 1218-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of QC/T 1218-2025_English with my colleagues?Answer: Yes. The purchased PDF of QC/T 1218-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|