|
US$329.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
NB/T 11118.1-2023: EtherNet/IP communication interface and protocol of mechanical and electrical equipment in fully mechanized coal mining face - Part 1: General principles
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| NB/T 11118.1-2023 | English | 329 |
Add to Cart
|
3 days [Need to translate]
|
EtherNet/IP communication interface and protocol of mechanical and electrical equipment in fully mechanized coal mining face - Part 1: General principles
| Valid |
NB/T 11118.1-2023
|
PDF similar to NB/T 11118.1-2023
Basic data | Standard ID | NB/T 11118.1-2023 (NB/T11118.1-2023) | | Description (Translated English) | EtherNet/IP communication interface and protocol of mechanical and electrical equipment in fully mechanized coal mining face - Part 1: General principles | | Sector / Industry | Energy Industry Standard (Recommended) | | Classification of Chinese Standard | D90 | | Classification of International Standard | 73.100.01 | | Word Count Estimation | 14,159 | | Date of Issue | 2023-02-06 | | Date of Implementation | 2023-08-06 | | Issuing agency(ies) | National Energy Administration | NB/T 11118.1-2023: EtherNet/IP communication interface and protocol of mechanical and electrical equipment in fully mechanized coal mining face - Part 1: General principles
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 73:100:01
CCSD90
People's Republic of China Energy Industry Standards
Coal mine fully mechanized mining face mechanical and electrical equipment EtherNet/IP
Communication interfaces and protocols - Part 1: General
Released on 2023-02-06
2023-08-06 Implementation
Released by the National Energy Administration
table of contents
Preface III
Introduction IV
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Abbreviations 2
5 General requirements 2
6 Security requirements 3
7 data type 4
Appendix A (Informative) Basic Data Type 5
Reference 8
foreword
This document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules for Standardization Documents"
drafting:
This document is Part 1 of NB/T 11118 "EtherNet/IP Communication Interface and Protocol for Electromechanical Equipment of Fully Mechanized Coal Mining Faces":
NB/T 11118 has issued the following parts:
--- Part 1: General;
--- Part 2: Extended Object Library;
--- Part 3: Shearer Equipment Data Sheet;
--- Part 4: Hydraulic support equipment data sheet;
--- Part 5: Liquid supply system equipment data sheet;
--- Part 6: Scraper Conveyor and Reloader and Crusher Equipment Data Sheet;
--- Part 7: Mobile substation equipment data sheet;
--- Part 8: Data sheet for low-voltage AC vacuum-fed switchgear;
--- Part 9: Multi-circuit low-voltage AC vacuum electromagnetic starter equipment data sheet;
--- Part 10: Low-voltage AC vacuum electromagnetic starter equipment data sheet;
--- Part 11: Lighting Signal Integrated Protection Device Equipment Data Sheet:
Please note that some contents of this document may refer to patents: The issuing agency of this document assumes no responsibility for identifying patents:
This document was proposed by the China Coal Industry Association:
This document is under the jurisdiction of the China Coal Industry Association Standardization Expert Group:
This document is drafted by: Guoneng Shendong Coal Group Co:, Ltd:, Beijing Tianma Intelligent Control Technology Co:, Ltd:, China Coal Industry Co:, Ltd:
Industry Association Productivity Promotion Centre:
The main drafters of this document: He Haitao, Wang Kai, Feng Yinhui, Wen Liang, Jiang Yuelin, Wang Yanbin, Yu Hening, Li Shan, Wang Bo, Ren Wenqing, Yang Yang,
Wang Zhanfei, Li Bowen, Wang Xian, Ma Tao:
Introduction
NB/T 11118 "Mechanical and Electrical Equipment EtherNet/IP Communication Interface and Protocol for Coal Mine Fully Mechanized Mining Face" established the coal mine fully mechanized mining face machine
The technical specification for electrical equipment using EtherNet/IP Ethernet communication can be regarded as a reference to GB/Z 26157 (all parts) "Measurement and control digital
The expansion of Fieldbus Type 2 for Data Communication Industrial Control Systems: ControlNet and EtherNet/IP Specifications is mainly reflected in:
The wireless interface of the data link layer is specified, the object library and device profile are extended, and the data types are extended:
NB/T 11118 consists of eleven parts:
--- Part 1: General: The purpose is to determine the physical layer and data link of EtherNet/IP communication for electromechanical equipment in fully mechanized coal mining face
The road layer, network layer, transport layer, presentation layer, and application layer specify the security requirements and data types of equipment:
--- Part 2: Extending the object library: The purpose is to define the object model library suitable for the electromechanical equipment of fully mechanized coal mining face:
--- Part 3: Shearer Equipment Data Sheet: The purpose is to determine the equipment object model composition, object interface and access of the shearer
specification:
--- Part 4: Hydraulic support equipment data sheet: The purpose is to determine the equipment object model composition, object interface and access
Ask for specifications:
--- Part 5: Liquid supply system equipment data sheet: The purpose is to determine the composition of the equipment object model, object interface and access
Ask for specifications:
--- Part 6: Scraper Conveyor and Reloader and Crusher Equipment Data Sheet: The purpose is to determine the scraper conveyor and transfer machine and
Crusher device object model composition, object interface and access specification:
--- Part 7: Mobile substation equipment data sheet: The purpose is to determine the equipment object model composition and object interface of the mobile substation
and access specifications:
--- Part 8: Low-voltage AC vacuum-fed switchgear data sheet: The purpose is to determine the equipment for low voltage AC vacuum feed switch
Object model composition, object interface and access specification:
--- Part 9: Multi-circuit low-voltage AC vacuum electromagnetic starter equipment data sheet: The purpose is to determine the multi-circuit low-voltage AC vacuum
The device object model composition, object interface and access specification of electromagnetic starter:
--- Part 10: Low-voltage AC vacuum electromagnetic starter equipment data sheet: The purpose is to determine the low-voltage AC vacuum electromagnetic starter
Device object model composition, object interface and access specification:
--- Part 11: Lighting Signal Integrated Protection Device Equipment Data Sheet: The purpose is to determine the equipment for the integrated protection device of lighting signals
Object model composition, object interface and access specification:
Coal mine fully mechanized mining face mechanical and electrical equipment EtherNet/IP
Communication interfaces and protocols - Part 1: General
1 Scope
This document specifies the general requirements, security requirements and requirements for the EtherNet/IP communication interface and protocol of the electromechanical equipment in the fully mechanized coal mining face:
type of data:
This document is applicable to the mechanical and electrical equipment of fully mechanized mining face in coal mines equipped with host computer monitoring function, EtherNet/IP interface and protocol (hereinafter referred to as
equipment) or its communication, monitoring and control devices:
2 Normative references
The contents of the following documents constitute the essential provisions of this document through normative references in the text: Among them, dated references
For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to
this document:
GB/T 9387:1-1998 Information Technology Open System Interconnection Basic Reference Model Part 1: Basic Model
GB/Z 26157-2010 (all parts) Fieldbus type 2 for measurement and control digital data communication industrial control systems:
ControlNet and EtherNet/IP Specifications
MT/T 386 Test methods and judgment rules for flame retardant properties of cables used in coal mines
MT818:14 Flame-retardant cables for coal mines Unit 3: Flame-retardant communication cables for coal mines
3 Terms and Definitions
The following terms and definitions apply to this document:
3:1
class class
Represents a collection of similar system components:
Note: A class is a generalization of objects and templates that define variables and methods: All objects in a class are identical in form and behavior, but may contain different
attribute value:
[Source: GB/Z 26157:1-2010, 3:9, modified]
3:2
consumer consumer
A node that is receiving data from a producer:
[Source: GB/Z 26157:1-2010,3:17]
3:3
device device
Physical hardware connected to a network, a device may include more than one network node:
[Source: GB/Z 26157:1-2010, 3:23, modified]
3:4
Device profile deviceprofile
A collection of device-related information that provides consistent functionality across devices of the same type:
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of NB/T 11118.1-2023_English be delivered?Answer: Upon your order, we will start to translate NB/T 11118.1-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of NB/T 11118.1-2023_English with my colleagues?Answer: Yes. The purchased PDF of NB/T 11118.1-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|